Rmikaly rea-33

Q: How do i clean the print and allow the print to stay clear? when cleaning it with ipa it turns foggy. is there a better method?

Clean your print with 95% or above IPA in the first bath (you can use a soft bristled toothbrush to make sure you get the uncured resin out of the small details if necessary. Allowing IPA to stay too long on uncured resin causes cloudiness and “white-ish streaks”. After agitating your piece in the first bath, give it a quick dunk in a second bath of clean IPA (I prefer to use a misting spray bottle instead). Pat dry and or wash it in a third bath of clean, distilled water. Let it dry (or carefully blow dry with some canned air). Remove your supports and then set out in the sun or use a “curing oven” or UV nail dryer to cure. You should not have any streaks from uncured resin at this point. With transparent or translucent prints, follow up with a layer or two of UV resistant clear coat to regain your transparency or translucency. :)

Q: Abs-like resin - how to compensate for volume shrinkage/linear shrinkage in laymen's terms? i need accurate scale.

Shrinkage varies with shape and volume. Print a test model, cure it, then measure. Scale the model proportionally by the amount of shrinkage. If a part is designed at 20mm but prints at 18mm, then scale by 20/18*100. You can set the scales independently for the X, Y, and Z directions, then when you print the final model, or any subsequent copies, they will be printed precisely.

Q: Is the cured resin reasonably flexible for printing miniatures? the current Anycubic resin I am using (came with printer) is too brittle. Thanks!

I've used many bottles of this resin in grey for minis and have printed maybe 100 so far with great results but it is still brittle, so to speak. You can still knock them around a bit on the tabletop but a drop from table to floor can break off swords, arms and such. I believe this condition is native to resin printing. My resin printer is an Anycubic Photon by the way.

Q: Can i pour this into a silicone mold and make jewelry with it? I dont have a 3d printer and want the transparent uv resin for jewelry.

Maybe if it was a very shallow mold and you had a nice, strong uv lamp. The uv doesn't pass through much resin without direct contact. I would just stick with epoxy resin in a mold.

4.7/5

产品编号: 729393239

安全交易

⚡Fast 405nm curing

🎨Vivid, pure colors

📏Low shrinkage, high precision

经常一起购买

ELEGOO ABS-Like 3D Printer Resin LCD UV-Curing Resin 405nm Standard Photopolymer Resin for Mars Saturn Jupiter MSLA DLP LCD 3D Printing Grey 1000g

ELEGOO Mercury X Bundle with Separate Wash Station and Cure Station for Large Resin 3D Printed Models, Compatible with Saturn, Mars MSLA 3D Printers

ELEGOO ABS-Like 3D Printer Resin 3.0, 405nm UV-Curing Photopolymer Resin for Mars Saturn Jupiter MSLA DLP LCD 3D Printing with Strength and Toughness, High Precision, Low Viscosity, Grey 1000g

描述

⚡ Print faster, sharper, and more colorful — because your creations deserve the spotlight!

PRECISION PERFECTED - Minimized volume shrinkage ensures ultra-smooth, dimensionally accurate prints every time.
SECURE SPILL PROOF - Leak-proof, bubble-wrapped packaging guarantees safe storage and mess-free handling.
SPEED MEETS STABILITY - Rapid 405nm curing cuts print times without compromising resin hardness or reliability.
ARTISTRY IN EVERY LAYER - High-quality pigments deliver vibrant, gallery-worthy color fidelity on every model.
UNIVERSAL COMPATIBILITY - Optimized for most DLP/LCD 3D printers, especially LCD models for flawless results.

ELEGOO REA-33 resin is a 1kg ABS-like grey photopolymer designed for 3D printing with low shrinkage and high precision. Featuring rapid 405nm curing for faster print times, it offers excellent stability and hardness for reliable results. Its vivid pigments produce bright, stunning colors, making it ideal for DLP and LCD 3D printers. Packaged securely to prevent leaks, this resin combines performance and convenience for professional-grade 3D models.

规格

Manufacturer	ELEGOO
Part number	US-EL-3D-023
Item Weight	1.2 kg
Product Dimensions	15 x 8 x 8 cm; 1.2 kg
Item model number	ABS LIKE GREY
Colour	ABS Grey 1000g
Material	Resin
Wattage	40 Watt-hours
Item Package Quantity	1
Batteries included?	No
Batteries Required?	No

有问题吗？看看别人问了什么

How do i clean the print and allow the print to stay clear? when cleaning it with ipa it turns foggy. is there a better method?

Abs-like resin - how to compensate for volume shrinkage/linear shrinkage in laymen's terms? i need accurate scale.

Is the cured resin reasonably flexible for printing miniatures? the current Anycubic resin I am using (came with printer) is too brittle. Thanks!

Can i pour this into a silicone mold and make jewelry with it? I dont have a 3d printer and want the transparent uv resin for jewelry.

常见问题

TrustPilot

TrustScore 4.5 | 7,300多个评论

Meera L.

交易顺利，产品完好无损地到达。

3 周前

尤素夫·A.

总体来说，体验非常棒。会推荐给朋友和家人。

1 个月前

查看所有TrustPiLot评论

全球购物，通过 Desertcart 享受优惠

物有所值

各种产品的价格具有竞争力

全球购物

为 200 多个国家/地区的 3 亿多购物者提供服务

增强保护

深受全球购物者喜爱的值得信赖的支付方式

客户保证

深受全球购物者喜爱的值得信赖的支付方式。

沙漠车应用程序

随时随地随时随地购物。

TrustPilot

TrustScore 4.5 | 7,300多个评论

哈立德 Z.

从订购到送货的体验都很棒。强烈推荐！

1 周前

Meera L.

交易顺利，产品完好无损地到达。

3 周前

查看所有TrustPiLot评论

关于我们

客户服务

客户支持

区域访问

法律与政策

社会的

获取应用程序

Rmikaly rea-33

描述

规格

有问题吗？看看别人问了什么

常见问题