Wall Nanny - Baby Gate Wall Protector (Made in USA) Protect Walls from Pet Gates & Dog Gates - No Safety Hazard on Spindles - for Child Pressure Mounted Baby Gate for Stairs Cup Guard - White, 4 Pack

great item, holds tight and protects walls very well.

These are amazing! I have 8 of these for 2 pressurized dog gates in my personal home which I use to run a dog boarding / daycare business. I have used many pressurized dog / baby gates over the years in different doorways / arches and almost every time when I take the gate down there are indents in the wood, scratches, or paint missing as it stuck to the gate instead of the wall upon removal. Also the gates were very prone to slipping and sliding around with minimal pressure or bumping. These genius little gadgets are a dream come true! They gently grip the wall distributing the pressure to hold tighter and also not damage the door frame. I have set up and taken these down multiple times over the past few years (when I wanted to shampoo the room or move a larger piece of furniture through) and they are effortless to install / remove and come away clean every time. The dogs (and people) can bump or push on the gates and they never shift anymore. They haven’t gotten brittle or cracked in any way over the last 3 years. They looks as clean and new as when they were first purchased. The white color is bright and normal making it become almost invisible on a white gate & white wall combo. These were worth every penny paid!

The sticky adhesive from other gates ruined our walls and trim when we removed them - these are a wall and trim saver without needing any adhesive. They are sturdy enough for our animals and toddler and the gate can be moved easily. They work better than I expected!

We purchased these when we bought our gates! They are amazing. It does the job of holding your gates, Curelea and save your walls from any indentations! They are a great fit, and the price is outstanding!

Great product, helps keep the wall from getting damaged.

The media could not be loaded. These work perfect for people who can’t drill holes in walls to hold baby gate. Its secures pressure mount gate 100x better now so I don’t need to wall mount it.

We have four baby gates in our house (my wife now refers to our house as a "gated community"), and we use wall protectors for all of them. We have been quite happy with this particular rectangular model (when used in the appropriate locations -- see below). They are easy to install, their rubber grip minimizes slippage of the gate, and they leave very little marking behind on the wall when they are removed.Wall protectors come in several different shapes and sizes, which is good because baby and pet gates can be installed in different types of locations (staircases, doorways, large walls, etc.). It is important to select the proper wall protector based on where you plan to place your gate. So...---------------------------------------------------------------------------------------A FEW GENERAL PRINCIPLES ABOUT WALL PROTECTORS----------------------------------------------------------------------------------------1) Wall protectors don't just protect your walls from dents and scratches; they also usually provide a better grip between the gate and the wall. This means your toddler or pet will have a harder time pushing the gate out of place (though they will still try!).2) Almost all wall protectors will still leave a small mark on your wall, especially if it's painted drywall. There are ways to minimize the mark left behind, but it's probably unrealistic to expect absolutely no evidence that you had a gate installed. The protectors do, at least, help minimize the risk of DENTS in the wall.3) A larger wall protector will generally have a lower risk of denting your wall than a smaller one because it will distribute the pressure from the gate over a larger area of the wall.4) On the other hand, the larger the wall protector, the farther that contact point of the gate will end up being from adjacent structures like the floor. For example, with a large circular wall protector, the opening where you fit the gate's tension screw is a few inches from the edge of the protector, which means the bottom of the gate will be an inch or two off the floor. Obviously having the horizontal bar at the bottom of the gate's opening floating a few inches off the floor would create a tripping hazard!5) Therefore, in general the best wall protector to use for each of your gate's contact points is the one with the largest surface area that will fit into the space without displacing the gate. (Obviously I'm ignoring aesthetics here...)With those principles in mind, let's consider three of the most common shapes of wall protectors for baby gates and where they might best be used:1) Round: These wall protectors are usually 5-6" in diameter, with an opening in the center where you insert the gate's tension screws. Their biggest advantage is creating less pressure on your walls due to their size (which is especially important against drywall). However, they won't fit in some places and they probably shouldn't be used against the floor, where they could prevent your gate from sitting flush against the floor. So use them on your gate's upper contact points wherever you have a large wall space.2) Rectangular: These are usually about 2" x 6". They put slightly more pressure on your walls than the large circular protectors, but they fit into places the circular ones won't. I suggest using these in two types of places:- In the horizontal orientation for ALL lower gate supports, EXCEPT in places where your horizontal wall space is only a few inches (such as the bottom of a narrow door frame). This will allow you to position the gate as close to the floor as possible.- In the vertical orientation for UPPER gate supports in a narrow door frame.3) Square: These are typically about 2" x 2" -- in other words, not much larger than the gate support. I would use these in only one place: for the LOWER gate support at the bottom of a narrow door frame, where really nothing else would fit.

We got this to supplement the baby gate we're currently using to fence off the dogs while we train them to respect boundaries with our newborn.I was able to successfully set it all up together while severely sleep-deprived, though it's pretty challenging to do so incorrectly.The product paid for itself within the first ten minutes or so. Since setup was so simple, I had quickly forgotten that I installed it at all. The sleep deprivation certainly didn't help with my memory either. It was after dark when I finished, so the hallway where it sits is pitch-black when the lights are off.I was immediately reminded of the gate and Wall Nanny after blindly busting my a** all the way down the aforementioned dark hallway whilst grabbing a quick snack for myself and partner. As I sailed through the air and bounced on the floor, I had a faint vision of the Flex Tape guy as panic set in about what the walls and gate might look like."That's a lot of damage," I thought worriedly given the amount of volume my fall made throughout the house. I scrambled to my feet and fumbled for the light switch while my partner called out, "You alright?!""Yeah!" I responded excitedly as I found the gate had only moved about six inches and was still standing, with absolutely ZERO marks or damage to the gate or wall whatsoever.I was able to quickly reset the gate and used 3M tape to secure a motion light from our hallway closet above the gate and have had no issues or falls since. 10/10 product, highly recommended for new parents or anyone with sleep/memory issues.