🔩 Unlock the Power of Precision!
The EN-49248 Injector Rail Assembly Remover Tool 6706 is a must-have for automotive professionals working on Cadillac, Saturn, Pontiac, and Chevrolet direct injection engines. With its universal fitment and damage-free design, this tool ensures efficient and safe removal of injector rails, making it an essential addition to any mechanic's toolkit.
| Manufacturer | E-cowlboy |
| Brand | E-cowlboy |
| Item Weight | 1.1 pounds |
| Package Dimensions | 5.12 x 4.41 x 1.3 inches |
| Country of Origin | China |
| Manufacturer Part Number | 6706 |
M**C
Be patient
Bought 2 sets of these for a fuel rail/injector removal on a 2014 6.2 Chevy. Soaked the injectors for two days prior with penetrating oil and gently used a pry bar in conjunction with this set. Worked great. Got all the injectors out, none of them broke, took about 30 min.
B**.
Decent quality; does the job
Was pulling the injector rail on my 2014 Silverado 4.3 with 2500000 miles on itTried for hours with pry bars, wood blocks as fulcrums couldn’t get the rear most injector to budge.Ordered this tool and it works like a charm.The bolt that goes into the blocks bend a little under the load however once load was removed it was straight (did not yield)A couple tips for using. 1. I put anti seize compound on all the threads; will prevent binding/galling and make overall operation smoother. 2. Go slowly and evenly. I would tighten tool until they were under a good load then gently use the prybar on both ends of the rail, then tighten again and repeat. The first 3 or four inches come up are very slow. If you just crank down all the way and try to rush it you will probably bend the tool.
H**E
They bend and break
Wrong threads. Try to screw the hooks in perfectly straight and they instantly try to start stripping. So I have to pay money to get these sent back to either get a refund or another set. Terrible
B**N
Worked with modification
The studs that screw into the block are not fully threaded, so I had difficulty getting the hooks around the injector rail. I ended up drilling out the holes where the studs go and using some 100mm long bolts and nuts in place of the studs. Then I was able to pull the rail easily enough.
D**.
Good but didn't work for me
Wasn't compatible with chevy silverafo because you can physically remove the screw from the fuel rail. GM design.
P**C
Sort of work
It not a perfect tool, didn't totally release the rails and injectors without a great deal of additional prying with other tools
J**N
Worked well
Needed this tool to remove the fuel rail on a 3.6 direct injection GM engine. Needed to remove the fuel rail to replace the injectors. It was a little confusing since it comes with 2 types of hooks. Once I figured out which ones to use, it worked well.
J**G
Item was exactly as described and worked great
Very inexpensive and worked
TrustPilot
2 个月前
1 个月前
