Oneida Air Systems スーパーダスト代理(4/5 DIY) サイクロンセパレーター 1-3HPシングルステージ集塵機用

Oneida Air Systems スーパーダスト代理(4/5 DIY) サイクロンセパレーター 1-3HPシングルステージ集塵機用

Q: is it supposed to arrive in two pieces? mine did and appears to have been at one time hot glued together and will now not go back together easily

Certainly not how mine arrived. Mine was intact, installed easily (on top of a 30-gallon fiber drum from Grainger) and has been performing like a champ ever since. Does a much, much better job (with the same Rockler wall-mounted dust collector) as my previous "homemade" setup using a plastic drum and a pair of input/output hose connectors that sort of create a centrifugal cyclone effect.

Q: do these improve suction or flow?? i have a harbor freight collection system, flow has seemed to greatly be reduced. no clogs anywhere i see

I also have a Harbor Freight dust collector and I replaced the dust bag/filter on it with a canister filter. I recently added the Super Dust Deputy 4/5 cyclone to replace an old, less effective separator. I noticed that the suction nearly doubled - it is definitely a much more efficient design than what I had. I am using 4" hoses in my shop. I recommend the following: 1) Check that your hoses are attached to the correct fittings on the cyclone (Top opening goes to the Harbor Freight unit, side opening goes to you tools. (Note: I had to use a bungee cord to support the hose from the Harbor Freight unit because the hose's weight caused the top fitting on the cyclone to loosen.) 2) Make sure ALL joints are COMPLETELY sealed. Use X-Treme Tape® Duct Hose Wrap. It stretches and sticks to itself without adhesive. Rockler and Woodcraft as well as other stores sell it. Hope this helps.

Q: Does this collect fine dust? The rockler one does not seem to.

No cyclone separator is 100% efficient. This one is about 99% which means that 1% (mostly fine) will make its way to the vacuum filter. In my real life I am an air handling specialist, so this is just fact. Any cyclone you buy will never be 100% efficient, but this one is pretty good.

Q: Can you out a bag in the bin that the cyclone attaches to? To make emptying easier?

You could, but it would be necessary to be sure the seal at the top is complete and open the bag as far as possible. The sawdust falls into the bin, it is not blown into the bin. I have no difficulty emptying the bin without a bag in it.

4.8/5

Product ID: 732545898

Secure Transaction

Details

Brand
Oneida Air
Material
サイクロン
Compatible Devices
集塵機
Reusability
再利用可能
Number of Pieces
1

🌀4/5 inch cyclone separator inlet/outlet

⚙️1-3HP compatible power range

🇺🇸US patented durable design

Frequently Bought Together

Oneida Air Systems Super Dust Deputy Lightweight 4/5 DIY Cyclone Attachment for Single Stage 0.5 to 3HP Dust Collector, Accessory Only, Black

Fulton Woodworking Tools 4 x 20 PVC Dust Collection Hose with 4 Thumbscrew Clamps, Proudly Made in USA Puncture Resistant PVC Hose with Carbon Steel Wire, Flexible Clear PVC and Fume Collection

POWERTEC 70260 4 Inch Key Hose Clamp, Thumb Screw Key Adjustable Stainless Steel Hose Clamps for Dust Collection, Dust Collector and Dryer Vent Hose, Pipe Clamp, RV Clamp, Worm Gear Clamp, 10 pack

Description

🌀 Elevate your workspace with cyclone power – dust-free and hassle-free!

EXTEND FILTER LIFE - Prevents fine dust and debris from clogging filters, reducing maintenance frequency.
HIGH EFFICIENCY AIRFLOW - Built-in air ramp and neutral vane inlet maximize dust separation performance.
PROUDLY MADE IN THE USA - Patented technology ensures top-tier quality and reliability you can trust.
QUICK EASY INSTALLATION - Lightweight, compact design with included adapters and hardware for hassle-free setup.
PERFECT FIT FOR YOUR SETUP - Designed for 1HP to 3HP single-stage dust collectors with versatile 4/5 inch connections.

The Oneida Air Systems 4/5 DIY Cyclone Separator is a US-patented, compact dust collection upgrade designed for 1-3HP single-stage dust collectors. It features a high-efficiency air ramp and neutral vane inlet to extend filter life by capturing fine dust and debris before reaching your filter. With versatile 4/5 inch inlet/outlet adapters and lightweight construction, it offers easy installation and reliable performance for a cleaner, more efficient workshop.

Specifications

Brand	Oneida Air Systems
Model Number	AXD002
Product Dimensions	33.66 x 36.2 x 58.42 cm; 3.49 kg
Name List for Name Plates	4/5 DIY
Material	サイクロン
Quantity	1
Included Components	サイクロン、ガスケット、2 x 4インチレデューサーアダプタ、蓋取り付け金具
Item Weight	3.49 Kilograms

Have a Question? See What Others Asked

is it supposed to arrive in two pieces? mine did and appears to have been at one time hot glued together and will now not go back together easily

do these improve suction or flow?? i have a harbor freight collection system, flow has seemed to greatly be reduced. no clogs anywhere i see

Does this collect fine dust? The rockler one does not seem to.

Can you out a bag in the bin that the cyclone attaches to? To make emptying easier?

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ravi S.

I loved the variety of products available. Will definitely shop again.

2 months ago

Abdullah B.

Great price for an authentic product. Fast international shipping too!

3 weeks ago

View all Trustpilot reviews

Shop Global, Save with Desertcart

Value for Money

Competitive prices on a vast range of products

Shop Globally

Serving over 300 million shoppers across more than 200 countries

Enhanced Protection

Trusted payment options loved by worldwide shoppers

Customer Assurance

Trusted payment options loved by worldwide shoppers.

Desertcart App

Shop on the go, anytime, anywhere.

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Abdullah B.

Great price for an authentic product. Fast international shipping too!

3 weeks ago

Anjali K.

The product quality is outstanding. Exactly what I needed for my work.

1 month ago

View all Trustpilot reviews