ZELCAN 1100W Mag Drill Press, Portable Magnetic Drill Press with 1.6" Boring Diameter, Heavy Duty Magnetic Drill with 11 Drill Bits, 2700 lbf 550 rpm Electric Drilling Machine with All-Copper Motor

I ordered this to use at work in my steel shop and this is a great drill for the price!! It out drills the Metabo Mag Drill we have and the reservoir for the coolant, is a really good feature.My only 2 complaints about it is that when you shut off the magnet, the drill is still turning and fire safety reasons, it the magnet shuts off for any reason, it should trigger the drill to stop but it doesn't which is extremely dangerous. The other thing is that the on/off mechanism to use the coolant, isn't very convenient or easy to use.

Amazing drill for the price. Worked great at every possible angle.I had to do 18 back to back 11/16" holes through 5/8" steel and it didn't even blink.Handle with gloves. The bits are so sharp, one sliced through my hand just taking it out of the package.Amazon gets 1 star for delivering it though. It said next day, so I ordered it over the competitor's drill that is 1.5" shorter and they took a couple of extra days to deliver it.At 15.7" tall, it didn't fit in joist spaces, so I had to cut and patch joists that I wouldn't have needed to if it was a bit shorter.

The forward and reverse is switched but all in all the drill works fine. Super strong magnet and all around decent low end mag drill. The set screws loosen themselves over time so keep Allen’s handy and you will be fine. Runs annular bits pretty well

Efficient magnetic base. Holds very well for medium drilling without excessive downward pressure. The reverse is also a nice amenity. Have not yet used the oiler.

This drill isn’t as advertised. The magnet is weak! Used it to drill 1 1/4” holes in heavy ibeam, 80% of the time the magnet wouldn’t hold firm enough an allow the bit to walk considerably when starting the cut. 1 out of 4/5 times the magnet wouldn’t hold firm hold and would allow the drill base to rise up while drilling. We weren’t forcing the bit. The last use of this drill didn’t end well as the magnet didn’t hold and the drill fell from the topside of I beam to the ground 21’ in the air. Yes we know to use the safety lanyard and do use it when in the side of a piece of steel. Anyway the magnet isn’t strong and the drill won’t survive a fall of 21’ into concrete slab.

Excelente calidad

This was an excellent buy I am 100% satisfied

Only drilled A few 1.25" holes through 3/8 mild steel so far, but it did it with no effort. I didn't bother hooking up the automatic oiler based on other reviews, but if you're sitting next to it to work anyways it's not any extra work put a little oil on the bit.The drill has a little bit of wobble. The hole itself was decently clean, not spectacular but good enough.