TechOrbits Universal Desk Mount for Triple Monitor - Fits Three 13-30" Monitors with Swivel & Clamp

It’s fully adjustable you can tilt the monitor it works great and it is really sturdy due to the fact that you can adjust how sturdy you want it to be. It’s really easy to install and it fits the monitor perfectly the value for the money is great I would say because i bought it for 50 dollars so I can’t complain at all.

This supports my two 27" Samsung curved monitors and my one 28" Samsung flat monitor in the middle. The middle one is fairly heavy, but the outside two are reasonable. The mount could easily handle bigger, heavier monitors.his went together quickly and seems very sturdy so far. Adjustments are easy once you tune in the gas strut strength. It has a wide range of adjustment. I wish that the middle mount had more adjustment, and the adjustment for the tilt control strength/resistance was a little bit easier, but that was really just five minutes of slight struggle compared to many, hopefully, years of the mount behaving. I have so much more room on my desk and getting my monitors up higher has made me realize just how much I was slouching and getting that famous computer posture.I put this purchase off for a while, thinking it wouldn't be worth the money and I'd regret it or that this mount wasn't REALLY good enough. It's great and I'm thrilled and I haven't looked back.

Very nice, sturdy, and very sharp looking monitor stand mount! The only reason I didn't give it 5 stars is because I had some trouble steadying my 27" Dell U2710 monitor. I do not know the exact weight of the monitor but should range around the 17.02 lbs mark and that's with the stand it came with. The hinge on the Tech Orbits stand mount kept rotating forward because it couldn't support the weight. No matter how much I tried to tighten the hinge. Ultimately, I was forced to improvise (embarrassingly enough) and place a loose metal screw between the hinge to jam it/prop up the monitor and keep it from rotating forward. It's not obvious and nobody can see it unless they're looking for it but I know it's there... So yeah. My other monitors are 24" Dell monitors and the hinges weren't an issue with those after I tightened them up. However, the arms originally didn't want to stay up and there were really no instructions included on how to resolve this. I finally figured out that you have to manually tighten some knobs on the arms to improve the pressure and weight resistance. There should probably be more detailed instructions included with the packaging as I feel a less technical person would not be able to figure that out. Overall a great product and looks very nice in my home office. But, I may have to go ahead and find more lightweight monitors in the future.

I use this for two monitors and a Vesa Lap Top metal tray in the middle. Creates lots of desk area to work from. The product is higher quality than expected.

One of the best mounts for the price. It is stable and sturdy and works well with my monitors. Best part is it’s a great price!

Great product. I was able tot tighten up the strength screws on a way it just doesn't move. It looks and feels good. 2 of the 3 cable management pieces in the arms are not holding any wire at all. My workaround was to add cable management ties around those. These parts of the arm are out of sight in most setups so it shouldn't be an astetic problem. As someone else mentioned, the vesa mount piece and the arm have a little flex between them, which can rotate the monitor slightly. For me this was no problem as I have the monitors pushing against each other and therefor ensuring a straight monitor. I would highly recommend this product if you have a heavy setup. I use 3 28 inch 5 kilo monitors with ease. With tight nuts, it will probably hold 10 kilo monitors with ease too.Buying this item, I was a bit worried. Some people were complaining about monitors dropping forward. Luckily, it was fairly easy to tighten up the bolts to such extend that the monitor just doesn't move anywhere.My advice to people experiencing that problem;Plug in a screw driver at the bottom of the hinch to prevent the monitor from moving forward when tightening the nuts. If you can't get it to work, ask someone with sufficient strength and finesse. I was able to make it unmovable (even while using strength to try and adjust it a little).

UPDATE 12-26-2020: After numerous attempts to contact the manufacturer according to the instructions on their website, a year later they have still not responded. The constant clockwise sagging of the monitor has been a constant source of frustration, and my only option has been to wedge something under the right side of the monitor to keep it from tilting. That defeats the purpose of this stand and just looks junky on an otherwise clean desk. Given that I'm about ready to abandon this defective product, I'm reducing my rating to 1 star. Shame on TechOrbits for being completely absent on tech support!!Overall, this is a nice monitor stand. However, the center monitor mount swivels very easily, won't stay level and keeps tilting about 10 degrees clockwise. There is no way to lock it in place. I've contacted TechOrbits several times since December (long before COVID-19) using the contact email on the website, but haven't received ANY kind of response. I have to stick a prop under the right-hand edge of the monitor to keep from tilting, which TOTALLY DEFEATS the reason I bought this stand-- to clear off the top of my desk. Giving 2 stars because of the total lack of vendor response, leaving me stuck with a malfunctioning product.