Scosche ICFD6BN Double DIN Radio Install Dash Kit Compatible with Select 2007-14 Ford and & Mercury Vehicles with Premium Sound - Complete Car Stereo Installation Kit - See Vehicle Fit Guide in Images

Fit perfect and wiring and antenna adapter worked great

Ok

Worked out great for my 2008 Expedition

Fits my 05 F150 just fine, but sets the face of my head unit a bit too deep innthe dash, making the use of my single tiny button/knob right at the edge of the unit a bit of a pain.

The plastic installation pieces fit poorly for both the dash and aftermarket stereo(s). I’m used to having to customize pieces slightly for best fit and function, but this particular kit is probably the worst one I’ve worked with yet. I’m unsatisfied with the design and fit to say the least. Look elsewhere for a better stereo dash kit.

Alright, so got this for my ‘11 King Ranch F350 because I was balling on a budget and didn’t want to splurge on the PAC harness - I have much better things to spend 100 bucks on for this truck than a wiring harness for a radio, but I digress. This harness does NOT have the ACC pin off the red wire to bypass CANBUS in these trucks, so you’ll need to run a wire down and splice into another ACC wire on the truck instead of this harness, unless you like draining your batteries or have the brain capacity and memory to remember to turn the radio off every time you park - I sure don’t.To save you the two hours of headache, Reddit and powerstroke forum searching and several beers I had to go through - the passenger kick panel under your glovebox in the 11-16 super duties has a wiring harness by the fuse box. The purple and green striped wire is an ACC. Plus, you’ll retain the factory radio setting of the door opening shutting the radio off, which is pretty stellar.The dash kit itself definitely leaves a lot to be desired. It’s a china special, so I wasn’t expecting a lot, but the pieces certainly do not snap together, so you’re holding the side pieces onto the front dash bezel itself, which did not snap onto the radio I got, for the record, while also seating the radio in place, and getting your screws set, and getting the radio lined up and aligned correctly.Definitely would’ve returned it if I wasn’t so dedicated to just getting the darn thing in and installed, but it stays snug once it’s screwed in, and it looks fine as long as you don’t look at it too closely.For the price, you get a decent amount. The crimps are good (you’ll need more than they give you), and it does the job. If you’ve got a first gen 6.7 and you’re using a china special radio, you’ll learn a few new curse words doing this install with this kit though, that’s for sure.

Very nice fit for my Sony radio

Definitely using this kit for my car. Good kit for car radios