Prepac Sonoma 6-Drawer Double Dresser for Bedroom, Wide Chest Storage, Traditional Furniture, 17.5" D x 59" W x 29" H, Espresso

Bought this along with a mataching nightstand set. Came well packaged with no damage. Instructions are pictures only, but just take your time and you will be ok. Went together well. I also use wood glue which make a much stronger product. Took me about 4 hours to put it all together, but I take my time. This dresser is narrow at only 17 inches wide but for me will double as tv stand at foot of bed so narrow is better. Color is deep chocolate brown. Drawers are nice and slide well on metal brackets. Inside, they are 24 inches wide but only about 12 inches deep, so not a ton of storage. All partical board except for drawer sides. Well work good for 1st apartment or spare room. Since I glued 100% of the joints, its solid and will not fall apart. Product is heavy, so recomend taking out the drawers when transporting it. A brown marker, not included with mine, can be used to cover in straches. Down the road when I upgrade to something better, will either use in a spare bedroom room, maybe give away, or worst case bust apart and put in dumpster, since I dont have alot of money tied up is this.

Very very very sturdy , easy to put together and very very spacious

TLDR: this is a well designed, good quality hardware, well packaged dresser that should last for years if not moved.Cons: The dresser came with no stickers to mark the pieces like the manual suggests, there was zero marking and if you haven't put furniture together before, you will make mistakes.another potential problem is that there is zero extra hardware, not a single extra screw, if one is missing or broken or damaged, you won't be able to put it together unless you replace it.Pros:good looking simple design dresser that has no flows (beside it being made of composite wood.the manual is one of the best manuals I've seen in years in terms of ease of understanding to put things together. it is very well thought and very well drawn.the price is perfect for the quality and the end product.It took me 1.5 hours to put it together on my own.I am very pleased with it.

Absolutely awful. Now I will admit I am not a very handy person. In fact I may literally be the worst handyman on the planet. Despite this, I can typically still manufacture prefab furniture, it just takes me a lot longer than it does a normal person. Despite this, my negative rating and experience with this drawer goes well beyond my inability as you will see in this review.First off, the directions for this thing were not very clear and certainly were not helpful.While the directions have labeled pieces, the boards and pieces in the box are not. The only exception is there is an R and an L on some pieces which is actually nice.Another issue is that the dresser uses two different sized zinc cams. After spending hours on this thing (which is mostly on my inability to do mechanical work) once I got to the drawers (which is the final step), I realize that there are two different size zinc cams, because the 3 cams I have left won’t fit into the slot in the drawer.Now as I have said, I am terrible at these types of things, but I don’t feel this one can be blamed on that. These cams look identical, it just so happens one is just slightly larger than the other to the point it enough that it will not fit in the slot on the drawer. So there I am, six hours into this thing, with 3 cams that are just slightly too big for the drawer slots. Why they did this is beyond me, but it makes never want to buy another dresser from them again.This goes back to why it is an issue that they did not label pieces. Had the pieces been in bags labeled “A3” and “C8” (for example) this may have been avoided, but nothing is labeled which causes confusion, especially for someone like me.Furthermore, and something that will matter to others probably more than me, is the bottom trim piece came nearly cracked in half to the point in snapped during assembly. Now because this is going in a sports equipment room, and won’t be seen by the general public, it was not worth sending it all back as the piece is largely just for aesthetics. With that said, if this was going in an area others would see, I would have been livid that this piece came as damaged as it did and broke so easily.

Kudos to the manufacturing team at Prepac: got all the correct pieces and hardware for this dresser, everything fit well, lined up, and is solid when finally assembled. But NOT A SINGLE PART WAS LABELED. And the instructions gave no indication of front/back, inside/outside, top/bottom as parts were to be assembled and they flip diagrams with no indication. The office team at Prepac needs to step up to match the parts - heck, go look at a Lego kit for inspiration - it's not that complicated to give good instructions.

great quality dresser and easy to put together