Invision Monitor Arm Wall Mount Bracket for PC Monitor & TV - To Fit Screens 17 to 27 inch, Ergonomic Height Adjustable Single Arm Tilt Swivel & Rotate, VESA 75x75mm & 100x100mm, Weight 2-7kg [MX250]

From the minute i took this out of the box i found it to be of solid construction, and looked like a quality item.Instructions were sufficient and to the point, mounting was made easier by the small spirit level built in, although could have been better if the holes had had a little play to allow for adjustment when screwed to the wall, so make sure you drill carefully and accurately.Cable management was good, albeit a little odd with 3 securing points, 2 of which can be unclipped and placed around the cable, but the third at the wall plate needs the cables threading through.In use, whilst i only used it for a 22" monitor so had to adjust the tension as described in the instructions, it's movement was good with good range and easy to manipulate without being too free to move.It looks good and tidy in use and i'm more than happy with it.Seller information and communication was good, and delivery time was excellent

Looked at a lot of wall mounted options for a large monitor (Aurus AD27QD) before choosing this one. Very simple installation (2 screws and a built in spirit level) and very sturdy screws. Cable guides are decent and build quality of the arm is high with minimal plastic. Once installed it was easy to move around and had torsion adjustment on the main arm and the pitch.Overall very happy with the arm and for the money beats out many others which are 3x the price.

The product did what was described. The hydraulic arm was a bit of a pain during install, as I wanted to try the arm in various positions before fixing, and without a TV attached to the arm, getting it to open up required quite a bit of effort. Once installed, the hydraulic arm worked well.The product looks very well put together and some good thought has gone into the way the various nuts and bolts are separated in the packaging. This was a nice touch.My only gripe was that the bolts supplied were not quite long enough for the Samsung TV I bought. I needed M4 25-28mm bolts for that. Luckily I found some elsewhere. Is that Samsung's fault for going with different fixings?Either way - deducted a star from the score because of that.

I'm using this to mount a 27" Philips monitor to my office wall. It's so good, I've ordered another so that my primary monitor is coming off the desk too.Like all wall fixings, you do need to make sure you have something to bolt the bracket to - brick, concrete, timber studding. There are only two holes to drill. I drilled the first one, then mounted the bracket and bolted it to the wall, leaving the bolt a couple of turns from being tight. Then I marked the second hole , swivelled the bracket out of the way and drilled the second hole, first with a 4mm pilot drill, then with a 10mm drill as per instructions. Then fitted the second plug, and bolted the bracket down tight. No drama's and a solid mount.What's neat about installing this wall mount, is that the top two VESA holes are open slots, so you pop two screws into the monitor and hang the monitor off the bracket, whilst you locate and fix the last two screws. This is so much easier than other mounts I've used where you have to hold the monitor in place and try and locate the screw holes in both VESA mount and monitor at the same time.Great piece of kit.

A bit pricey but you get what you pay for a beautifully engineered and well designed product with the bonus of being made in the UK.Well packaged and with fittings for solid walls. I mounted on a stud in a plasterboard wall but using the full arm extension could still position my monitor central to the desk. I was a bit worried about the weight of my monitor (6.2kgs) but it was absolutely fine (rated to 7kgs max to be fair). The ability to raise up and down and tilt means it gives a great viewing experience. Well pleased with this purchase and would buy again!

From opening the box it is obvious that this is a quality piece of engineering which has been carefully thought through. Sustainable and recyclable packaging and I love the way all the fixings are packaged and labelled separately - it oozes good design. The instructions were easy to follow and installation was very straightforward. This was being used to hold a 24 inch TV which was easy to hang by fixing the top 2 screws into the back of the TV which then drop into the bracket rather than relying of fiddly balancing whilst trying to match up the holes to the bracket.

Looks compact. sturdy and strong. Little squeaky. Only problem i had with it is that its not smooth. When you move around horizontal left and right it tightens until you untighten it with alan kwy.

I’ve bought three of these and can highly recommend them.The arms move easily yet the monitor is very securely held. They feel like a professional product. The cable tidy loops are also useful for preventing messy wiring.They’re fairly easy to install. I’ve only fixed them to masonry walls, so can’t comment on drywall fixings, but they are very well-anchored to masonry using the included fixings. The only thing to note is that I found it impossible to get enough torque to tighten the screws using the included Allen key adaptor. A proper ratchet did the job easily enough.One more tip: make sure your monitor is vesa compatible! I almost bought one that wasn’t before I realised.