Anchor Hocking Heritage Hill Glass Drink Dispenser, 2 Gallon

**UPDATE: 1 month into it and the spigot leaks a lot, mainly at the base. I've decided to get stainless steel after all - just need to carefully pick a good one and inspect it before installation (they tend to have metal debris and stains even before first use)**It's exactly what I wanted size wise, glass lid instead of metal lid (which tend to rust), wide mouth so it's easy to pour water into it daily as we distill water at home, acrylic spigot instead of stainless steel (which, again sometimes rust). Not one flaw in the glass so it looks perfect on the counter. It came well packaged with the spigot already installed. I only needed to tighten it and done! Pours fast too. Highly recommend.

I had bought this before 2 years ago and it held up pretty good until a crack formed along the bottom and it began to leak. So now I have ordered a second one and when I opened it up there is a big round sticker stuck to the bottom that I cannot get off so now if I peel that off I'm going to have to soak it and scrub it to get all the glue off I have no clue why they would do this it is a nice jar to hold my excess water in I did replace the spigot because the one on it leaks and I bought stainless steel one to put on but now I don't like having to do what I have to do it's ridiculous

05/04/22Was finally contacted by customer support. I told them the condition of second unit and they apologized for condition. They said the only thing they could do is try one more time.I received the 2 gallon dispenser today and in direct sunlight could not find any obvious flaws. My mom said it looks so much clearer than any other and she is 90.It is a beautiful glass work. Worthy of:"MADE IN USA".04/15/22I wrote review after a few days of use. Found defects in glass and contacted Oneida & Anchor Hocking. From Sept 2021 to Jan 14 or so tried to get a response and was eMailed they would send a replacement Jan 16, 2022, but I would have to wait 8 to 10 weeks. Never did receive anything after 80 or so days. Started eMails again. No response. Couple weeks latter an Anchor Hocking package was outside. No notice, tracking, nothing.Opened package and replacement had really bad defects, much worse than first.eMailed photos and have never received a response.The original has never leaked in 6 months. My main concern are flaws like this in glass will usually break. Water after all is about 8.33lbs per gallon, or around 20.825lbs with 2.5 gallons it holds.Original review followsNeeded water dispenser to replace good but dated 45+ year old ceramic water dispenser. Mom seen the Anchor Hocking Heritage Hill Dispenser and that was it.Spout is inches from the countertop and requires stand, unless you set on edge which usually ends in knock off accident.Paired with X-cosrack Wood Plant Stand, and X-Chef stainless steel spigot, replacement for plastic spout.__________________________________Anchor Hocking Heritage Hill DispenserItem model number 93339L14 $29.998.84lbs 8.75 x 8.75 x 13.5 inchesX-cosrack Wood Plant Stand $15.99Stand Exactly As Advertised.Wanted sleek but minimalistic looking stand for water container.Easy to install, with included Allen wrench, not Phillips head, thank goodness. Phillips would never sink screw into bamboo wood without stripping head.Lite weight, but very strong, rated at 175lb capacity, and with an 8.84lb dispenser and ~2.5 gallon capacity at 8.34lbs per gallon x 2.5 = 20.85 + 8.84 = 29.69 lbs of glass and water.Visit the X-Chef Store $16.99X-Chef 2 PCS Stainless Steel Replacement Spigot for Glass Jar & Drink Dispenser.I believe the X-Chef quality is second to none, of the $15 to $20 spigots, and that is 2 for less than average price of one. Installed 2nd on ancient Ceramic dispenser, looks really good and old plastic spigot is gone from it as well.Total $62.97, but remember that is 2 spigots.Tried to write this to help a novice or person looking for good quality products at a descent price, that to me, look really good together. Check out photos.

I'm fully satisfied with the container itself, wide, sturdy, attractive.1 of the 2 I ordered shattered horribly in shipment, which I assume is not the fault of the manufacturer (though apparently the seller didn't have control over shipment either?) but is a frustration in that I now need to find a source for a 2nd, which I still plan to do, so that speaks to my satisfaction with the intact item.The spigot is crap. It's the same terrible, chrome-painted plastic spigot that every one of these beverage dispensers seems to use, regardless of manufacturer and design. I don't understand why. The chrome paint is cheap and will peel off over the plastic over time (potentially into your beverage, pfeh) and doesn't even look attractive. I guess 'silver' is supposed to add classiness to the look of the product? If you don't want to use food grade stainless steel, which I understand might be a cost concern, fine, but then just use plain undyed unpainted plastic, the cheap chrome paint is not fooling anyone, and if it is, that's even worse. One star off for needless cheap parts.Note to kombucha-brewers looking for a continous brew container, be aware, the container is great, but the acidic kombucha will absolutely peel the chrome paint, you'll want to replace the spigot for sure. Also while kombucha likes oxygen, leaving a head of a few inches in the container and opening the lid once in a while to refill should be more than enough air access for a healthy mother.I replaced my spigot with a Tomlinson Lever Faucet which is functional and looks just fine, even without the chrome.

It is great for what I needed and is so cute and big! It holds up to 2 big bottles of detergent.I will say it does pour slow but it might just be because the thick consistency of the detergent!!