OEMTOOLS 25036 Bleed-O-Matic One-Man Brake Bleeder Kit, Featuring An Opaque Brake Bleed Bottle / Transparent Hoses and Tapered Fittings, No Mess Brake Fluid Bleeding , Multi color(Packaging May Vary)

I bought this kit hoping one of the two adapters would fit on my power steering reservoir and one did. I recently replaced the power steering pump, high pressure hose and the steering rack on my 2016 GMC Acadia and the new pump was noisy after multiple attempts to bleed the system by turning the wheel from lock to lock. I bought this kit since I already had a hand vacuum pump (pump is NOT included with this kit) and figured I would try it. It definitely helped as the pump is quieter but not dead silent like it should be. There is a good chance the pump I got is defective and should probably be warrantied out. If that is the case this kit will be needed again.As far as using it to bleed and/or flush the brake fluid, you get three different attachments with the kit so it should cover most bleeder screws on calipers. I could see this working well to remove a stubborn air bubble trapped in a caliper but for a full on flush and bleed, the two person method or pressure bleeding from the master cylinder will work better. Gravity bleeding is also an option if you aren’t in a hurry.Nice little container, plenty of clear hose and an extra o-ring seal is included for the cap on the container. The power steering reservoir adapters are worth the $20 for this kit alone.

Easy to use, works great in my minibike

As a professional mechanic I needed a way to better bleed the air from a power steering system on a Chevrolet Traverse. I saw this and for the price I thought I would give it a try. The tool function like it was supposed to and I did get a large majority of the air from the power steering system. My only complaint is with the adapters. I feel rubber of the adapters should be a little softer which would give a more air tight and secure seal. Better yet if the adapters were like the design of some coolant bleeders with an expandable adapter that once tightened would be secure and free from leaks. Again the tool is decent and I will use it again since I own it.

Unfortunately the 2 plugs provided do not fit a Toyota Camry power steering reservoir. So, I decided to use a hack saw to cut off 2/3 of the smaller plug and it worked. For the price, and a small modification it was worth it. I wouldn't recommend it to someone not willing to take a chance and modify it because if you scratch it to deep while cutting it, you won't get a good seal.

This one man bleeder worked just as it should. Do not believe the bad reviews. I bled my 2012 Nissan Frontier calipers that I had just replaced and had no problems. The kit arrived fast and all I needed to do was trim the 45 degree angles to a 90 degree on both ends of the clear hose. Push the correct green nozzle INTO your bleeder valve after you backed it off a few turns. Be sure to attach the clear drain bottle with magnet +6” above the caliper and leave the cover off of your master cylinder until finished. Start pumping the brake pedal, 2-3 times, check the clear hose and watch all the air bubbles going UP the clear hose to the drain bottle, pump the brake pedal 2-3 mores, top off master cylinder as needed. Continue until the clear hose has no bubbles, tighten bleeder valve, remove equipment, top off brake fluid to MAX, call it a day. Best $8 ever spent.

The plastic cup that comes with the adapter kit had a broken rim and is completely useless. Also, the adapters will not work for power steering pumps that have caps with two flanges for tightening the cap, like GM vehicles. I needed it for a 2005 avalanche and the adapters will not work. The two flanges on the cap fit through two notches in the lip of the opening of the power steering pump and those two notches prevent the adapters from sealing.

No complaints from me. I specifically bought this kit to bleed the power steering system on my 4th Gen RAM 3500 after repairs. It's difficult to get the air out any other way with the hydrobooster, and the single Mopar bleeding adapter is more than double the cost of this set. The narrow cone fit the reservoir perfectly and I was able to easy maintain a vacuum to specification. Totally worth it to me. As for the complaint about the blow-molded case not holding the ported lid for the cup, that's true but is fixed simply by taking a flat file to the end of the ports. One stroke of the file to each port to remove a little material was all it took to snap into the case. Where this kit really shined is when I used it to bleed the hydrogears on my zero-turn mower after changing the filters and fluid!

Bueno, pero muy pequeño