Rollerhouse1.25" (32mm) Powered Electric Shade Motor, Blinds Tubular Motor Compatible with Roller Blind with 1-1/4" Diameter(Separate Motor Only)

I have had these for over a year now. Though I had to contact support several time they were fantastic and responsive. They resolved my initial issues with a battery that would not charge and answer all my questions.I would have given 5 stars but the rollers are louder than we like.

I purchased one of these motors to test out as possible solution for several roller shades in our home. I have Rollease brand shades with light filtering fabric. I measured my existing interior shade tube at 35mm with a smooth interior. My shade was 70" wide and 84" tall (my largest shade). The motor is plenty strong to raise and lower the shade and is quiet - quieter than I expected - speed is good, not too fast and not too slow. The only modification I needed to make for my mount was to grind/cut down the mount bracket flat tab that inserts into the motor. If you don't have a way to do that, you could probably find and purchase a replacement bracket since the end is standard slotted - you just need to find the right size. It does have a couple different slots for different sizes, mine was too big.Installation was easy, take down shade which is a flip tab and lift out for mine and then pry out the old chain end clutch and slide insert the motor and rehang shade. Exact shade height doesn't matter as you are rehanging as you will set the top and bottom when setting the remote limits. The motor came with two additional grommets for slightly smaller/large tubes. I swapped to one of the other grommets that was a hair smaller that fit better for my shade. I removed a little retainer clip, swapped ends and reinstalled the clip - it might be a little tricky as the clip is small, a small regular screwdriver worked for me.I paired the remote prior to rehanging since it was easier to press the pair button when on the ground rather than when hanging up. I also charged the motor prior to starting installation so I was starting with a fresh full charge.Setting the top, bottom, and mid limit was very easy - you just need a paperclip to press the small set button on the remote. My complete install with remote programming and bracket modification was less than 30 mins and my next ones will be even quicker now that I have done it once. Depending on your specific shade, it could be plug and play for you or you might need some basic DIY skills. If it weren't for the bracket on mine, I probably could have done the install with no tools or maybe just a screwdriver.My original shipment didn't come with the remote as pictured but the seller was super responsive and shipped one out right away. They have also followed up several times to check in and make sure everything was ok - top notch customer service!Overall a great product and great seller. Worth the money spent and I will be purchasing several more based on this experience. Once I have everything setup, I won't have to pull shade chains on all my blinds twice a day, I can't wait!

I have upgraded my existing 6 living room blinds with Rollerhouse rechargeable motors. It worked like a charm, with a little customization (once inserted, the motor makes the blind assembly almost a quarter inch wider). In the end I was able to make up the difference.There was a problem with the delivery but the seller worked hard to resolve the issue.I am very pleased with the DIY upgrade. It would have cost me a couple of thousands more to do it commercially.

If want it to connect to Alexa need to get the “Broadlink RM4 pro” otherwise works with included remote as expected.

I ordered 8 of the 32mm and 2 of the 50mm motors to retrofit my Bali solar shades. I ordered the motors in small batches. One of the orders was lost in transit but Amazon allowed me to easily cancel and reorder it. I opted to reuse my brackets which required a significant amount of cutting/drilling shaping to adapt the legacy manual drive components to work with the motors. For those who aren't handy with shop tools, I would consider buying the Rollerhouse brackets made for their motors instead. The 32mm motors came equipped with drive and idler collars that fit nicely within the tubes used in the roller shades. Unfortunately, the 50mm drive and idler collars did not fit with the 50mm Bali shade. The ID of the aluminum tubes used in my shades have a number of ribs and other "features" that may be specific to the solar shade manufacturer's super expensive motors. Rollerhouse is building up it's inventory of adapters but may not have the one that fits your shade. However, I was able to easily cut out a slot in the 50mm plastic drive and idler collar that they supplied to make it work for my roller shade. If you don't mind making mods with a handsaw and box cutter, then you will have no problem doing it yourself. I purchased the 15 channel controller to control my shades. I also have Broadlink RM4 so I can control my shades using a cell phone app. The Rollerhouse customer service is super responsive and helpful.