Muzata 10Pack 6.6FT/2M Excellent Spotless LED Channel with Thicker Milky White Cover No Hot Spots Sliver Deeper LED Strip Diffuser Channel U108 WW 2M

So fun! We installed these lights around the perimeter of our living room and use our Alexa to control them. I love being able to adjust the brightness and colors.

The media could not be loaded. Happy w the results. I wish I could order a clear defuse tho

Its a great product. The mount clips sold separately are over priced. But if ur willing to drill straight through the thin aluminum channel that extra cost can be avoided. Screw down your miter box. Measure twice cut once. Use a full size hand hack saw. Not a mini hack saw and definitely not electric. Good Luck!

Product arrived well packaged and undamaged.Some people complained about sharp edges. The sharp edges of the relatively soft aluminum can easily be 'softened' with sandpaper or a file.I like the longer 2 meter length of these channels (compared to other channels) to minimize the number of joints.My Waveform brand 10mm wide LED strips fit well inside of these channels and, combined with the diffuser, I get a nice light distribution with no 'spots' / 'dots' that can sometimes be seen with other LED lighting set-ups.The standard 10mm LED strip 'clip connectors' are too wide for the channel; the installer can either solder connections, locate the 'clip connector' outside of the channel, or notch the channel so that connector can extend beyond the width of the channel.I purchased the extension clips sold separately -- these extension clips appeared to be of better quality than the clips included with the extrusions. I also purchased #6X1-1/4" long flat head wood screws from a big box hardware store -- I would never install these channels with the screws that were provided in this kit. Kit is pricy but overall looks good and performs well and I was able to make it work well for my application. Despite some needed product improvements I intend to purchase again.I'm curious about safety of product as the extrusions are designed to be held in-place with these spring clips and tiny screws -- It would be unfortunate if the extrusion was used to mount overhead LED strip lighting and and the assembly fell and damaged the lighting system and/or hurt people below.

These worked out better than I thought. The clips worked well, but I ended up drilling holes and fastening them to my structure. The clips helped align the two pieces together. Diffusion worked well with the depth and the shape of the diffuser.

work very well.

The media could not be loaded. The Muzata spotless diffuser channels, combined with the Muzata 96 LED's per meter make for a perfect neon effect. I purchased and installed these in my son's bedroom for my first project using WLED on an ESP32 board and powered the LED's using an old PC power supply. 52 feet total length or about 1522 total pixels.

I had high hopes for this product but unfortunately the quality is just lacking. The mounting hardware is incredibly flimsy and half of the mounting hardware was bent and damaged upon arrival. Beyond that, the fitment of the actual diffuser inside the aluminum extrusion fits very loosely and tends to want to fall out. I will have to use glue or some other method to keep the diffuser strip from falling out on some of the channels.Something positive I can say is that the aluminum extrusion itself is very sturdy for how lightweight and small it is. If you end up purchasing these, do not waste time fiddling with the mounting hardware. It will work much better if you drill through the inside of the aluminum extrusion and screw directly to whatever you are mounting to. This looks better and works much better than using the included mounting hardware. As far as cutting to length, I used a miter saw with a standard carbide tipped blade feeding very slowly so that the blade didn’t grab and destroy the channel. Always use safety gear and use good safe shop practices when cutting.