ALITOVE WS2815 Individually Addressable LED Strip Dual Signal 12V 4pin RGB LED Strip Lights Outdoor 150 Pixels 16.4ft Waterproof IP67, Replacement for WS2812B WS2811 SK6812 (No Power & Controller)

Q: What voltage should the data and clock lines use for these 12 volt strips?

Hi friend,our ALITOVE 5m WS2813 LED Strip working voltage and max current is 12V 6A. Here is wiring guidance. Red wire: 12V+ / Black Wire: GDN / Yellow wire: Data / Green wire: Backup Data And plz ignore the clock port.

Q: can I connect two of these in series for total length of 32.8 ft? Does it have a connector on both ends?

Yes you can. Both ends come with connector and additional power wire for power injection. Plz test each roll with 12V power first before installing,and after connect 2rolls together,don't forget to inject power at both ends. Red wire: 12V+ / Black Wire: GND / Yellow wire: Backup Data / Green wire: Data / →: Data transmission direction ---Make sure LED strip 12V+ / GND / Data connect correspondingly to the controller port,otherwise,the strip won't run smoothly. Red wire to controller's VCC port, Green wire to controller's Data port, Yellow wire and Black wire to controller's GND port. Or ignore the Yellow wire,just use Red wire,Green wire,Black wire to controller's VCC,Data,GND port. And plz set RGB,WS2811 for WS2815 strip.

Q: What type of remote I need for WS 2815?

To let our 16.4ft WS2815 300LEDs Strip work,you can use our 12V 8A Power Supply and below controllers. Our ALITOVE WS2815 led strip is 4pin wire,it should comes with additional 4pin connector while most controllers comes with 3pin connector for WS2812B led strip. Just connect the additional 4pin connector to the 3pin controller and then connect to led strip's 4pin connector is ok. Red wire: 12V+ / Black Wire: GND / Yellow wire: Backup Data / Green wire: Data / →: Data transmission direction ---Make sure LED strip 12V+ / GND / Data connect correspondingly to the controller port,otherwise,the strip won't run smoothly. Red wire to controller VCC port, Green wire to controller Data port, Yellow wire and Black wire to controller GND port. Or ignore the Yellow wire,just use Red wire,Green wire,Black wire to controller VCC,Data,GND port. And plz set RGB,WS2811 for WS2815 strip on APP. 12V 8A Power Supply --- https://www.amazon.com/dp/B07G5BQGYD?ref=myi_title_dp SP105E Bluetooth Controller --- https://www.amazon.com/dp/B01LW1J10W SP107E Bluetooth Music Controller --- https://www.amazon.com/dp/B07H15ZC8D SP108E SP108E WiFi Controller --- https://www.amazon.com/dp/B07DDB6JHJ SP110E Bluetooth App Controller --- https://www.amazon.com/dp/B07G77YD9L SP601E Bluetooth Dream Color LED Controller --- https://www.amazon.com/dp/B089Q4TW3J?ref=myi_title_dp

Q: Are the connectors waterproof and are the controllers waterproof?

No,just zthe led strip with silicone tubing,the connector of the strip isn't waterproof.

产品编号: 95521945

安全交易

细节

Color
Black FPCB
Brand
ALITOVE
Indoor/Outdoor Usage
Outdoor
Special Feature
Dimmable
Light Source Type
LED
Power Source
DC

🎨Individually addressable pixels for custom colors

🔄Dual-signal wires ensure uninterrupted flow

🔋12V power for zero voltage drop

描述

✨ Light up your world with unstoppable brilliance! 🔥

INFINITE CUSTOMIZATION - Control each pixel’s color and brightness independently with 24-bit color and 256 brightness levels for stunning animations.
PLUG PLAY SIMPLICITY - 4-pin JST-SM connectors and waterproof IP67 silicone casing make installation and maintenance effortless, indoors or out.
SEAMLESS COMPATIBILITY - Works flawlessly with popular controllers and apps like K1000C, T1000S, SP105E, and sound-activated SP107E for ultimate creative control.
POWER WITHOUT COMPROMISE - 12V design eliminates voltage drop, powering all 150 pixels at full brightness without frequent power injections.
UNBREAKABLE SIGNAL CHAIN - Dual data wires guarantee continuous lighting even if one LED fails—flawless performance you can trust.

The ALITOVE WS2815 LED strip is a 16.4ft, 150-pixel, 12V RGB LED strip featuring dual-signal wires for uninterrupted lighting, individually addressable pixels for full color and brightness control, and a waterproof IP67 silicone cover. Designed for outdoor use, it supports popular controllers and offers easy installation with 4-pin JST-SM connectors, making it the ultimate upgrade for vibrant, reliable, and customizable lighting.

规格

Color	Black FPCB
Brand	ALITOVE
Indoor/Outdoor Usage	Outdoor
Special Feature	Dimmable
Light Source Type	LED
Power Source	DC
Light Color	Full Color
Theme	Decoration , Lighting , Party , Holiday
Occasion	Party , Holiday , Show
Style	Classic
Material	Plastic
Controller Type	app
Number of Light Sources	300
Voltage	12 Volts
Wattage	36 watts
Included Components	Female 4PIN JST connector, 5x silicone clips, 10x mini screws
Item Weight	1.6 ounces
Number of Items	1
Item dimensions L x W x H	196.85 x 4.72 x 1.57 inches
Control Method	App
Water Resistance Level	Waterproof
Manufacturer	ALITOVE
Part Number	AL2815BK150WP
Product Dimensions	196.85 x 4.72 x 1.57 inches
Item model number	AL2815BK150WP
Is Discontinued By Manufacturer	No
Assembled Height	4 centimeters
Assembled Length	500 centimeters
Assembled Width	12 centimeters
Shape	Linear
Maximum Compatible Wattage	36 Watts
Special Features	Dimmable
Shade Material	Plastic
Light Direction	Adjustable
Plug Format	4 Pin JST SM connector
Batteries Included?	No
Batteries Required?	No