Husky Liners — Front & Rear Mud Guards | Fits 2019-2024 Ram 1500 (New Body Style) w/OEM Fender Flares (Will NOT fit Models w/Out OEM Flares, Black, 4 Pc | 58136

Look great after installed. I've use Husky's Mud guards on a few vehicles I've owned though the years and they do hold up to the real world of driving and I'd buy again if I needed more. Only thing is the back screw you need to install, don't trust the 3M tape, really, it's useless. One thing I did was use one of the existing nutted headed screws you remove for install of the flaps to use later on the inside back edge of the flap behind the tire. and installed 1 of the philips head screw supplied with the flaps on the outer edge and use the nutted screw on the far back edge of the flap to hold it tight to the liner securing the flap in place. Do not count on the 3M tape to hold the far back edge of the flap. What I did was slipped the screw bracket onto the wheel liner and drilled my hole next to it from the back side of the liner, pretty easy to do and saves having to remove the tire. And I slide the bracket over the drill hole and used a #8mm socket on a 1/4" ratchet and tightened the nutted screw through the bracket because of the tire being in the way. It's secured and no noise rattling from there, just a tight fit to the liner so you won't have any problems down the road. I'll include some pix of what I wrote and tools I used. That's the hardest thing to do and you don't have to take the tires off to install the flaps. They look great on my new Ram 1500 Limited Elite 4X4. And the flaps fit as they should, nice and tight, won't come off easy at all. The first flap should take about 15-20 minutes and them the rest go pretty fast. It took me about an hour + but I cleaned everything good before applying the supplied clear tape that's goes on the edge of the flare, so the flaps plastic doesn't rub the paint off or whatever. Enjoy!

Easy install and fits great. 2019 Ram Limited

Good flaps--a skosh wider than the truck. The front flaps fit perfectly. The back flaps--the holes match up perfectly, but on the rear flare, there is a piece on the wheel flar that fits differently. Once installed, it is hard to tell that the rear flaps were not meant for a 2025--there is a very small fitment issue on the plastic, but honestly, in looking at the truck from the rear, it looks as it should. Would I buy them again and install? Absolutely. All four fit (mostly) a 2025 Ram Rebel with wheel flares. Great product.

These would have been a 5 star, maybe even a 6! The use of the tape is a joke. The tape is hanging out in the air, nothing to stick to! The clear tape to protect your paint is even more of a JOKE. You cannot get it separated. Not impressed this is the major down fall of the Husky flaps. I ordered the Weathertech first at $100.00 more than the Husky thinking I'll get the best possible. WRONG! I had to send back, the contour was correct, but the screw holes where nowhere close. I was not going to re-drill every hole. These Husky's screw holes were spot on. They are installed on a 2022 Ram 1500 4x4 with flared fenders. Easy to install minus the tape. Packaging is a bit to be desired, they could secure so all 4 are not rubbing each other. Overall, I'm very happy with the look, fit, and quality. Update - 6 months later - Not really happy with how they look after a bit of use. Color is fading fast. See picture.

Got these for my 2023 Ram 1500 Limited and they look great and fit perfectly. a $100 savings over the cost of weather**** ones. The tape piece is kinda useless on the mud flap. I didn't try to use the paint protector stickers, either. I do highly recommend installing the 1 extra screw that you will have to drill into the plastic wheel well liner to secure the inside of each mudflap. Took less than an hour to do all 4!

Very nice Husky makes a great product. I installed these on our Ram and they fit and look great.

Installed on my 2020 Ram 1500 Laramie. Look and feel way better than the stock ones in my opinion and way cheaper. I bought them because my tire shine kept getting all over the truck and haven’t had that issues since I put them on. Really easy to install. My only complaint is they use the factory screws which is nice but the back part towards the middle of the truck uses this sticky tape that sucks. It comes with bolt and nuts if you don’t want to use the sticky tape and I would highly recommend that. The only problem is you have to take the wheels off in order to drill a tiny hole in the wheel well plastic. But if you do that they are super solid and fit perfectly on the truck.

Most of the install went very easy, except the the paint protectors on the rear. There are two protectors on each strip that are supposed to easily tear away, like the front ones did. The rear ones would not separate properly. I called customer service, and they told me to cut them with a box cutter - not a very good option since they are not straight. The rear ones will work, but they are not the prettiest after my attempt to correct Husky's error. Other than that, I do like them and would have given them a five-star rating.