SpigenTempered Glass Screen Protector [GlasTR EZ FIT] Designed for Galaxy Tab S10 FE/Galaxy Tab S9 / Galaxy Tab S9 FE [9H Hardness/Case-Friendly]

I loved my DOTTO tablet protector case and it’s an upgraded design from a version I bought for an older Samsung Tablet. My DOTTO tablet protective case was very durable and functional. I would highly recommend purchasing this larger protective case to help protect the 12.4 inch tablet’s glass located all along the entire front of my Samsung Tablet S9+. The DOTTO Case was easy to install successfully on the very first attempt. Due to the great construction and design, the case provides 2 ways to ensure that the Samsung Pen stays with the tablet if you use the Tablet Case’s special made slot holder located on the inside frame of the case. This special holder ensures the pen stays in the specially designed holder when the screen case is closed. It also has an elastic covering on the back of the tablet which holds the tablet pen in place on the tablet to charge it and an elastic band that slides over the case cover making sure the cover remains closed and the tablet pen remains securely in place. When I used this case with its three different securing features for my tablet’s pen, I don’t worry continually about losing the pen since the tablet only has a magnet to keep it on the back of the tablet and the pen is easily knocked away from the magnetic area if bumped or brushed while it is being used or being stored away.I liked how this case felt holding it using just one hand or being able to watch a movie almost completely hands free when I use the case to hold the tablet for me in a landscape viewing position.In addition to a tablet protector case like this one, I have generally always used Spigen tempered glass screen protectors on my tablets and cellphones to prevent any portion of my electronic device’s glass coverings from being chipped, cracked, deeply nicked, lightly or deeply scratched due to accidentally dropping the tablet or dropping something sharps or sharp and heavy onto it. A tablet glass surface protector made from a 9H rated tempered glass is an important tool which I have always used to prevent glass damage to any of my tablets or cellphone purchases. My Spigen glass screen protector may have cracked or broken due to accidentally dropping it or dropping something on the glass protector. However, my Spigen glass screen protectors have always successfully prevented the glass installed on my devices from ever being damaged. Instead of the device glass being broken or damaged, the glass screen protectors I always ensured were installed prior to using the electronic devices. Whenever I saw possible damage, the Spigen glass screen protector may have cracked, chipped or been scratched. However, my tablets and cellphones never had any damage to the device’s installed glass areas appear underneath the glass protector or elsewhere due to how well the Spigen screen protector worked. No damage could be seen underneath the screen protector after it had been removed to install a new replacement screen protector. Screen protectors have saved me a great amount of money due to not needing to replace my device’s screen whenever it was dropped or had something have or sharp dropped on top of it.If you are considering a screen protector for a tablet or cellphone, I also highly recommend purchasing a Spigen GLASTR EZ FIT glass screen protector to protect the tablet glass from easily cracking. The EZ FIT is easy to install and has a high 9H surface hardness rating which is the most desirable surface hardness rating level for protection from cracks, scratches and smudges. It has an oleophobic coating that most definitely helps with fingerprint and fingerprint smudge removal. The screen protector comes with an alignment tray which tremendously helps to easily and correctly install this very, very large glass screen protector. Without the glass cleaner, alignment installation tray, dust catching stickers, squeegee, installation video and well written instructions with detailed pictures and the microfiber cleaning cloth, whole installation process would have been difficult to complete successfully in one try

So far so good Sreen protected and easy to assemble.

Got this for my Tab S9 Ultra (which the item description states it is for specifically)I pulled up the instruction video online.Right away, I notice the Glastr EZ FIT video is showing a glass screen protector application plastic sheet that has a circle-hole at the top and a slot-hole on the bottom.Curious, since the application tray I have has two slot shaped plastic keys, one end a bit wider than the other...Oh well, I thought, prob changed a bit in production since they made the video.I clean my screen (after removing the screen protector I originally put on the device [more on that later])Then I go to apply the new screen protector..Only... The top and bottom holes do not line up ?!?!?!?If I have it placed in the bottom slot, the top slot-hole in the plastic is not lined up to allow the plastic slot piece in the tray to click in and have the screen protector lined up properly.So, just like when I put on the first screen protector of another brand, I needed to try my best to have it not covering one of the two camera lenses and fit as best in the middle as possible by hand jiggling.In the end there ended up being a couple dust particles stuck between the protector and the screen in visibly annoying to have places and just like in my first attempt with another screen protector where I eyeballed the placement, once I put the tablet in a case, the protector was enough out of center that one corner of it is getting pushed up and won't stay flat leaving a permanent air bubble while in the case.This was the whole point of getting this one with the mounting plastic guide to place the protector in the best correct position.But with the plastic having the holes cut in incorrect positions, the guide tray was worthless.I flipped the plastic every way like trying to get a non usb-c usb connector in the right direction and still no way the guide holes lined up properlyI bought a WSKEN protector for my S24U that had the guide tray thing and it worked 100% perfectly.I was hoping and believing this one would as well.May as well have tossed $25 in the trash.I may end up seeing if Amazon will refund my money, but its not worth gathering all the discarded material left after using the product (well.. trying to use it)Update 2/12/24:Spigen customer support Sent me a replacement kit (which is a plus. Will check hole alignment to see if any difference before moving any further and contact support again if seems same as before and get instruction..Will update review if better result(I can say I appreciate their support service)

Out of all the products I have used in the past 10 years - this is by far the easiest set up! Professional grade set up - even for first time users!I did watch a video a few times before applying - just to make sure, as I was putting this on an 11 inch tablet and didn't want any mistakes. I was a bit nervous. But after watching the video a few times, I'm thinking...this is a piece of cake! And my application is flawless! I am very excited to see absolutely no flaws or bubbles. Just take your time and know.. this is super easy.I did line up the screen protector (with backing still on) in order to make sure that it lined up and didn't go over my camera lens. With the hole and one side and the slit on the other of the thing that holds the screen protector, it was easy to know how to line it up. Once I had double checked that, then I started the process of cleaning, drying and removing dust particles, and placing the screen protector on. I did notice once I had the screen protector on and had done an initial pushing the bubbles out, when I took the tablet out of the frame, it was easier to get the last of the bubbles out. And now there are zero imperfections! Couldn't be happier!