Nordstrand Copper Wire Stripping Machine - Electric Cable Insulation Stripper with Blade - Manual Tool for Recycling Wire Scrap from 19 AWG to 6/0 AWG

A great tool and very easy to use. I did not expect much from this because of the low price, but was surprised at how well it works. It takes a little time to set up, but overall it's faster than manual cleaning. I recomend

Overall a good product. A few issues - the clamp base is not suitable for a thick top bench or table. There are holes provided and, by removing the clamp part, I used those to screw the stripper to the bench. That worked well. The second issue is that the adjustable guide wheels, for sizing the wire width and keeping the blade centered, are secured with wing nuts. I'm sure that the thought was to make quick changes easier but the wings on the wing nuts actually interfere with the wire being pulled through. Allen head screw would have been a better, more secure method. I was stripping heavy gauge #6 copper wire and this stripper performed well. We pulled a few hundred feet of wire and it did fine. The extra cutting blade is a nice touch.

Very difficult to set up for 12 gage wire and thinner. Slight variations in wire thickness causes the device to fail. It beats a razor knife but not by much and not for the price. The video makes it look easy when it is anything but. Also the base is not wide enough for thick tables. You will have to drill and bolt directly to the workbench.

works quite well, tho there is a learning curve to adjust properly. once you have it set right, will strip wire pretty quickly. comes with two blades. be careful to adjust so it just cuts the insulation and not bites into the wire as that will dull blade quicker. swings out for easy loading of the wire, or reloading if it runs off track. when the side wheels are adjusted right, usually keeps in the middle of the wire. i have stripped no. 14 to no. 4 easily. it is work but you end up with beautiful shiny copper!. i just screwed it to my kitchen counter. lots of fun!

This a great investment for stripping wire, I'm an electrician and always have a lot of scrap left over from some installs.. it's easy to figure out and set up and once you get the hang of it you can really increase the value of your wire.. works on every wire size.. excellent product and it's well built

very difficult to set up for 12 gage wire and thinner. once set it works well. slight wire thickness variations cause process failure. beats a razor knife but not by much. the videos sure made it look easy but not so much in real life.

Great little wire stripper. Easy to mount and works well. I used this on a big pile (~100) of power cords and other cables that I had lying around. The rollers make it very fast to strip long wires. Just make sure you sort the wires by size to minimize the number of times it needs to be adjusted.

I was really disappointing with the Nordstrand Copper Wire Stripping Machine. It is very hard to adjust and easily slips out of adjustment. I had hoped to save time and strip wire in a safer manner than using a utility knife, but this is just too difficult to use. I'd just as soon go back to stripping with a utility knife.