描述
- BRANDED MANUFACTURE: YOSUN 100% new replacement TV lamp bulb with same functioning as your original one. Perfectly match and compatible for your TV.
- FEATURES: It is the lamp with housing, not only a bare bulb. Same as bright and durable lamp wick as the original bulb. Outputting high definition pictures as you expected. With outstanding DLP imaging technique.
- COMPATIBLE MODULES: Applicable for SONY KDS-50A2000 KDS-50A2020 KDS-50A3000 KDS-55A2000 KDS-55A2020 KDS-55A3000 KDS-60A2000 KDS-60A2020 KDS-60A3000 KDS 50A2000 KDS 50A2020 KDS 50A3000 KDS 55A2000 KDS 55A2020 KDS 55A3000 KDS 60A2000 KDS 60A2020 KDS 60A3000 TV Replacement Lamp
- INSTALLATION AND SAFTY: You will find it is quite easy to install it into your TV as the ways you are taking out your old lamp. Be aware of the connector make sure it connected well. It is not electric, shut down your TV when you install it.
- WARRANTY AND RETURN: New replaced lamp will be shipped to you when your bulb was out of work naturally in 180 days. Refundable issue, please contacts our 24 hours/7 days customer service. It is our appreciations if you need any further assistance.
Parameter: YOSUN new replacement TV bulb with housing. Perfect match is only applicable to your correct TV model. Lamp Life: 3000-4000 hours Warm Noted: Be sure to use an XL-5200 TV Lamp for replacement. If you use lamps other than the XL-5200, the unit may cause malfunction. Be sure to turn off the unit and unplug the power cord before replacing the lamp The lamp remains hot after the unit is turned off with the TV. If you touch the lamp, you may burn your fingers. When you replace the lamp Wait for at least 0.5 hour for the lamp to cool. Do not touch the surface of the lamp If you touch it, wipe off the fingerprints with a soft cloth Installation: 1. Turn off the TV and unplug the AC power cord. 2. Loosen the screw on the lamp cover with a screwdriver, and then open the lamp cover. 3. Loosen the 2 screws on the lamp with the screwdriver. Hold up the handle, then pull the lamp straight out. 4. Hold the handle of the new lamp and push it in securely until it reaches the end, and then tighten the 2 screws. 5. Close the lamp cover, and then tighten the screws 6. Plug in the AC power cord.
