MENSI Piezo igniter with Spark Ignition Electrode 200 Degree Resistance Wire 1 Meter Long Set of 2

Ordered to eliminate the need of lighting the pilot light on a gas oven with a match. Works great.

It was time for me to replace my old one so I bought this one. It was easy to unpackage easy to install and worked on the first click. 💯 Suggest this product.

It arrived fast in minimal packaging. The price was good and it seems to work as advertised.

As you can see it can be installed on in Coleman Classic 2 burner stove. What was done:- I drilled four holes in the steel panel to accommodate 2 sparking plugs. I used 6/32 pan head screw and nut to secure spark plugs next to the burners- I sharpened ends of both sparking plugs using small bench grinder- I cut the cable that goes to left burner to length of about 1 foot and crimped new connector on it. Then I put termo shrinking tube on it and shrunk it with gas lighter. Then connected to central connector of the igniter- Connected long wire that goes to right burner plug to side (flat) connector of the igniter- With both burners unscrewed and removed, end of sparking plugs were bent towards burners so make a spark gap of about 1/8" or little bit more. You might need to adjust the spark gap so you can remove and install burners, and the spark is bright and powerful on both burners at the same time. I used two pliers to bent the ends of the spark plugs to make sure ceramic part is not damaged by the force applied to the plug end.After several adjustments the igniter works as it should on both burners. The only thing I did not like is a loud sound it creates when the button is pressed, but I can live with it.

I can't complain about the price. I bought these for a little science project. They work, albeit VERY inconsistently. Sometimes they spark on the fist push, and other times it takes 20 tries to get a spark. 3 stars because: Price = 5 stars! Sparks consistently = 1 star. Average = 3 stars

Installed them they worked about four clicks, and then stopped working

The item came on time. I used this to replace a broken lighter on a RV fridge. It was mounted separately. I ran a ground and lighting wire. Works great. No more going outside to light the pilot.

Device works as ir should, but ease of installation is site specific. If where you want to put it was similarly equipped previously, a piece of cake. Non-similar site will require a bit of engineering adaptation.

Fonctionne très bien, a voir si le pyrex tient dans le temps

Una schifezza è esploso alla seconda volta che l'ho usato

Top eingebaut und schon geht alles wunderbar.

works instantly

Lo emplee para encender una plancha asadora de tres fuegos a butano...Funciona perfectamente...solo que el color rojo del botón,se va gastando..