PLA 3D Printer Filament 1.75mm,Mirror Chrome,Chameleon Rainbow,V60,Net Weight 1kg Accuracy +/-0.05mm

The colors are nice and the PLA prints just fine. Each color on the spool is at least a couple meters long before it gradually changes to the next color. If you are printing something small it will very likely be one solid color.

Only about 20 rolls into the hobbie, but this rainbow filament has been great to print with. Color comes in a nice gradient, got no clogs or tangles, went down nice from the first layer on. Make sure you print a temp tower first and go from there.

Normally, this is good filament. I have used many rolls for my business and had 3 printers running 24/7 for 4 weeks during Christmas without any failures. This filament made us a lot of money retailing toys. I got some toy orders last week and needed to order rainbow filament. I went to order my go-to Stronghero Rainbow PLA. Loaded up 3 printers to print my orders and chaos. Some prints were spaghetti, other would print a few layers then separate and others would just stop extruding.I spent 2 days rebuilding extruders but didn't seem to make any difference. Finally, I selected a much smaller part than what I had been trying to print and used a remnant roll from previous prints. The pictures are from the same printer.Picture 1 was using the recently purchased filament. Ultimately, the filament had jammed and was not extruding. While retracting the filament, it jammed and broke in the feed system on my K1 and I had to disassemble the feed system to remove the filament piece. Note the manufacturing code 24JAN016003.Picture 2 was using the remnant roll on the same printer immediately after the print in Picture 1. No change in settings, just used a build plate from another machine and selected the file and printed. Note the manufacturing code 26AUG010003.Picture 3 was immediately before these prints because the extruder was jammed and would not load filament. Notice the nice blob of filament jammed in the filament path. I also cleaned each of the gear wheels to remove residual plastic.To summarize: This is a bad batch of filament and have a return in process. This manufacturing code is dimensionaly unstable at a minimum.I will try to order the Stronghero filament again (different mfg code only) and hope this is just 1 batch. I will gladly give this 4 or 5 stars if the quality returns to where it has been before. I really want to like it again.

I have been a fan of Stronghero3D for a while now from the PETG side of things as they have colors and finishes that no one else seems to have. I decided to give this filament a try as I really liked the look of CookieCAD's Witchcraft PLA, and this seemed pretty close. I don't know if Stronghero3D was trying to mimic the other filament or not, but for me it was hard not to draw a comparison because they look so similar to each other right up to the point where you compare prints side by side.I have to say this filament prints really well, and I think I like it slightly better than the Witchcraft PLA. in the samples pic I included you have this filament printed at 220c on the left, printed at 230c in the middle, and Witchcraft PLA printed at 220c on the right. I think the 230c of this filament turned out more iridescent than the Witchcraft PLA, so I will be staying with this filament.I have had a lot of fun printing various things out of this filament and will be getting another roll when this one runs out. I hope Stronghero 3D keeps coming up with fun new colors and styles.

This filament is beautiful! The items printed with this, once we got it going right, look fantastic. However, we had a lot of failed prints at first because this filament did not want to stick to print bed at all! We had to play around with the settings a lot and waste a bunch along the way getting things to work with it. It also has caused a couple of nozzle clogs, again resulting in a print fail half way through. I recommend this for the amazing color and shine, but be cautions of clogged and be prepared for a few test prints to get your temps and settings right.

This filament printed well and glows decently afterwards. It was very worth the price and worked well. I was not ready for it to be as abrasive as it is, which I later read is common to most glow-in-the-dark filaments. It deformed a brass 0.04 nozzle to the point where it was extruding sidways within the first third fo the roll. I swapped the brass out for a 0.06 stainless steel nozzle and, after adjusting for the temp/size, it continued to print nicely.The roll remained useable in a very humid environment with no drying for about two weeks, which I though was pretty decent.

I recently tried the Stronghero3D PLA 3D Printer Filament in the Vertigo Galaxy Rainbow color, and while it didn't quite meet my expectations, I still got decent results.One thing that I appreciated about the filament is the unique color, which has a subtle gradient effect. However, the color didn't quite have the iridescent or rainbow effect that I was hoping for. Instead, it looked more like a blue and purple gradient.The filament fed smoothly into my printer and didn't cause any jamming or clogging issues. I didn't notice any smudging or blurring of details in my prints. However, I did notice that the filament had a tendency to string and ooze, which required some post-processing cleanup.Overall, I would recommend the Stronghero3D PLA 3D Printer Filament in the Vertigo Galaxy Rainbow color to those who are looking for a unique gradient color for their prints. While the color wasn't quite as iridescent or rainbow-like as expected, the filament still produced decent results. I would give this product a 3.5-star rating - it's not perfect, but it's a decent filament to consider.

The filament printed ok. The brim pealed away easier than some other filaments and seemed a little more fragile than most brims but the end products turned out good.

Bonne couleur, parfait

El filamento esta muy bien, pero la entrega del paquete bastante malo, me lo entregaron dañado

Real nice color filament, good quality, good adhesion. Bed temp 60 nozzle temp 210 on kobra 3.

Wunderschöne Ergebnisse mit diesem Filament! Gut zu verarbeiten, top Qualität! Klare Kaufempfehlung