KC602 AC/DC Clamp Meter

Handy when the battery fails in my main meter - seems absolutely fine and accurate. Like it.

I have mostly Fluke multi-meters, my oldest and the one I still use most is over 35 years old and still works perfectly. Before I retired I could justify £350 plus for each of these and they have paid for themselves many times over. But now when I needed an amp-clamp to check the integrity of glow plug circuits on my motor-home I had the choice of another new Fluke, to get a auto electrician in, or to buy this meter. Two of these options were very expensive one was not. Guess which one I chose. The manufacturing quality of this meter is not great but the cost was so low that had it only lasted one job it would have been worth it, although I do not as rule advocate buying to throw away. Actually I have used it a lot, partly because its small size makes it easy to get the amp clamp in small spaces. It is nowhere near as substantial as a Fluke but its not a twentieth of the price. So there has to be compromises somewhere. The plastic is quite flimsy and I assume the electronic components are probably not grade 1. As someone who regularly used to drop his meters off buildings and into running engines I don't believe it would stand up to heavy usage simply because its not armoured in the same way. And again because of the thinner plastics I would be wary of using it on higher amperage's,. But so far not only has it worked but it has worked well. So if you do not need a professional grade instrument that actually requires significant investment then I have no reason not to recommend this item.

Good price for a basic Clamp meter perfect for home use.

🧪 First Look Picked this up for site checks and van-side diagnostics—wanted something that handles AC/DC current, voltage, and continuity without dragging out a full bench setup. Straight out the box, it’s lightweight but feels solid. The clamp opens wide enough for chunky cables, and the LCD backlight is crisp even in low light. Auto-ranging works well—no fiddling with manual settings. Tested it on 12V van circuits, mains sockets, and a few battery packs. Readings were fast and consistent. The NCV (non-contact voltage) feature is handy for quick live checks—no need to probe. 🧰 Real-World Use ✅ Used for fault tracing, continuity checks, and voltage reads—no drama ✅ Clamp handles thick cables—tested on 10mm² and up ✅ Backlit screen easy to read in dim corners or under dashboards ✅ Temperature probe included—tested it on a heater core, worked fine ✅ Duty cycle and frequency modes useful for deeper diagnostics Also tested the resistance and diode modes—clean results, no bounce. Battery life’s solid, and the auto-off feature saves juice. Comes with a pouch, leads, and probe—ready to roll out of the box. 👍 Pros ✅ 600A AC/DC clamp—covers most site and van needs ✅ 6000 count display—precise readings ✅ Auto-range—no manual faff ✅ NCV detection—quick live wire check ✅ Backlit LCD—clear in low light ✅ Includes temp probe, leads, and carry pouch 👎 Cons ❌ Clamp doesn’t measure DC current—AC only via clamp ❌ No true RMS—watch for accuracy on variable loads ❌ Plastic feels light—fine for daily use, but not ultra rugged ❌ No magnetic strap or stand—needs flat surface or hand hold 🧭 Final Verdict If you want a clamp meter that’s accurate, compact, and built for real-world diagnostics, the HT206D earns its spot. I’ve tested it across van electrics, site gear, and home circuits—no drama, just clean readings and proper features. Good stash-ready kit for anyone who wants their testing sorted without the faff.

Very good value and works a dream

Very impressed, really like the auto range setting, compact, easy to use and accurate read out, the extra light function is perfect for locating wire in a dark control panel. Highly recommend and great value.

I have not fully tested this on my Petrol Car yet but the Starter Motor peak current is my main requirement for this device. Everything so far is excellent. The NCV probe is excellent, it easily detects if Mains Power is connected to a cable and is Live or Switched off. The Temperature shows Fahrenheit on the upper area and when the Thermal Sensor is connected and switched on the Lower area shows Centigrade. With no Sensor plugged in the upper area reads the background Temperature in Fahrenheit. The current accuracy in the downloaded PDF file from their Web Site shows DC & AC current as + or - 2.5% (+ or - 5 digits) and Multimeter as expected much more accurate as 0.5 % DC (+ or - 5 digits) and 0.8% AC (+ or - 5 digits) For most DIY task this is all you really need. If you are into Electronics, a separate Multimeter would give higher accuracy, but normally high accuracy is not important. Test Leads are very good quality, reading approx 0.2 ohms when shorted together on ohms range. A good quality product for £54 appropriately delivered. Model: KC602

Well it measures, looks the part and works. Only down side is the constant re-setting to zero, a bit worrying on the correct readings and how precise they are?

Stämmer i mätvärden på spänning o ström mätning. Bra pris.

Excellent product Excellent service arrived in 2 days of purchase

Ottima pinza amperometrica, di piccole dimensioni, facile da usare. In automatico è leggermente piu lenta. Le misurazioni sono precise e affidabili.

納期早い（中国からの輸入モノは、このご時世の影響か、中国通関通れず届かなかった）。梱包もきれい。日本語がある取説もうれしい。ループ式での直流電流計測は、ゼロリセットができて、10mAの桁でばらつき、誤差ありますが、100mA の桁で判断すれば問題を感じません。本来、非接触直流電流計測機能だけでも私には価値があります。付属の熱電対で温度も℃で計れます。液晶のバックライトとループ部を照らすライトは超便利。その他機能は、これからですが。今後の耐久性に期待しています。

Very nice and handy little multimeter! It seems to measure very accurately. Unfortunately, I missed that some cheaper clamp meters do not measure DC Amps. Only AC Amps. But both DC and AC volts. Otherwise very satisfied with it.