H4/9003/HB2 LED Bulbs, 22000LM Ultra Brightness 6000K Cool White, 1:1 Halogen Size, Plug and Play, Canbus Ready, IP68 Waterproof, Pack of 2

I must have installed about a dozen LED bulbs in cars and motorcycles over the past few years. They are pretty easy provided you have decent access to the bulb from under the hood. Many can only be installed one way around, so the first time I installed these H13 bulbs I didn't double check, I installed them so that the clip which attaches to them was on the same side as it was with the old halogen bulbs. THIS WAS WRONG! On initial install the high beams were next to useless because I had the bulbs installed upside down! On pulling them out to examine what was going on I realized that these LED's are even stamped with an arrow to show you which side should be up! (I missed this the first time around). MAKE SURE YOU INSTALL THESE THE RIGHT WAY UP!The bulbs themselves throw a pretty even beam pattern with little or no dark spots. The fan design means that they should fit in pretty well any car that takes an H13 without needing more space than a regular halogen H13 bulb (this can be important for many cars). I am happy with the light output, I've got some marginally brighter LED bulbs in other cars and motorcycles but you don't want so bright (or imperfectly aimed headlights) that may blind other drivers.I can't comment on longevity as I have only just installed.

I bought them for my 05 ford focus they fit perfectly in the headlights. Appearance is perfect all the covers and everything was able to go back together still 100% factory. Absolutely will be buying these for my truck as well. As For performance they are super bright at night they absolutely clear white lights. Great price for the how bright and easy they are to install. I will 100% recommend them to anybody that is thinking about changing over to led head lights.

I've used other Fahren products in the past with pretty good luck. These LED headlight bulbs are easy to install and are very bright. I put these in a 2004 Toyota Tundra AC, with OEM headlight housings the beam pattern is diffused and distorted as they're meant to reflect halogen bulb light, so if you want to use LED lights I suggest aftermarket housings, not even necessarily projectors. The beam pattern on low is great and lights up the road and signage nicely without blinding and annoying oncoming traffic. The high beam on the otherhand seems to do more harm than good, the light seems to point up off of the roadway, leaving a darker spot where you need the light the most, though this works good on dark desolate stretches of road, especially when on the lookout for wildlife.

I installed these H4 bulbs in an old car that had zero clearance for heatsinks or fans and the H4 connector had to be in the same location as the original halogen bulbs because a sheet metal bulkhead is right behind it.I had previous very positive experience with a LED replacement for some 9003 bulbs inside my other car's projector style headlamps. I was hoping for good beam pattern, greater brightness, and was hoping for reduced current draw.The beam pattern from these is good but not outstanding. This pattern is a function of both the bulb and the lamp's reflector and lens, so I'm not faulting these alone for the beam pattern. My other car with factory halogen projector-style beams that were fitted with LEDs is better, and my wife's car with factory LED headlamps is the best.These are substantially brighter than the halogen bulbs. I suppose I could measure it with a light meter, but side-by-side, its blatantly obvious. This isn't one of those things were you're just tricked by a higher color temperature and a blown-out pattern. This is nothing like those expensive "Super-Star" halogen bulbs they sold for years that were barely brighter, cost twice as much and lasted less than half as long.Since I mentioned those premium halogen bulbs that were sold as upgrades for a long time, I'll also mention HID conversions. I bought one for the car with projector beams. The LEDs were better and much easier to fit. I returned the HID's at some expense to me.I was going to measure the current draw on these, but I can read that they've been designed to draw the same current as OEM bulbs to avoid triggering alerts on cars so equipped. My car is old enough not to detect such things. So I don't expect to get any less current draw with these, which would have reduced battery drain when the alternator is not running. I suppose if those amps are going into LEDs to make light, I'm getting something out of it.

I was impressed with these bulbs bc of how bright they are and also bc of how easy they are to install. I worried that I would need extra connectors and wires to use LED bulbs in my 2000 towncar. I didn’t have to with these. My headlight housing is becoming evermore cloudy and yellow whic has an effect on the color of my previous halogen headlights. You can’t even tell those things exist when these lights are on. Would buy again and would recommend to family and friends.

Am extremely happy with this incredible product.Super even and bright.

Ordered for a 2016 Toyota Tundra. Fit right in. The bulbs are a lot brighter than the halogens that were in the headlights (not sure if they are 800% brighter as advertised but maybe twice or 3 times than the halogens). Unfortunately one of the bulbs burned out after 6 months. So I was no were near the advertised 60,000 hours. Can hear the fans running but that did not bother me. Not sure if they are worth $70 if they last 6 months.

Very easy to plug in the bulbs. Will see how long they last hoping for a long time!!

I had a different well known brand in my car and like most led headlights it had an external heatsink & fan, the problem is the heatsink was nestled right into the rubber boot and it sealed of the vent holes so they would overheat. These headlights completely solved the problem, boot fits perfectly and doesn't block the airflow because it uses the air inside the headlight housing, and they're brighter!

Installed Fahren Termitor 2024 Upgraded H4/9003/HB2 LED Headlight Bulb today and tested extensivelyFan noise is not loud even if it says 20000 rpm and brightness is very goodI hope it keeps the performance over long time, if not I'll lower the rating later

It works, swaps like an oem bulb, easy. How long it’s gonna last?, who knows, just gonna buy another one.Definitely better than old oem halogen bulb.

Purchased these bulbs after great reviews through the Car Light Reviews channel on Youtube. Since these don't have an external driver, they fit the vehicle a lot better. I'm a little more worried about heat and therefore longevity with this design, but the decent warranty helps with that.

No problems with the ‘06 Tacoma dust boots.