Loctite 319 Rear View Mirror Bonder 0.5ml

Worked really well, but you really do need to follow the instructions. It goes off really quickly once you put the adhesive onto the mesh. If you take too long getting it onto the windscreen, or if you try to move it once you stick it onto the glass, it will not work. So, you have a matter of a few seconds to put the adhesive onto the metal, place the mesh onto the adhesive, and position the base onto windscreen. Once in place, do not move, or the adhesive will not work. And remember, this only works for bare metal to bare glass. And really you need to separate the mirror from the base, if you're trying to hold the entire mirror assembly in place you will almost certainly fail.

Absolute utter rubbish do not waste your time or money, really really is a poor product..having built many many cars over the last 40 years this stuff is beyond rubbish.......

Yes it works , followed the instructions and no problems , on my daughters BMW , the interior mirror fell off with the button still in it , after some careful wrestling with some grips I managed to release the button , So after carefully working out where to put the button I marked the screen with some tape and bonded the button in place as per instructions , I waited 30 minuets twice as long as instructed . The real test was after connecting the wiring back I had to quarter turn the mirror onto the button , this took some force and quite clearly the bond held and the mirror clicked into position , Amazon driver apparently was unable to gain access to my house , the ring doorbell suggests differently so I had to pay extra to get a prime same day delivery , had to happen when it really is urgent , 1st one still not arrived but I will keep it anyway if it does arrive.

First time was a fail! Followed instructions, cleaned windscreen thoroughly with scraper blade and alcohol as well as silicon remover, applied as directed, left it for 60 minutes and it popped right off when I exerted the slightest pressure on the mirror bracket. Second time was a success! I used some glass etching cream to prep the glass and tried the remains of the glue and activator pad. This time it worked and the mirror bracket is solidly attached to the windscreen, for the time being at least. Loctite ought to upgrade their kit to include some glass etching cream and expand their instructions accordingly.

Does exactly as it should. Refitted my large Motorhome rearview mirror and all seems sturdy so far. Keep an eye out for any run of the adhesive onto the screen and clear up before it sets - could do with that being mentioned on the instructions, but doesn’t affect my score. Clearly time will tell, but so far so good!

Follow the instructions and it sticks like you know what to a blanket! I left it to cure for 3 hours before hanging a heavy reversing monitor on the windscreen button. Expected it to have dropped off overnight but still stuck fast.

This didnt stick at all, didnt even go tacky. Maybe faulty batch

Wasn’t very successful

Tiene una banda rugosa para colocar entre el cristal y el retrovisor, lo puse colocando en ambas caras el pegamento, lo dejé presionado varios minutos y se quedó perfecto. No se ha vuelto a caer el retrovisor, pese a que no tenía la pieza metálica que traen algunos como guía. Muy efectivo si se usa correctamente y se limpia la superficie del cristal antes. Las instrucciones van en inglés y no son muy claras, hay que usar la lógica..........el español ya supera en número de usuarios a los ingleses, sería un detalle del fabricante..............

Fixed the problem perfect, very easy to do

Despues de una semana de aplicar el producto y dejarlo fijado con cinta y en el garaje sin usar el coche al quitarle la cinta veo que no esta pegado. Creo que puede ser por varios motivos el primero porque el espejo tiene un caparazon en la base que sirve para tapar el sensor de luces y lluvia y segundo porque la zona donde se aplica el pegamento es una chapa de la base pero esa chapa coincide en el cristal con una zona sombreada como en gris y que el pegamento ay no agarre incluso que no se termine de secar. Asique no lo recomiendo para espejos modernos o con peso aunque puede que en los antiguos que son mas simples pueda funcionar

Lo compré porque se despegó el retrovisor interior de mi coche. Trae una pequeña malla cuadrada que hay que recortar para adaptarla al tamaño que necesites y detrás del envase vienen las instrucciones sobre dónde y cómo poner el pegamento y cuánto tiempo esperar. Ya han pasado unos 2 meses desde que lo utilicé y el espejo sigue bien fijado, así que lo recomiendo.

Lo compré para pegar el retrovisor interior del coche y un par de semanas después sigue en su sitio. Una reparación sencilla que te puede ahorrar un buen dinero en el taller.