🚀 Elevate Your 3D Printing Game!
The ELEGOO ABS-Like 3D Printer Resin is a high-performance photopolymer resin designed for LCD printing. With fast curing times, low viscosity, and exceptional precision, this 1000G white resin is perfect for creating detailed models with minimal shrinkage. Compatible with a wide range of DLP/LCD printers, it also features vibrant color display and multiple safety packaging for secure transport.
| Manufacturer | ELEGOO |
| Brand | ELEGOO |
| Colour | White |
| Material | Resin |
| Number of Items | 1 |
| Size | White |
| Manufacturer Part Number | US-DP-3D-019 |
| Manufacturer | ELEGOO |
| Country of Origin | USA |
P**N
Excellent resin, very beginner-friendly
This stuff is really quite incredible, especially for the price. Very easy to print, great detail retention, cures quickly and is remarkably tough. It really does feel like ABS plastic. I will say I hope they bring the V2 version out in white, because being able to print this in different colours via dye would make this the perfect resin IMO.
K**R
Less brittle than normal resin, but more difficult to print and the white discolours
Makes models that are far less likely to get damaged if dropped or hit. Quite good for making gears and other parts of a working structures, though as expected not as good as the far more expensive structural resins. A good compromise between durability and cost.BUT - be aware that it is a tad more difficult to print with. I first printed several exposure test plates, but found that it really needs about 30% - 40% more exposure time than the best test exposure, otherwise there are too many failures caused by weak layer-bonding. With my printer the best exposure test plate was 3 seconds, but to stop too many failures I had to increase to 4 seconds (0.05mm layers). You need to find a compromise between loss of fine detail caused by over-exposure and too little layer bonding which results in a failure between layers at some point in the print, and half the print staying on the FEP. Using a new FEP helps - a used and heavily marked FEP will grab the print more stongly and is a greater risk of tearing the print apart, or of supports failing.Immediately after printing the model is still quite soft (and so can be easily re-worked at that stage with sandpaper, file or polishing compound), but it becomes much harder and stronger after post-curing. However I used the white resin, which discolours to a light yellow-brown colour in the post-curing process, so bear that in mind if you are printing anything that needs cosmetic properties.
M**
Good product at a great price and delivered quickly
This resin is great and tough. The detail is really nice and it’s not really brittle like some
M**H
Great Resin that I use frequently with my Mars Pro 2
Having had trouble getting the Egeloo Clear resin to print I have found the grey resin to be excellent.I've gone through quite a few bottles of this resin so can say I've not had any issues with it's print quality.
S**N
My go to Resin
I've tried a few resins, but this one is my favourite especially as it goes on sale quite often.I do recommend doing exposure tests as I found the eleego recommended settings to be a little off, they recommend 25 and 2.5.I found 35 and 3.5 to be perfect for me.