CHIPTRONEX NXT1 MESH Mid Tower ATX Gaming Computer case with 4x120mm Dual Ring ARGB Fan, MB Sync, Supports Micro-ATX and M-ITX Motherboard with Tempered Glass Side Panel gaming case, computer case, cabinet for pc, pc cabinet, cabinet rgb, rgb light, M-ATX M-ITX (case Without SMPS)

First of all ,I am really grateful to Amazon for delivering this product very quickly. The product reached before the designated date.I have been using this cabinet for the past two weeks now and I have to say this is the best cabinet which I have purchased under 4k. The design is flawless and the cabinet does have a premium look.Here are some pros and cons which I have experienced with this cabinet :Pros 1) The cabinet have a very premium look as well as feel.2) Great for gaming,the cooling system is great ,with three RGB fans at the front and a 120mm normal fan at the back(which I swapped it for a red led one) ,the temperature of my pc stays very cool.3) Enough room for HDD and SSD as this cabinet supports each of two ssds an HDDs4) A small compartment is also available for the psu which for me (probably even for most of you guys) is a very nice feature for the cabinet.5) The glass panel also takes away the look to a greater tier for a cabinet in this price range.Cons -Honestly,I do not have anything bad to say on this topic,the only problem I had was a little bent at the psu compartment,but that was just a minor setback and was easily repairable without any hard work !If anybody has a budget of 4k or below,then I would definitely recommend you guys to give this cabinet a thought :) ,I have uploaded some pictures of the cabinet ,do give it a look ,oh and please ignore my cable management 🤣P.S. I got an aftermarket 120mm fan for the back and an led strip light which you can clearly see on the pictures,so please don't mistake to acknowledge that you might get it with the cabinet.

Using it for months now. My model is HX1000. I build a pc with this cabinet. My configuration is Ryzen 5 3600-Processor+AORUS B450 ELITE-Motherboard+Corsair Vengeance 8GB 3000mhz(overclocked to 3200mhz) *2(16GB)-RAM+Gigabyte GTX 1660 SUPER 6GB WINDFORCE OC EDITION-Graphics Card+240GB M.2 SATA WD SSD+1TB 7200RPM SEAGATE BARRACUDA HDD+GIGABYTE P450B 450W-PSU. So, it is a quite powerful pc for gaming and editing @1080p. So, I needed a cabinet with maximum airflow to keep everything cool.Now let's start the review-1. Airflow- This cabinet offers maximum airflow because of the fully open front panel, top open panel and back too. But the downfall is its front panel for intake doesn't have any dust protective mesh or aka filter which can build dust problem after 4 to 5 months. So cleaning and maintenance is required. Thankfully it has filter on top and on the smps intake area too. So its okayish.2.Fans/Radiator- It comes with 3 ARGB(5V-DIGITAl) front fan and one normal rear fan. All fans are obviously 120mm. It also comes with a rgb control button and a header to connect it with motherboard to control it directly. But it misses the important thing and i.e, fan speed controlling. It is a fixed speed fan. As it is a fixed speed it comes with slow speed by default due to noise management. It gives descent air flow. The fan uses 15 pin sata power connector for powering rgbs on fan and fan too. its rear fan is normal black one with old 4 pin molex connector.Decent but not great. For radiator you can mount 120mm(rear/top/front), 240mm(top/front), 360mm(front).And one thing I liked in this care is cooling fan for hard drive. Actually we can install 3 fans on front which it comes with too. the down fan actually blows air under the smps shroud area where Hard drive bay its present. So nice touch.3.RGBs-See it comes with argb fans which is great in this price bracket. So nothing to complain.4.Configuration- I installed two ARGB fan(out of 3 which it comes with) in front top and bottom and normal one black fan at the middle of front for 3 intake. And installed 2 black fan on top and one argb fan(it came with) for rear exhaust.5.Design- it has many cutouts on the shroud for cable passing. Even it has separate cutout for gpu power cable which only we can found in high end case. Good amount of area for cable management.Comes With smps shroud. Lots of airflow. ARGB fans. And also tempered glass side panel. Thumb screws.Cons-1.No proper guide book.2.All screw in 2 packet just.3.No speed controlling for fan.4.No front dust filter.5.No tray mounting system for hard drive.(You have to screw down).Verdict/Conclusion - Actually very good for under 4000 INR. Definitely go for it. Uploading images within15 to 20 days.Update after using 1 year-Everything is fine but it is accumulating lots of dusts as their is no intake filters. Need to clean every 6 months.

If you are on tight budget and you need good quality airflow case then this case is for you !!! Case is very good at what price point it's come. I'll be honest, finishing is not that good. And metal quality is feel bit a cheap. But it get's your work done. It has front mesh panel which is plus point of this cabinet. It comes with 3 120mm Auto RGB fans at front and 1 120mm normal fan at rear. Has 1 usb 3.0 and 2 usb 2.0 audio jack and mic jack with power button reset button and control button for LED's of auto RGB fans on top. Control button has very cool effects for auto RGB fans. But it's come with prosperity connectors which you can not connect to your motherboard or any other controller to synchronised it with your other ARGB or RGB components. It has 2*120mm or 2*140mm fan support at top. You can put 240 mm AIO at top aor 120mm AIO at rear . And you can install upto 365mm of vga card and upto 165mm of cpu cooler. It has psu shroud with cut out at bottom for showcasing your Psu logo. At bottom it also has 2 HDD mount support and has 2 SSD support on side panel cable management space is not that much but if you use flat cables then you can do great cable management. If you want to build ARGB or RGB component build then I'll recommend to replace this fan as it's fans led effects can only control by its controller button on top or go for any other option. Other than that it is one of best option for your budget build.

Best price, single 200mm pc fan sale 3800₹ in Amazon.120mm argb 430,3pin argb, fan controller 600₹, upper capinet duster 500₹, total 5330₹ ATX capinet, all above including pc Cabinet 2397₹ after discount, we get from Amazon. If any damage they verify and return this money also. Goodpurchase, no problem.