Ep-400 Epoxy 97600 Epoxy Putty with Display, Easy Application, Plumbing, 4 oz.

This product appears to be the same or extremely similar to a known brand sold at big box stores. However, each tube is twice as large as the known brand and half the price. It works equally as well. I used a tube and a half to repair metal patio furniture legs, some of which had completely rusted out at the feet. I used wire mesh to bridge the holes and the putty as a ‘body filler’. It’s a little hard to knead (easier if warm) so I used about a 1/2” at a time. It sets pretty quickly so if you use too much at a time it becomes unworkable for large repairs. I strongly recommend wearing latex (or similar) gloves while kneading and working in to fill holes. I removed most of the rusted area and used a rust inhibitor on the exposed metal. I over filled the holes, pushing into annd through the wire mesh. When set, I sanded down to a smooth finish, primarily with an angle grinder then finish sanding with a dremel multi-tool. It sets up for sanding within 15-20 minutes with good bond and strength, but I was working outside on a very warm 80+ degree day. I then primed and painted with oil paint. The repairs extended the life of otherwise serviceable chairs. It wouldn’t hurt if the supplier provided a few pairs of gloves as a bonus with each order. Other than that time will tell if it holds up in outdoor weather related conditions. This product is so versatile, I’d recommend every homeowner / handyman have a tube in their tool kit. On a previous occasion I used the name brand product to repair a chipped spout of a tea post. The repair stood up well for years with constant use, boiling water and frequent dishwasher washing. I see no reason why this product wouldn’t work just as well.

This is great for quick, sturdy repairs. Repaired a hallowwen skeleton easily and its better than new. I always keep some around for emergency repairs.

Work well to patch an evaporator for an old refirgerator. The mix became hard as a rock and stuck to the aluminium patching a pin hole.

I just love this stuff. The value is there because all the other brands you get half as much for more money.

I used this stuff to reshape and clean up the poorly milled and routed areas in a solid guitar body. Overall, it works pretty well with wood, and the fast cure time is a big plus. Wood filler either takes too long to set up, or simply isn't strong enough. It doesn't always work perfectly, and I had to redo some spots two or three times, but it probably has more to do with using it with wood, and the shortcomings of trying to fix something organic with a grain to it. It's pretty obvious that you probably wouldn't want to use this stuff with either an acoustic instrument, nor would you want to use it on something showing the grain (with a translucent finish), but that's probably the only limitation. Any guitar body with an opaque finish is a good candidate, and you'd probably be using primers that would be either gray or white (this stuff has a grayish color). So the only reason for four stars instead of five is that it isn't perfect for wood repairs, which is what I use it for.

It didn't work for me.i carried it in my hoodie/sweat shirt pouch, pulled it out and it was hard..I tried massaging it to mix ..didnt stick

This stuff is amazing, it can fix anything!!! Have a leak around your pool light? This will fix it! It's sooo easy to use, just break off a chunk and mash it up like playdough and it's ready to go. I will say this, don't put it on anything if you every want it to come off. It adheres soo well that you'll probably need a grinder to get it off.

This epoxy holds, but only with a LOT of work. The directions were clear but the tube was very hard and extremely difficult to knead. After mixing as best I could, it covered a much smaller area than I planned.

Açıklamalarda olduğu gibi son derece şağlam..

Bilen Ağar Her yerde ve koşulda kullanabilmem ve Kısa zamanda sertleşmesi benim aradığım özellikti, o da oldu. Memnunum.