Nilight Headlight Assembly 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Ram 1500 2500 3500 Pickup Quad Headlamp Assembly Replacement Black Housing Amber Corner Clear Lens,(Only for Quad Models)

Didn't realize these guys, Nilight, made so many LED items. I just realized I have bought many things from them and they have all been great. I suspect these will be too. Shipping was fast. The Box was sturday and they were very well protected. These were a carbon copy match on specifications compared to my old headlights. The hold where you aligh the bulb seemed to be not so well machined. But, I was able to use a channel lock to provide extra force around the tabs and get it to lock in. I am confident these have the tightest seal and they didn't not make a sound while turning them in with force. These seem to be made with good material. The sticker over the side marker port was the worst thing about these. It did not peel off clean and I have this obsessive need to have it completely off. I don't suspect I will see any moisture. The only other thing I would say is that the adjustment screw seems to be tilted away slightly from the access hole provided on my 4th gen RAM. However, it turns out I didn't need to adjust them I had a low output LED and it needs replaced. Take note, if your state requires amber as a side marker/turn signal, these gave clear sides. You must buy an amber bulb. These look great, super affordable, quality material. Will buy again.

I bought the wrong type of headlights for my truck- but from what I saw with these, they seem to do the job! They are easy to install (when you have the right lights) and are very sleek!

These headlight assemblies are sold as "ready to use, no adjustment needed". In my case this could not be further from the truth. The headlamps were very easy to install and mounted to the factory assembly points. To be clear these are empty headlamp assemblies, you swap over your existing High/Low and turn signal lamps. This was known prior to purchase and is not an issue. Once it was dark enough to check the headlight beams it was immediately obvious that the headlight assemblies were not "ready to use" as advertised, the beam trajectory was aimed at the ground and illuminates approximately 30' in front of the truck. The headlights come with instructions for adjustment "if required", they are advertised as "set from the factory". The adjustment of these headlights is very limited and the instructions indicate that if too much adjustment is attempted damage will occur. I was not able to achieve any acceptable level of adjustment and the headlights can only be used on High Beam in order to provide enough illumination for safe driving. I didn't give up on the headlights and after some forum research I elected to purchase higher quality LED's with the thought that these headlight assemblies would perform with better lighting. This is not the case and I will be purchasing different headlight assemblies. The factory headlight assemblies that I replaced did not have any issues related to beam trajectory, they were compromised after 11 years of use and condensate was forming inside of the housings.

These things are sweet bought to match the front ones i just replaced and didn't expect them to come with new bulbs and clips. Fit great and look great definitely would buy again

Only negative is there's no vertical adjustment. Otherwise they fit great and look good. Haven't had any moisture intrusion and with 6k 10k lumens led bulbs they're bright.

Definitely consider these headlights. I’ve been through about 4 different sets of headlights on my truck trying to find what worked and 2 out of the 4 all had moisture problems but these Nilight headlight housings were perfect I’ve used them for about 2 months now through a lot of rainy weather and are still in perfect condition. These housings paired with some nice bright white LEDs look amazing at night and gives the truck a modified look as well as the stock look since a lot of 4th gen projector headlights do not always look the best. But if you are looking for a good deal pic these up.

Look good, easy install and hookup. Look like decent quality but I've only had mine installed for 6 hours and they show moisture inside the lens.

Matched the factory one perfectly, could not distinguish which of the two was replaced afterwards. Financially a great alternative to the OEM price, and 2 years later going strong with no issues.

No compre pésimo producto

The lenses are pointed so far down that I couldn’t even see 20’ past my hood. Easy to adjust just make sure they are adjusted to the right height prior to driving at night lol Easy to install , a few screws and dodges plastic lock tab on the back

Awesome headlights. Paired with leds, you can almost see the balls on a raccoon at 100 yrds

They look great they are bright, and it took about 20 minutes to have them installed in my truck. Worth every penny.

I am impressed.. they look great in my 2011. Only thing that concerns me is the tightness of how the bulbs are in them. Time will tell..