FILM SCANNER

For the money this device provides excellent results. It's simple to set up and incredibly easy to operate in spite of the lack of a simplified US full color manual. As noted, no SD card is included but is required in order to operate the device so order one if you dont have one on hand. All images are scanned directly onto the SD card and it is not possible to view the images in real time on the PC. After scanning the image/s you can then choose PC from the device menu and open / import the files on the PC via USB. The slide feeder is a real pain in the butt if your slides are not flat and in good condition and in that case forget stacking them. I will not retract a star for this because it works as intended with good flat slides in good condition. If that becomes an issue in your case you can use the provided film tray for slides as well. I love the option to adjust the contrast in real time while scanning without having to go into the menu but I have also found that in most cases adjusting the contrast was a mistake unless the slide was very very dark. The images appear less light / clear on the device screen than the actual scan. I noticed almost no difference in image quality between the 5mp & 10mp scans so I decided to scan everything @ 5mp in case I decide to do any future editing. I am sure a few devices get through that are not quite up to par as is the case with every manufactured device but IMO this device is solid and well worth 50 bucks. I would definitely recommend this device to anyone who just wants to get their collection of home slides digitized on the cheap before they turn to dust. If you've got the money and can afford more then sure, go for bigger and better. Otherwise this will do quite nicely nicely.

Image quality is pretty good, although colors are muted compared to the actual slide (holding them up to a light to view them). Increasing the brightness exposure control leads to washed out images. I often end up scanning at normal exposure and post-processing the scans to compensate for the muted color. Doesn't handle as many slide formats as others. I bought this and it was great for my 35mm slides, but then I found some "127" slides and this digitizer can't capture that format so I had to buy a different digitizer for those. One reason I chose this model was for the slide feeder to make it easy to feed in a lot of slides one after the next, but in my case the slides always jammed. It would have been a great idea if it worked. However, the standard slide holder accepts 4 slides at a time, and that's not so bad (other models only accept one at a time).

First, I need to say that when this scanner works, it actually works pretty well. So why the 1-star review? There are several flaws with the device and its software that suggest corners were cut in the design and development, enough testing wasn’t done, or the company was trying to produce the cheapest device possible. Online reviewers have focused most of their criticism on the fact that owners have to provide their own flash memory card. But given how inexpensive these cards are, this is an inconvenience at most. The following problems are far more important. 1. The scanner has two settings, 5 megapixels (5M) and “interpolated” 10 megapixels (10M; which means, I guess, the slide is scanned twice at 5 MP and the images combined). Generally, the 10M setting works well, but if the image is too complex somehow, the device simply stops working. There’s no error message, no suggestion to reset to 5M and try again, nothing. It just stops and has to be disconnected from the computer it’s attached to. It can’t even be turned off. 2. All slides must be scanned in landscape orientation, no matter how the image was shot. So while the device has an image mirroring/rotation tool, it will not rotate a portrait-oriented image to the correct orientation. And if the user tries to rotate images while viewing them using their computer’s image viewer, they might succeed a few times, but eventually not only will the device lock up, it will lock up their computer as well, forcing them to restart or reboot. Again, there’s no error message, no warning, and nothing in the user manual to warn of this problem. The images can only be rotated to their correct orientation after saving them to another computer. 3. The device comes with three feeders: one that holds a strip of five negatives, one with slots for four slides, and one that holds a stack of roughly 20 slides. This latter one seemed like a good idea—it’s something none of the other scanners I considered had—but it doesn’t work. Slide frames vary in thickness—plastic frames are thicker than paper ones—so the feeder has to be able to accommodate all of them. As a result, paper-framed slides don’t consistently push an already-scanned slide out of the way as the user tries to move the next slide into place. It’s a good idea poorly executed. 4. I had expected I’d be able to save images directly to my computer but I can’t. Users have to save the images to the flash drive, then link the scanner to the computer and copy them, or power off the scanner, remove the card, put it in the appropriate slot on their computer, and copy them that way. While this is more of an inconvenience than a serious problem, a better design would have allowed saving the images directly to a connected computer. On the positive side, when I’ve contacted DigitNow’s tech support, they’ve been reasonably responsive, getting back to me within 24 hours, and their answers have generally been helpful. Now that I know how to work around or avoid the problems listed above, I can reliably scan a couple dozen slides in about 15 minutes, and the scan quality certainly meets my needs. It’s easy to see why the scanner made it into other online reviewers’ top-10 lists but it would have gotten even better rankings if it had been better designed and the design better executed.

For $40, this is a great scanner. Indeed as others mentioned, it is somewhat flimsy, has software limitations, and requires some renovations for smooth physical operation. Make sure you have the smaller memory card 32G (these days all we had had were larger ones) it won't work with anything larger. See attached pictures for fixes: - file off several injection mold nibs (so slides don't catch preventing them from falling into place from the stack of slides - mfg plastic nib/whiskers prevent smooth dropping into place; very easily filed) - install a diagonal rail/guide so slides don't catch on poorly designed plastic protruding corner - bend the hold-down leaf spring tabs so they do their work - as-was, they were up in the air and didn't touch the slide. - the screw threads are minimal and the receiving plastic thickness ("business end") for holding the unit together is thin. I ended up using contact cement glue on the threads to get them to hold. I guess it's not meant to be repaired. Now, all that said, it produces great scans, at a FRACTION of the price of other products. The operating modes/parameters are funky but workable. Some trial-and-error helps one find the right combination of settings. I would buy it again, and even go thru the modifications. I'm surprised that the original designer didn't test it in actual practice to discover especially the protruding corner that is in the direct path of sliding the slide into position. (if the slide is not snug to the "bottom" edge of the 2 1/8" trough "width" (slides are 2x2"), it can easily creep "upwards" toward that protrusion and not want to slide into the scanning position).

I needed a scanner but could not afford the more expensive ones on the market. This one works and delivers a lower quality picture result. The attachments to handle the slides are not easy to use. The Positive Slide Holders is difficult to open. And, the Rapid Slide Feeder does not work smoothly (it does not feed the slides easily without getting stuck or pushing multiple slides at once). The scanner unit has simple functionality: Capture slides/color negatives or b&w negatives; Exposure settings; Resolution; Language; and, switching unit to be a USB device for your PC. I bought it knowing it had limited capability (cannot scan directly to PC). The Exposure setting is very limited and sometimes stops working. Restarting the device restores the exposure feature to working. As for the exposure capability, again it is limited and not consistent. The pictures are a bit grainy, if the slide is blown up to more than a 4x6 picture. Again, was not expecting fantastic results from an inexpensive device. So, in summary, it does not rate more than average for me in quality of construction or quality of results but is OK for getting a first glance at slide photos. If you want higher quality, take the good slides you have identified with this device and take them to a vendor that can produce a higher quality enlargement. My biggest complaint about the device is that it is difficult to clean the surfaces inside the device. The device had lint and dust inside it when delivered that showed up on each scanned picture. I was EVENTUALLY able to remove most of it with compressed air, but there is still a hair or piece of lint stuck in there out of reach. In other words, you get what you pay for in this case.

The good: 1) If you don't have any other options, this works kinda okay to get an image digitized. 2) The speed loader for slides is something that I couldn't find anywhere else. I totally scavenged this one accessory to use the speed loader on another project. The not-so-good: 1) It offers either 5MP or 10MP resolution, but always comes up in the lower resolution. However, I don't think the resolving power of the internal lens is good enough to really take advantage of the 10MP resolution anyway, so maybe it doesn't matter. 2) The menus are cryptic. For example, the "capture" option allows you to select from B&W negatives, color slides or color negatives (in that order), but the options are not labeled and the icons are not intuitive. I have film in each of these formats so I could verify through trial and error which was which. 3) When scanning, to make an exposure adjustment (EV) takes several more button presses than other similar units. 4) On my copy of this unit, the built-in lens is soft, or rather has a soft spot in the middle. I'm picky about image quality and the project that I scavenged this for is using a $1000 macro lens. So the comparison probably isn't all that fair. 5) The resulting images are (too) contrasty and the color gradations are not pleasing. 6) The SD card slot doesn't have a good feel to it and I got "card errors" several times. Context: I'm a 20-years-experience professional photographer and I'm very picky about image quality. All of my modern work is digital and I'm only starting to dabble in digitizing my older film. I also have a similar but older unit made by Wolverine, which improves on all 6 of my points above. This (or any similar scanner) starts with a light source on the bottom, which projects light through the film, into a lens and then to a sensor. As with any other camera, the quality of the lens and sensor is a really important thing. For my application, I bought this unit only to get the speed loader for slides. I've built another rig including a DSLR camera and macro lens and wanted that part. It (the speed loader) works adequately (but even then has quirks that need attention). Specifically, the slides don't quite line up correctly and often "over-shoot" the scanner when using the speed loader. Since the only part that I'll actually keep and use is the speed loader accessory, it was a little bit expensive.

I bought this because my parents left thousands of slides. I have scanned roughly 2,000 so far, from the '40s to the 80's, and it's been a champ. Obviously scan quality is only as good as the quality of the slide. It takes literally seconds to start scanning, just plug it in, turn it on, and change the Capture mode to slide (it also has negative and I guess B & W, defaults to negative), and put the slide in either the slider option or the flat holding option. I do almost all with the slider. The slider part works well IF your slides are normal thickness, not bent or damaged, and has rounded corners. You can use the slider part with slides with square corners, but generally I've found it's better to only do one at a time through the slider instead of putting a stack in the holder. I do recommend always wiping the screen with the wand before you start, and doing so again if you notice a blemish on your slides. Many of the really old slides ('40s) are too thick for the slider but work well in the 4-slide-holder that comes with it. Some of the souvenir types from museum gift shops are pretty thin so you may have to do one at a time. Well worth the purchase!

I recieved the scanner the next day after placing my order... very FAST delivery! I found the setup easy, and quickly began scanning my old slides. After about 50 slides, when I pushed the capture button, the screen went black and stayed that way. I had to power cycle the unit to get back a normal screen and tried again to capture the slide, but had the same result. I then tried the next slide, but still the same result. It was getting late and I decided to stop and investigate further tomorrow. I thought perhaps I had recieved a defective unit, or maybe after scanning 50+ slides, the unit had overheated. The next day, I tried to rescan the two slides from the previous night, with the same results. However, moving along to a different slide, the unit operated normally, but trying the previous two slides, again locked the scanner up. I was baffled! I finally discovered by lowering the scan resolution from 10 to 5 solved the issue, although why this would be, I don't know. Neither of the two slides were particularly different than others, not over or under exposed. I ran into a few other slides that locked the scanner up, but lowering the resolution to 5 always worked. My only other gripe is the same that many others have commented on, which is the unreliability of the fast loader. It seems much more troublesome when loading my older, cardboard mounted slides, and works almost flawlessly with the newer plastic mounts. All in all, I think this is a good deal for a consumer-grade scanner at this price range!