RED WOLFFront View Camera Select for Jeep Wrangler JL/JLR/JLU/JT/Gladiator/Rubicon 2018-2021 Off-Road Forward Front Facing View Cargo Camera Kit Grille Metal Housing Mount, Wide Vision Waterproof

Great cam easy instal and has great video

My previous one was unuseable, as the image was whitewashed. This one has a better quality image (more contrast and better colors). Field of view is a bit more narrow. Overall, much better than my previous one. I had to make my own mount, as it did not come with a proper mount for a JT Gladiator.

I gave this 5 stars because it was exactly what I was looking for, and is a very complete kit. It’s well designed and included everything you need for a clean install, including the wiring harness that clips inline to the 12v (Cigarette) socket. Very easy install. Picture is very good considering the price, and very comparable to the factory Mopar front facing camera. It’s not as good as the HD rear camera that comes with my Jeep, but still pretty darn good, for an RCA video camera. I have only had it installed for a few weeks, so I cannot give a long term review, but seems solid. I am very happy with the purchase. If you have the Mopar 8.4” screen, this will connect with the included adapter. If you have an after market infotainment unit like mine - Stinger High10 - it will connect via the RCA video cable. Both connectors are part of the kit.

Did not work with my Jeep JLU after spending all weekend troubleshooting.Terrible instructions and not assistance provided

Compared to the rear view camera. The camera is illuminated by a bright sky and is very poorly visible.

Fit my 2021 JL with the 8.4 Uconnect. After watching the video on YouTube for the other brand front trail cam, installation was straight forward. I have the honeycomb grill and it mounted just fine no modifications needed. Pin out on the radio was also straight forward just make sure the pins are in all the way. Use the tazer to activate the cargo cam and your good to go. Or pay the dealer to flash it for you.

I have 2022 Jeep Gladiator. I would guess the camera itself is pretty universal. Physically the camera is not built for the grill on my Jeep Gladiator (it's the same grill as the 2021). They should either provide the proper mount or be VERY explicit about the difficulties and/or methods that need to be employed to properly mount the camera on a grill it's not physically designed to fit. I took a galvanized L bracket and cut it at the angle (see photo-I used a Sharpe to color it black). Installing it was pretty simple. I used some blue locktite. It's not going anywhere. There are 2 pretty simple ways (if you have the right tools) to get through the firewall in the driver's side. 1. There's a rubber cap about 1/2 .in in diameter. It has white foam type thing behind it covering plastic. I am not going use cap as I'm have no idea what that piece of plastic is there for. Close to that same cap is plastic cap about 11/2 .in in diameter. It has tabs on it can be removed, but that's a pretty large hole. You could drill through the center of it (what I decided to do), and run the wire. Then use liquid tape to seal any gap around the wire. You might be able to use silicone, but I'm not sure how well it would hold up over time in that hot environment.I'll take pictures as I finish up the install, and once I've tested it, I'll update the review.Update:I pretty much did everything I planned from my initial review (above). I have a Stinger Heigh10 installed in my Gladiator. When I installed the Heigh10, I made sure to install the camera pig tail have to pull the unit. The photos show how I ran the wires (I drilled through the grommet instead of removing it). It only took me about 1/2 hour.I took a photo of the rear view (which is HD), and this camera, which the description says it's HD. The resolution is more than adequate.I gave it 4 stars because they clearly didn't design this camera to fit a Gladiator.

Nothing special, just works. I had zero problems with anything. Mounted and wired fine on my Mojave. I would by again.