Drywall Fitting Tool, Supports The Board in Place While Installing (1 Set - 2 BoardMates)

I work alone a lot. These are like an extra pair of hands. Simple and effective. Push in place and fasten. Always correctly aligned. Takes a lot of the frustration out of hanging drywall.

Very easy to work with and works very well

I do home improvements and repairs mostly work by myself so these comes in handy when hanging drywall, supports sheets of drywall on ceiling while I start putting screws in, used to use scrap plywood for this purpose but come across these and bought them works very well highly recommend them makes hanging drywall a lot easier.

These beautiful, simple pieces of plastic are a lifesaver. This is one of the 2 most valuable tools to have when hanging drywall, especially for high, angled ceilings. The other being a heavy-duty, chain-driven board lift with the optional (but is actually not an option to not have, IMO) board-lifting attachment for loading the board onto the rack. I'm currently working on a house with 2 14'+ angled ceiling rooms with exposed wooden beams about 3-4 ft from the peak and about 6-8 ft apart. Not a lot of room for more than one person to work and I got stuck hanging both except for the first row on the bottoms which we usually do with at least 2 people just to make sure that the boards went on straight using a board lift (can be a nightmare depending on the angle of the ceiling, lift or no lift). I bought 2 sets of these (my brother/boss also bought a set) several years ago and almost forgot I had them. We couldn't easily use the lift as most of the board had be to cut into smaller than usual pieces and would have been more trouble than was necessary especially at the peak where we would have had to use the mast extension and STLL not be tall enough, they made the work so much easier because they remove the need for requiring a 2nd set of hands as long as the boards are not cut too big for more than one person to handle. I only have 2 issues with them: 1. If you screw them on too tight they can cause you to have a small gap in the seam which could cause problems later when finishing. I found that if you screw them on just enough so that they don't spin around freely while you're trying to get a board in place, they won't cause you to have any gaps. 2. It wouldn't hurt if they were made just a little thicker because sometimes they look like they're about to break when trying to support 12'x4'x1/2" or, even worse, the weight of 12'x4'x5/8" board. Yeah, it wouldn't be difficult to make some yourself since all it takes is a couple small blocks of wood, but it takes longer screws to put wood blocks up and wood can break after excessive use and longer screws suck. It would be nice if they could be made out of metal, but they would cost more. I think it would be worth it. The plastic ones paid for themselves the first time we used them and we saved a ton of energy which we would have expended faster by fighting with hanging ceiling board by hand (without the lift). P. S. Cable-driven board lifts SUCK. 😁

Seemed like a good product, I'm a drywall contractor and bought this to help on 5/8" garage drywall and had a lot of trouble with them. Didn't use them for 1/2" drywall because it's easier without this. I think if you're new to hanging drywall this product can help sustain it for you in the ceiling and take stress off your back, but all in all didn't seemed to work well for me.

Es muy bueno para no hacer tanto esfuerzo

I read some of the reviews posted and some of the negative feedback that was given. Some things I agree with like made out of aluminum but I would not trust just two on an angled wall and no way on an eight foot full sheet on a ceiling. I was by myself and since I would not have made it upstairs with a 4 x 8 sheet I cut sheets for vertical install and installed with butted tapered edges. If I could have carried full sheet upstairs I would not find it necessary to put these on a beam for the first sheet laying them vertical but the second would be fine to use them. They worked great for installing sheets on angled walls. You could also put small scrap pieces of sheet rock on the beams then screw these in to that so they would be flat on the wall. An improvement to them would be a slightly longer lip on the front part and have a small part of the front dipped/curved slightly down at an angle. Putting up an eight foot sheet by yourself the sheet bows slightly at the ends and that would make it easier to grab those things for install.

Works as should

Excellent produit, qualité prix au top très pratique facile à utiliser nécessaire pour un montage de plaque quand on est seul

Great bit of kit for helping fit plasterboard into place. It allows boards to be fitted accurately, easy to use and fit and small, so store nicely, value for money and sturdy. Recommend.

Great product. Solid and easy to use. A second set of hands to help install drywall.

Ottimo

As described