





🚦 Light Up Your Ride, Lead the Pack!
The 923-237 F150 Third Brake Light is a vehicle-specific, high-mount stop lamp designed for select Ford and Lincoln trucks (2004-2010). Engineered with durable ABS and polycarbonate materials, it offers superior impact and weather resistance. This plug-and-play brake light enhances rear visibility in poor conditions, promoting safer driving. With a perfect OEM fit, easy installation, and warranty-backed quality, it’s the smart upgrade for truck owners who demand safety and style.




| ASIN | B08NPSW57Y |
| Assembly Required | No |
| Auto Part Position | Rear |
| Automotive Fit Type | Vehicle Specific Fit |
| Best Sellers Rank | #41,079 in Automotive ( See Top 100 in Automotive ) #54 in Automotive High Mount Stop Light Assemblies |
| Brand | RANSOTO |
| Color | Red |
| Customer Reviews | 4.5 4.5 out of 5 stars (683) |
| Date First Available | November 17, 2020 |
| Exterior | Machined |
| Item Weight | 1 pounds |
| Item dimensions L x W x H | 13.58 x 2.95 x 2.76 inches |
| Item model number | RZ249 |
| Lens Color | Red |
| Lens Material | Polycarbonate |
| Manufacturer | ANODIZING |
| Manufacturer Part Number | RZ249 |
| Model | Third Brake Light |
| Product Dimensions | 13.58 x 2.95 x 2.76 inches |
| Special Feature | Dustproof, Shockproof, Waterproof |
| Special Features | Dustproof, Shockproof, Waterproof |
| Specific Uses For Product | Third Brake Lights |
| UPC | 697478906318 |
| Vehicle Service Type | Truck |
| Wattage | 5 watts |
| Year | 2004 |
D**Z
Looks great
Perfect fit and it's bright easy to install and really great price
R**T
Great deal for the price
Replaced my old faded and cracked one that came with the truck. Looks like the original. Fit perfectly and works great. Good quality part.
C**S
Fits!
Fit fine. Required some minor wiring but works great.
K**N
Takes work, but it can be done by yourself.
Light fits perfectly when finally installed. Hint: the wire harness goes through the roof, and to do the install properly, you will need to pry the passenger side rear panel pin that holds the roof panel on. Pry it off carefully and forcefully and you will be able to put it back on later. You will need to work under the roof panel to see the clip that holds the harness against the metal roof frame. The clip can be pried off without breaking and then you will be able to fit the harness connector through the back of the roof frame. Youtube does it by changing the light and using the same harness, mine was too deteriorated and fragile to do so. Save your screws as it does not come with them, otherwise it would have been a 5 rating.
L**S
Easy installation
On time and easy installation.
P**S
Cheap Garbage!
I've had this for a year since June 2023. I noticed recently one of the lights were out So I went to the auto store to get some replacement bulbs. The three bulbs, one brake light in the middle and two cargo lights one on either side. The brake light was was definitely burnt out (evidenced by the bulb) and one of the cargo lights (I thought) were burnt out. I get up in the back of the truck to remove the two phillips mounting screws holding the unit to the cab. I twisted the receptacles to remove them from the lamp assembly, and replaced them with new bulbs. This is where I noticed the bulb socket VERY LOOSELY held the bulb, so I had latex gloves on (a must so oil from your fingers will deposit on the bulb. I went to remove the bulb(s) and reseat, but the socket holders are cheap and worthless, they just don't hold the lamp well, and being this is a Ford F150 truck you do go over bumpy roads, so I could fathom where they would 'jiggle' loose out of the socket, in which I did find on the left cargo light side the buld WAS NOT burnt out, just not making good contact because the socket isn't holding it worth a darn (the light wasn't bad, just 'jiggled' loose). I decided to just live with it until I can buy a factory assembly instead of these cheap knockoffs (most likely from somewhere overseas!). I ALSO Noticed that twisting the receptable back into that lamp assembly, the middle brake light receptacle doesn't lock into place. When I ordered this back in June of 2023, they came with bulbs pre-installed, and I thought the lamp assembly would have lasted longer than this! After all, until June of 2023, the original factory lamp assembly was still working (14 years!). I only replaced it because one of the lenses had cracked, (my fault a two wheel dolly had cracked it). So, in conclusion, don't order this one, (the others are the same knockoffs), it's not worth the trouble or the 21 dollars. I guess the old adage rings true, 'You Get What You Pay For...' Now, in defense of Amazon I have ordered thoussands of dollars worht of items from Amazon. fromsecurity cameras, kitchen products, many items for the home and garage, so this is not Amazon, this is on the reseller...So, Buyer beware, maybe go down to the dealership and buy a part like this from the original manufacturer...
T**A
Read reviews
Does not fit a 2008 F150 Lariat truck. Returning. Should show pictures of the back of the light cover. It’s too small to use on my truck.
D**S
Good alternative to OEM prices
Matches the OEM part. Easy to install. Works perfectly
J**.
This is the second one ive tried. 2014 F150. Bulb sockets do not screw into holes on the back of light. Save yourself the hassle of returning it
G**E
IF ITS FRAGILE PLASTIC USE BUBBLE WRAP FFS…I’ve been having problems with my 2010 sport trac 3rd light leaking for a bit and finally ordered a new one after trying everything. Excited to finally fix my problem I open the box, take off the plastic bag around the light and pieces fall everywhere on my floor (most of which I can’t even find). The bottom right of the light is broken off and the lights completely useless to me now. You put a nice thin plastic layer on the light to prevent scratches but didn’t think about the fragile plastic corners? Lack of care shown for this product and I feel extremely screwed over.
TrustPilot
2 个月前
1 周前