POWERTEC Push Stick & Push Block, L& Magnetic Push Stick Set Fits Table Saw, Router Table, Band Saw & Jointer, Ergonomic Handles w/Max Grip, Pusher Reduces Kickback & Increases Safety. 5PK (71510)

First I was not sold on shape,being a cabinet maker over 52 years,but turned out to be an excellent tool.

Bought to replace the switch on my early 2000s Woodtek table saw after the buttons were getting stuck and hard to press. This switch looked the same and was a budget friendly option so I bought it. It didn't quite bolt up to my saw's original bracket/switch configuration. The connections were the same but I had to grind out some clearance for the switch to fit in the mount and enlarge/elongate some holes for it to bolt on. Once that was done the switch and saw worked great and had the same feel to the buttons when pressing them. I would buy it again. I don't feel like the extra trouble was too much to deduct a star for so I did give it 5 stars.

I've been living too long with just one push stick. This was a quick, low cost way to open up more options. At 9/16" wide it's thinner than what I was using so there are more possibilities. No more scanning the shop for any manner of scrap to get something done and then spend time pulling out the splinters. The grippy rubber cushion really makes a difference and seems fairly robust. Time will tell if that cushion lasts. I think it will but, even if it doesn't, this will still be usable. The handle is an inch wide with a relief for the pinky at the bottom. It's curved so its purchase presents well to the hand. The handle is not solid so there is plenty of places where dirt or sweat can escape to prevent distraction or slipping and maintain tactile feedback so there is no need to avert your eyes from your work or reposition during a process. I am pleased with the purchase as it exceeded my expectation and wouldn't hesitate to recommend it.

I have these and push sticks.Safety is essential when using a table saw.These tools are designed to get cut. They are inexpensive and replaceable, fingers are not.

Easy to install. Works great.

Perfect replacement for the on-off switch on my 1990's vintage Delta woodworking machines (after 30 years the contacts are burning out in the original switches. No modification required to make it fit. To keep the vintage look, I was even able to use the original Delta branded cover plate. Only thing different was the 2 screws to hold on the cover plate on the new switch were metric instead of imperial, but used the original cover plate screws and the replacement was done!

These work great

My table saw came with a basic push stick, but depending upon what I'm attempting to cut, other form factors of push blocks and push sticks become a necessity.I essentially bought these on spec., figuring I'd probably need one or two of them. They've all proved useful.They seem to be well-made for the price. They're light weight, but quite sturdy. I'm glad I bought them.I also bought a MicroJig Grr-Ripper Pushblock as well.