These SPL-1 Butt Terminal Wire Connectors that can be flexibly assembled into 2/3/4/6 bit or any junction as needed. Each wire connector is provided with 4 slots and 4 clasps on two sides, which can be flexibly assembled or disassembled into 2 , 3, 4, 6 bit (way) butt connectors as needed. Don't worry about buying mismatched terminal connectors. Quick Splice Wire Connectors The tradition wires connection need to strip wire, entwist copper core wires, wrap the tape. This process is too tedious and time-consuming. The biggest hidden danger is unqualified operation, which leads to the problems of quality and security in the project. BUT, Use BL wire connectors to make it quick and simple, just need to flip the little lever up and plug the stripped cables into it , put the levers back. It can be achieved great connection. It have finished all the work in 3 seconds. Specification: Wire Cross section:0.08~4.0mm?(solid), 0.08~4mm?(stranded) wire size : 28-12 AWG Rated Voltage: 250V/600V Rated Current: 32A Shell Material: flame-retardant nylon PA66 Guide Strip: Electrolytic copper (Surface tin plating) Spring: Nickel chromium alloy steel Product Size: 39(L)*8(W)*14.5(H)mm How to use the wire nuts: 1.Push the orange levers to 90¡ã. 2.Strip off the housing of wires to 0.35-0.40inch and make sure that wires are plugged into the end. 3. put the levers back. Package: 50pcs butt connectors (BL-SPL-1)
B**R
Only use for jobs you won’t worry over.
I would rather use the ((name redacted)) version because you can “see” the connection and be “sure” you have a solid connection clamped in. I also pinched my finger when closing one of these in a tight space and these really aren’t good for smaller spaces. Basically, if you’re tight on money and are using larger gauge wire, then go for it, but know that you may have a failure point because you can’t see what’s going on inside these and your wire may not be securely clamped.
B**G
Don't think I trust them
I thought these would be a real nice alternative to wire twist nuts, but I'm not sure I trust them. It is a really nice concept, but the actual design needs improvement. The locking levers operate easily, but don't put nearly enough pressure on the wires to hold them securely in place. Consequently, the wires dislodge easily when very little pressure is applied.
B**N
Good for certain applications
They work on certain applications. the wire gauge has to be right for them to really work. For some things they are great but not everything.
A**R
Some don't work. Buy another brand
First 2 out of the box, opened them but only one side would close and lock the otherside would never close even empty. Shop another brand to be safe
P**D
Nice, better than wire nuts
worked out well, nicely made