How difficult would this be to use in the threaded hole (threads stripped) of an exercise bike pedal crank arm?

I realize this question is nearly 2 years old, but thought I would share my experience.I just used it top repair a thread on an antique car door handle where the pot metal thread was broken. The thread hole was missing 1/3. I threaded a screw into the remaining portion of the threads, and used this putty to mold a repair. I did use vaseline to coat the screw threads as a release agent; it worked very well. In 2 hours I removed the screw, and sanded the part to fit, today it is back on my car, the screw threads that were repaired felt like they held tight when I screwed it down.I can't vouch for how long it will hold up; but it is worth trying the repair before shelling out big bucks for a replacement part that doesn't match the patina of the rest of my door handles.

I have screw holes in a stainless steel range hood that i want to patch. After holes are filled, will it blend to look finished, or will patch show?

Chris, I'm not sure if it will show or not, this stuff is fairly dark. I'd take a small amount, mix it as instructed and let it set up/cure per the directions. Then simply compare the cured steel stik to your range hood and see if it will match. If it doesn't match, you could always experiment with some silver paint to see if you could get it to match the stainless steel.

Can this product be used to fill in the hollow back of a ring that you wear on your finger?

I would expect that, technically, it would easily fill and adhere to the ring surface. I would just not know how constant contact with your skin would react. The cured product seems rather inert but you might want to test a small amount placed against your skin for a couple of days to be sure. I would do this before permanently adding to the structure of a ring you might want to keep. I saw another answer recommending a two part product. This epoxy product IS a two part item as it has one part on the outside ring with a central core of the second hardener. You just tear off what you need and then twist and pull the putty-like substance until blended. It will harden like steel.

Does it work with pvc?

It will but, first score the surface area of the pvc with a razor a lot. If possible put gouges facing away from the part you are connecting or opposite direction of load.

Desertcart Logo

交付 Malaysia

获得最佳体验获取应用程序

下载应用程序

我们从

阿联酋
英国
印度
美国
日本
KOREA

客户服务

关于我们

客户支持

描述

🛠️ Fix it like a pro—steel-strong, fast, and built to last!

RAPID 5 MINUTE SET - Get back to work fast with a quick-setting epoxy that cures in just 1 hour.
DIY READY CUSTOMIZABLE - Mold, sand, drill, tap, and paint your repairs for a flawless finish every time.
HEAT CHEMICAL RESISTANT - Endures temperatures up to 450°F and resists petroleum and hydraulic fluids.
INDUSTRIAL GRADE STRENGTH - 900 PSI tensile strength ensures your repairs hold under pressure.
VERSATILE METAL COMPATIBILITY - Perfect for iron, steel, copper, aluminum, brass, fiberglass, and more.

J-B Weld SteelStik is a steel-reinforced, non-rusting epoxy putty stick that sets in 5 minutes and fully cures in 1 hour. With a tensile strength of 900 PSI and resistance to heat up to 450°F, it repairs and rebuilds metal surfaces including steel, copper, and aluminum. Certified safe for potable water, it can be molded, drilled, sanded, and painted, making it the ultimate heavy-duty DIY solution for lasting metal repairs.

规格

Brand	J-B Weld
Specific Uses For Product	metal
Material	Epoxy Putty
Item Form	Putty, Stick
Special Feature	Steel-Reinforced, Non-Rusting, Can be drilled, sanded, filed, tapped, machined, ground, and painted after curing
Color	Grey
Item Package Quantity	1
Package Information	Can
Item Volume	2 Fluid Ounces
Viscosity	Thick putty
Full Cure Time	60 Minutes
Water Resistance Level	Waterproof
Tensile Strength	900 PSI
Unit Count	2.0 Ounce
UPC	079340820067 043425826756 043425021007 718767917058
Number of Pieces	1
Global Trade Identification Number	00043425826756
Manufacturer	JBWeld
Model	JBWeld 8267
Item Weight	1.8 ounces
Product Dimensions	1 x 4 x 7 inches
Item model number	8267
Is Discontinued By Manufacturer	No
Exterior	Painted
Manufacturer Part Number	8267-S
Special Features	Steel-Reinforced, Non-Rusting, Can be drilled, sanded, filed, tapped, machined, ground, and painted after curing