ELEGOO ABS-Like 3D Printer Resin, 405nm UV Curing Photopolymer Resina for Mars Saturn Jupiter MSLA DLP LCD Impresora with High Tenacity, Clear Blue 1000g

I wanted to print the dolphin and did. It is hard to get it super clear as the surface, when dry, looks hazy. I may not be getting it clean enough, but I think some work with the 3M headlight cleaning kit will do the trick. I am also going to turn off the anti aliasing feature of the slicer as that could be aggravating the problem as it may produce grey scale pixels instead of just on or off resulting in partially cured resin. The resin itself is great though, maybe a little more brittle than the pigmented ones, but very tough. Grey resin is great stuff. As you can see from the photo, it holds detail very nicely. I don't notice any smell. The clear red came out pretty nice, quite clear, nice ruby red. The flesh is a good flesh color, looks good. White was a little odd, it came out looking nice and white, but when I put it under a UV light for a final cure it turned a light tan. Maybe not clean enough, but I won't be final curing any more white.

This is some good resin. I haven't strayed far from the brand that my printer (Nova3D Elfin2) came with, but I wasn't happy with their white. As shown in the photos after curing Nova3D's white turns almost a sepia color... if you will? This ELEGOO ABS-Like Rapid Resin stays white or at least a better shade of white. I posted a photo of an octopus, it's the test file that comes with my printer, that guy has sat outside for a few weeks at this point. Still just as white as ever. In the other photo, I printed some wall mounting brackets for my Bose SoundTouch monitor speakers. On the left is the Nova3D Resin and on the right is the ElEGOO ABS-Like. This stuff is great for printing lithophanes. It's successfully printed up to .1mm layer height (for faster printing). The Bose Bracket and the Octopus are both printed at .035mm layer height. Honestly unless you're looking and not-post processing, 99% of the things I print in resin now can be printed at .1mm layer height. A layer of paint covers up almost any layer marks, plus this stuff is strong. I will have to post a question to the maker.. I'm unable to dial in the perfect first layer settings.... Everything I try this thing sticks to the build plate like it was supposed to be married to it. I end up breaking the model by trying to force it off. The only way I've come around this was just put supports on everything, even the base, but with the Nova3D Standard Resin I didn't have to do that, it comes off perfectly (with just a tad force). I have been using the clippers that come with my printer as a trick to get the model to lift up, then once it's given up a bit of the adhesion I use the spatula... anyone recommend a new way? I'm new to resin (5 months)

The product works as advertised and has low smell which is a bonus for printing indoors. I’ve been using the Gray a lot for mini printing and the detail I’m getting is amazing! But what really shines is their customer service. I initially had an issue with my first bottle shipped where a large amount of resin was missing. Nearly half the bottle! I noticed it seemed light when it arrived, but since it was my first ever bottle of resin I ignored my concerns thinking it was inexperience on my part. That was until after using the bottle when my print log (yes I log each print in grams used) didn’t add up anywhere close to 500 grams. By this point I had ordered a second bottle which was much heavier upon delivery. Something was clearly wrong. I don’t know where in the chain the resin was lost, either in manufacturing or likely by someone using some and then returning to Amazon where they just resold it, but Elegoo reaches out to me and helped make it right. Customer service like that is hard to come by and I very much appreciate what they did for me. My only suggestion to them was to add tamper proof packaging in the future so if people are trying to take advantage of Amazon’s return policy then it can help put an end to that. Right now the bottles don’t come with any sort of seal so an open “used” bottle can look identical to a “new” bottle.

First off, the gray resin in my opinion is the best at showing details on unpainted models or prints. :) The odor on this resin is extremely tame. I had worked in a paint store for 5 years and had been exposed to all kinds of industrial grade enamels, solvents, etc. This stuff isn't even as stinky as opening up a normal gallon of paint. High points there. I have it in my computer room where I prefer to reside for long hours, and have never been bothered by the odor, especially when the cover is on the printer. No smell. As for quality, I'm kind of blown away. I had printed a miniature for D&D, and didn't check the scale of the model. Base was supposed to be about the size of a quarter, but the overall height was less than a quarter's diameter. Despite the ridiculous tiny-ness of the model, details are still sharp and the stuff still holds together! He has a sword about as thin as a credit card's thickness and is still standing, even through snipping supports, swirling in the IPA bath, handling with no extreme precaution, etc. The price is extremely fair, in my opinion. You can buy approximately the same amount of material for FDM printing (1 spool) for about the same price, and FDM is known as the cheaper of the 3D printing technologies. 500g turns out to be a little less than half a liter, which has gotten me about a dozen D&D minis, as well as a 6-inch tall statue, with about a third of the bottle still left. Overall highly recommend. I will probably be buying the 1000g size next.

This is a great quality resin. It was no surprise to us that it put out an odor, but it was stronger than expected. We are new to 3d resin printing so we dont have much to compare it to, but we are happy with the ease of use and quality of prints.

Excelente claidad

ok

Excelente producto

Funciona muito bem, ótima qualidade!

Good quality resin, exhibits the properties of ABS.