YYST D Ring Patch for PVC Inflatable Boat SUP W Stainless Steel D Ring - NO Glue Included- Instruction Included

Worked great with HH-66 cement. Used 3 coats as per instructions and the 5-10 minute wait periods. Used alcohol to clean not other solvent and just fine. Once installed, ordered again for other SUP.

I'm using these on my Sea Eagle inflatable fishing boat. Can't have enough tie-down points! These are the best I've bought so far; they conform nicely to the contours and lay flat the first time. Other, more expensive ones I've used are stiffer and more difficult to get to lay down smoothly.

Worked OK, but not without issues...First, the D-Rings are stiff so they must be placed on a large flat surface (wasn't what I was planning, but made it work). The instructions say to use MEK to clean the surfaces. So plan to add $12 in just cleaner from the hardware store. The instructions for the glue did not work for my inflatable Stand Up paddleboard... PVC glue did not work even though the D-Ring is supposedly PVC. With the 3 coats, the glue was turned to goo and it did not stick. I resorted to using an "Ape" glue and it's sticking now. Fingers crossed they will last.

After sanding the back and gluing onto the Hypalon tubes on my Rhib, these fitted well and look great. They needed a little trimming around the D ring to look perfect. Great price and did the job. Holding up well.

This product is as described. "No Glue" meaning that you have to buy a separate adhesive to stick the D-rings on. It's an extra expense.

Went on as advertised

Just what you need in a patch with a hook!!

Bigger than I expected (check measurements!) but worked great on our inflatable SUP. Adhered strongly with HHH glue.