Brother ScanNCut SDX125E Electronic DIY Cutting Machine with Scanner, Make Custom Stickers, Vinyl Wall Art, Greeting Cards and More with 682 Included Patterns,Titanium/Aqua

The media could not be loaded. I'm not quite sure how I got here. I am a polymer clay, sculpting, sketching, graphic design, and beading dabbler and have never understood the draw of paper crafts, being hunched over cutting out doo-dads, or making fantastical cards that will likely just get tossed out.And then I simultaneous bought a Cricut Maker and a Brother ScanNCut SDX125EGY. And vinyl. And tools. And foil. And transfer paper, and a scanning mat. And 110 lb weight cardstock. After watching so many youtube channels in research, I came to the conclusion that you have to be super perky, with super white teeth, bright lipstick, wear too many rings, and get too excited by new color palates, stickers, and sentiments to be associated with this stuff. So how did ***I*** get here. I think it started when I googled if you could cut stencils to use ON polymer clay with one of these machines. I found absolutely no proof anyone is/was doing this, but to my shock, I found many references to people using them to cut baked thin sheets of polymer clay itself, and a few, (Gasp), saying they cut unbaked/raw polymer clay with it (why would you gum up an expensive machine like that?!)I then knew if I was serious I'd have to watch and research tutorials on the software and design process for each of them. So I felt like I was at least partially prepared to go through with this test...UNBOXING:I picked up the Cricut in person at Joann's (or as my favorite morning radio show refers to them now- J-Fab). I felt like confetti and loud music was going to fall on me, the employee was so smugly congratulatory and genuinely happy for me, like I had passed through a sacred set of rites and been inducted into a super high echelon society now. She gushed about coming in for help and classes and that I was going to love-love-love it. It was hefty in weight and a length that is a tad bulky but the sturdy box and handle made it easy. The box was pristine. I got it home and opened it up and it was well-packed but with two irksome features- everything wrapped in plastic and the mats had been curved and wrapped around and under and were totally (and still are) wildly bent.The DX125 was delivered by a forlorn Amazon delivery driver who set it carefully on my porch in a timely fashion but did not seem excited for me and was not congratulatory (based on my house cam video and images). I think after the Cricut experience I was expecting him to at least give a thumbs up and toothy grin at the camera. Alas.It was a box in a box, thankfully there was no struggle induced by the negative air pressure box-in-a-box-a-hair-bigger, so it came out nicely and was in pristine condition as well. There was less plastic and while the mat was in a slightly curved position, it pulled out and immediately went nice and flat.SET UP:The Cricut came with many separate pages/booklets/leaflets in a disgusting waste of paper that all appeared to be helpful guides and how-to-start slips but none of them really were worth existing (A single sheet entirely with a link, another 3 whole sheets with once sentence on each). The Cricut Design Space program for my Windows Lenovo IdeaCentre AIO as well as the mobile app for my Samsung Note 10.1 2014 edition and Samsung Note 10+ phone all installed seamlessly. Start up and updates were very fast and instant and I was ready to go in minutes. I was expecting to have to do the "wifi/WPS button" marathon race up and down my steps to get it to work (like it always turns into when setting up a new voice controlled plug or a printer). But I sat on my butt and everything worked and talked before my eyes. I tested it first on some decorative vinyl, card stock, the minute piece of fabric included, and the drawing pen on plain paper.The Brother set up was also easy and I was not judged by my dog during wifi set up for this one either. The built in menu is yes, limited when compared to a $1100 smart phone, but it's not laggy and is fairly easy to understand (and you can learn as you go without it freezing, changing or deleting something irreversibly, or having it shoot blades at you for your stupidity). The Canvas Workspace was also as easy to install everywhere. I tested the Brother on all the same materials.SOFTWARE COMPARISONFirst let me start by saying, I've been working on computers since I was 8 when it was a word processor with just a blinking green cursor and getting floppy disk terribly pixelated games like Snarfs and Paganitzu was believed by me and my brother to be the BEST it could ever get. I like doing everything myself, use Nova Launcher on all my phones, was satisfied with Windows XP and hated everything after, I literally cried when I had to upgrade my computer and it forced me to give up Adobe PS7 (having grown up with earlier versions and not wanting any progression beyond that one), and I despise the most popular and most dumbed-down versions of everything. So I went into this having preconceived notions of which one I'd do best with and prefer. Yes, using both so far have just solidified my preference.Cricut Design Space is very easy, very simplified, and while it won't let you do everything you may want to do, it does force you to find your way to a conclusion. The ease of access to pre-made images and fonts and ideas is spectacular. It is the laggy-ier of the two by far and there have already been multiple times it stopped responding and I had to just close out and try again (my computer has the processing power and memory (and internet connection)to probably send a NASA shuttle up so it wasn't my system being bogged down). The way this software encapsulates and isolates everything you put into it or use is expected and annoying. Even if you want to print or view something on your computer not involving the actual program, it's virtually impossible (no luck with screen shots or anything). So while the newest version allows you offline access, it all can only be worked on in the program itself. I found one work around by using my phone's S-Pen screen write function but the image size is limited. I'm not going to really get into prices, but there's a lot of costs if a majority of your work is not from scratch. UPDATE AFTER SEVERAL WEEKS: It seems to freeze and I have to close out at least once per session but the restart speed of the program is fast at least.Brother Canvas Workspace has apparently gone through significant changes recently and it's a nice program. It's a bit more limited in things you can do as far as editing, but it shines in using and making your own/external ideas. It's a real DRAG that it doesn't come with the scanning mat because anyone who uses this machine should be doing so because of this feature. I got one for $23 on amazon (not available in stores near me) and waited 5 long days (2 days of waiting after the machine actually arrived). I never have hit into lags and while the file format for creations is limiting, it's very easy to send it places and edit. There can be a slight delay in seeing projects that you've sent from one device to the machine and then want to view on another device but it does all work.ACCESSORIESIt's way easier to go bonkers with the Cricut. Partly because EVERYTHING is separate but also because Cricut stuff is available everywhere. I hadn't even gotten the Maker yet and I was monitoring prices of the foil transfer tool, the QuickSwap attachments, the Deep Blade tool, scoring tools, pens etc. I picked up the basic tools set for crazy cheap (Prime vs Premo days were cricut-acular!) This tool set is fine for no matter what cutting machine you use, they're decently well made they just look like space dental instruments designed by Apple (aesthetics get a 0 but function gets a 5/5). I got some decorative vinyl on clearance (2/3 were cricut brand). Sadly, the awesomely performing fabric cutting wheel is going to collect dust in my life since I don't work much with fabrics other than fixing my own clothes and taking things in and making my dog his bed cover (preferably ONE time thing). This tool is a deal-breaker for people that cut a lot of unbacked fabric, I've yet to find evidence that the Brother cutter can 100% hold a candle to it at this point. I also ordered an off-brand wide scraper tool here on Amazon since the one included in the kit was dinky. I bought the scoring pen, the deep cut blade, a 12x24 supergrip mat and that's it. The standard mat works well, albeit will never flatten. The lavender high grip mat is quite tacky but behaves.The Brother comes with a stylus I've still never used and a spatula thing that's mediocre. The free sheet of sparkly deep blue card stock paper was absolutely gorgeous though and worth everything in the Cricut's "to get started" envelope. The standard grip mat is absurdly sticky. I gave up after first use of ever getting some of the fuzzies, dog and human hairs and lint off of it. It also partially lifts/rips the backing of my Oracal 631 vinyl which is a major problem (I've tried every depth setting). Everything sticks to it even though I use it and immediately return it to it's plastic sleeve. After the second use it has things on it I can't get off that are causing lifts/bubbles for everything I try to put on it. My most immediate purchase was the scanning mat as mentioned above. Both mats read and feed first time every time so far. Baby wipes can help with loose lint/hair/debris after each use but more dog hair somehow floats on in the 30 seconds I allow it to dry before replacing the plastic. The low-tack mat was a god-send, it's going to be my go-to because the standard is just too tacky.PERFORMANCE:Both cut things crisply and equally well, other than the Brother insists on cutting through the vinyl AND backing on every setting. The Brother is much faster (both to initiate, design and actually do the work). They're both pretty quiet, the Brother is slightly quieter. The Brother's front tray is noticeably deeper which makes it nice when you don't have much of a workspace as far as depth because it's there to support the mat front and back.UPDATE: The winner for cutting vinyl so far is the Brother. It took some tweaking beyond just selecting HALF cut, but even after multiple test runs the Cricut Maker still cuts through everything more times than not.THOUGHTS SO FAR:They can both do the exact same plethora of things equally well with the exception of fabrics- the Cricut fabric cutting wheel is top notch. The Cricut's mats are easier to deal with. The Brother is faster and the auto blade setting is super convenient, you don't have to select all the right things it just knows and does. I had to invest more money into getting the Cricut to accomplish the same things and if you pay for monthly/yearly access, you'll always be paying something. The Brother is perfect for me and those that draw/design their own unique stuff a majority of the time and the ability to scan in ANYTHING is incomparable. I got the Maker when it was marked down to $369 from $399. I got the Brother when it was $314, from $399.The Cricut is sleek and shiny and modern and looks like something from Black Mirror's or Electric Dream's vision of the future. Anyone can use it and with the right tools, accessories, etc it can do anything.The brother resembles a printer from the 80's and 90's (do I feel almost nostalgia as a grimace?), the lighter grey body color is just a few shades off of that dingy tan they all seemed to be. It doesn't have the slow unfold of the cover or the drawer and the plastic of the draws doesn't feel as sturdy and sleek. On the inside, though, it's first class. The touch screen is an unfortunate requirement, but it responds fast and is easy to figure out. Even with the learning curve, the design time and establishing settings and inputting commands and running time were ALL faster compared to using the Cricut.I can really see why some people like one or the other, and many people have and use both. Regardless, this is going to be a fun trial period (til end of Jan 2021) to solidify the winner!UPDATE:This morning I put both machines to the test- I wanted business cards made of 100 lb card stock with my logo, my favorite font, etc. Both machines failed me to do everything start to finish.The cricut would not draw my little logo image (nothing I did and no file type allowed it to be edited to be a draw object). The Brother refused to export/transfer/keep the logo image and the periods in my text because they were all too small. So I looked to my trusty canon pixma ix6820. I made the business cards in a word document. Then I put in light outlines for each and transferred it into both canvas workspace and design space. It was very easy to just make a project on the brother that cut out the rectangle outlines nearly perfectly (I also scanned the word document in and did it that way too but my initial outline color was too light (it matched the light silver of the cardstock I was using) and it didn't pick out the only thing I needed- the outer rectangle the first time. The cricut failed in that it cut out the rectangles way off from where the card outlines actually were though I had aligned to the mat grid and the on-screen grid perfectly and did a test cut which aligned normally.Update 3/2021- the cricut is getting sold to a new home and I am very happy with the Brother. I acquired the Vinyl Auto blade kit and it works fantastically even on the sharpest and tiniest cuts. Superior to the cricut which ended up frequently snagging and clogging with some little cut out pieces. After doing more research and seeing some quilting stores test and display it's fabric cutting ability, I could presume (but without real personal evidence as I just don't cut fabric) that the Brother CAN hold a candle to the cricut.Yes the cricuts ready to make projects were handy when I wanted to do a quick not exactly personal gift for someone but I have never and will never use that feature enough to justify the costs. Also the cricut seems wasteful to me. It spreads cuts and objects out to use up more material and when you try to move objects closer together it will sometimes do it but often ignore your placement and spread them back out (and even off the grid) when you tell it to start.It took slightly more time to really get acquainted with all the tools and abilities with the brother but I retract my previous statement that it doesn't allow as much editing.I am very happy with going solo with the Brother. A small amount of supplies for it are available at places like Joanns, Amazon has the rest and I've gotten excellent deals from AllBrands website which carry EVERYTHING. Yes the Brother website itself is fairly useless for purchasing most things. I almost never use anything but the light tack mat. I am very happy with longevity and function of the blades and mats and machine itself with the Brother.

This machine is literally underrated. I literally don't understand how Cricut is more popular than this. This machine so good, quick and easy to set up, easy to start cutting and cuts great. Within 2 minutes. Take the machine anywhere and cut whenever and where ever you want. I barely had to read the instructions to set it up. The controls are very straight forward. It needs its branded mat in order to properly read your images to cut and its smart technology.My only cons about it is that I can't turn the brightness down on the screen, and its sort of a huge machine. Other than that, I'm happy and its pretty much perfect, thank you.

I upgraded from a Silhouette Cameo 5 after it had issues with drifting cuts. With 100 different fixes people recommended and none of them working to fix my issue, a large order of stickers needing to be processed, and no time to mess around, I bought the Brother Scan and Cut.Here's my experience this far:The Good1. Setup. Setup was fast and simple, instructions were clear and not having to rely on a bluetooth connection to a PC was a nice step up from my previous machine2. Scan and cut. Going from printed sticker paper to cut-out sticker has never been easier for me. Not having to make a file to send to my machine has made my quality of life in sticker making so much better.The scan and cut function has two color settings: black and white and color. For images that dont scan well on black and white, the color setting usually detects them properly.3. Accuracy. I've been using this machine for about 2 months now and I've created thousands of stickers with it. The scanning and cutting on this machine is extremely precise as far as my experience goes. I have not had a single sticker come out poorly cut due to machine errors. Any errors i've had are errors in my sticker sheet layouts. Sticker borders are always consistently cut and very clean4. Ease of use. I was able to use this machine pretty much right out of the box. Settings are very intuitive and the built-in screen allows you to see how your cut lines are affected as you change your settings. You are also able to delete cut lines that machine has scanned in for you. (An example for why this is useful could be if 5 of your 6 designs scan in properly, the 6th design cuts can be deleted, 5 good designs cut, and the 6th rescanned for a proper cut.) This has saved me so much time. I no longer need to switch between my computer and my machine and my computer again and my machine again. I can do all the work at my machine.5. AUTO-BLADE. The brother doesn't require you to tell it what material you are cutting and how thick it is, it detects the thickness itself. I can cut thin paper to thick cardstock on this thing. Seriously, I cannot stress how much work/time this machine has saved me.6. Quiet. It's very quiet, I almost don't even notice it unless I'm actively watching it.7. FAST. It's extremely fast, blink and you will miss it, truly.The Bad?1. Sticky Mats. I've never been a fan of sticky mats. They wear out too quickly, they require maintenance, and they are consumable. The brother requires you to use a sticky mat. The one thing Silhouette did right that I wish brother scan and cut had was an electrostatic mat. I never had an issues with the electrostatic mat that I have with the sticky mats, being loss of function after use. You can only revitalise the same mat so many times2. Multiple scans. If you scan pages with a surplus of images on them, chances are you will get 1 or 2 images that dont scan properly, it's just how it is. I don't think this is too big of a deal because those designs can be excluded for the first round of cuts and rescanned after.3. Stickers with words. The brother scan and cut DOES NOT group any words or letters with an image unless it is touching it. This can make certain sticker designs impossible to cut with the scan and cut feature. If there is a way to do this, I haven't found it yet. You will have to do these types of edits in the pattern function (ie make a file) which defeats the use of the scan and cut.Overall, it's easy to setup, easy to use, very accurate, very fast, very quiet, and a pleasure to own. For anyone looking to work with paper crafts, this is a must own machine!