USX MOUNTSmall TV Wall Mount Monitor Bracket | RV TV Mount | with Swivel and Tilt VESA Wall Mount for 10-26 27 32 inch LED OLED TVs and Monitors - VESA Size Up to 100x100mm and 22lb Capacity-XMS002

This wall mount works great for my tv. Finally got it put up. I love it! You can turn it left and right.

I used this to mount a 32 " LG monitor weighing 15 lbs and having a VESA 100*100 plate. Everything worked great though the small screw at the bottom of the mount to secure the two halves of the mount together was hard to reach and made even more difficult because the LG monitor had a button protruding dead center underneath the VESA plate! I also liked the fact that there was enough clearance behind the monitor to continue to use my existing HDMI and DisplayPort cables without having to buy right angle adapters.

It worked perfect.

Product quality seems fine, if your TV or computer monitor needs M4x10mm you will need to purchase those screws from a local hardware store or online.Purchasing these screws from amazon will run you another $5-7 and you will end up with lots of extras. For monitors/TVs small enough to fit this mount weight capacity they should have included four M4x10mmOther than that upon first inspection the product seems fine. Will be mounting in a few days.

Perfect mound for small monitors and medium monitors. I will be buying more.Easy and fast install.

I needed to mount the monitor for the automation server/NVR in the back room of our salon, and wanted to find the least expensive solution possible. The USX MOUNT TV Wall Mount Monitor Mount Bracket (XMS002) is a pretty basic piece of equipment, and it appeared to meet the requirement. I mounted the wall-side of the bracket into a brick wall with two screws. The monitor-side bracket attached to the monitor with included screws and washers. Two sizes of hardware are included, but no spacers are included (should you have a monitor without a flat back housing. The two halves of the mount attach with a single flange, and it's secured with a single screw at the bottom. The whole arrangement is fine, but it does help if you have a long screwdriver. For about $15 (with 10% off coupon, at the time of this review), it's hard to imagine a bracket performing this well for less money. Sure, if you need more features, like rotation or an extension arm, this is not the solution for you. Otherwise, this bracket is great for the price. Highly Recommended

Easy to install. Came with plenty of hardware. Very sturdy for the size, plenty of distance from the wall.

These mounts are extremely easy to install. The only downsides are the bottom set screw that holds the device is very tricky to reach in order to tighten. The mount does not allow space if you are using a VGA or DVI connection due to it being so close to the wall. I just purchased a DVI adapter if you will. It allows you to insert the DVI connector to the port of device and the DVI cable to the other end allowing the cable to hang down instead of out towards the wall(Bending the cable against wall behind monitor) Here is the linkDTECH DVI Adapter 90 Degree DVI-I Female to DVI-D Male Right Angle Connector Converter Installed in Little Space 1080P Digital Video for Computer Monitor PC Older Projector TV https://a.co/d/e5P7szA It states the mount only holds up to a 26" device but my monitor is 27" and very light and it fit perfectly. I attached to the wall using anchors and its fine. The directions state not to attach to drywall only but I think if you are hanging a lighter weight device it will be fine. Very easy to mount. Took me 10 minutes to install 2 mounts. Thats with marking - Leveling - Drilling starter holes and mounting. Very easy.