eoocvt DC Converter Buck Module 12V Convert to 5V USB Cables Output Power Adapter

One year and a couple months ago, I decided to purchase a self-install security system from a big warehouse store and leave behind the stagnant, overpriced, hard-to-update, legacy system we paid a lot of money for when we moved into our house nearly twenty years prior.There was great promise of being able to control the new system via a mobile app and after installation and setup -- and bidding goodbye to the legacy monitoring company -- all of those expectations were met (and, in some cases, exceeded).The new system came with a keypad for arming and disarming the system and we figured we'd remove the old system's keypad and replace it with the new keypad and I quickly realized that the new keypad would either need to be charged from time to time or plugged in, likely with a charging cable running along the wall to our already-full duplex outlet in the laundry room.Neither of these were ideal solutions.One day, I thought, "Surely the old keypad had some sort of power coming to it because it was lighted and had to know if I entered the right code or not, so maybe..." and many of you probably know the rest of that story.I found that my old alarm system was indeed putting out 12 volts and that if I could step that down to 5 volts, ideally terminating in a USB connection, I could use that to power the keypad.A quick something-search turned up a 12v-to-5v step-down converter, and I ordered it.A few days later, I made some amateurish -- but secure -- connections of red to red and black to black (the tinned connectors were a nice touch), capped off the other wires, plugged in the micro USB cable into the keypad, and... power!This was great.I added some drywall anchors, mounted the keypad bracket, fed the bumpy length of cable and converter and USB connection into the bay between studs, slid the keypad into its bracket and I must say that it looked decent.But more important than looks, I'd never have to worry about charging that keypad again. Awesome.We bought a second new keypad to replace the old system's keypad and, of course, I bought another converter and essentially repeated the above steps for it.Cool. If #ChargingKeypad life is so good, why am I writing this review?Great question.A few weeks ago, I noticed that the "mode" light on the laundry-room keypad (effectively showing that the system was disarmed or not) -- and one or two other lights that I wasn't really sure what they meant -- were not illuminated. Puzzled, I'd approach the keypad and the mode light would come on and I thought, oh, I guess it was confused or something, and I'd go about my business.After a few times, it looked like the same thing was happening with the keypad in the bedroom, so I imagined that what must have happened was the vendor pushed out a software update to all keypads which changed something about the way the lights (no longer) stayed on.I mentioned the above observations to my brother and he hypothesized that perhaps the vendor assumed that most users were running keypads on battery/charge and that, in an effort to conserve battery for them, the company shut off the always-on keypad lights no matter what the device setting was and they just forgot about us hardwired folks. :(His theory sounded plausible, so I figured that perhaps other users would complain and get the company to change things back to the way they were. I had other stuff to deal with, so I figured that I'd just mentally wish those other users well and hope that a fix arrived sooner, rather than later.However, a week or two later, I continued to get frustrated. I'd be on my way to bed really late at night and need to let the dog out, but I wasn't sure if my now-asleep spouse had already armed the alarm. Instead of a quick far glance over to the keypad in the laundry room, I'd have to walk up to the keypad and wait for it to illuminate its armed/disarmed light. Blargh.I something-searched this no-lights-until-I'm-in-front-of-the-keypad scenario, figuring that surely I wasn't the only user experiencing this frustration, but I didn't find anything relevant. (Some users said that they upgraded from an early version of the keypad hardware to a new keypad and they no longer had mode lights, but that didn't seem to be related to my old-keypad situation.)One night, I glanced over at the bedroom keypad and realized that its lights were definitely on. Weird.I got out of bed, walked over to the laundry-room keypad, peeked at it from around the corner, and its lights were definitely off. Clearly something was different between our two keypads.The next day, I pulled up the mobile app and compared the two keypads' settings in case I'd accidentally changed something for one and not the other, but I didn't notice any such differences.However, as I was looking at each one, the battery icon caught my eye. On the laundry-room keypad, it was a battery icon. On the bedroom keypad, it was a battery icon with a small lightning bolt in the middle. Weird. I flipped back to the laundry-room keypad. No lightning bolt.Hmmm.I started to realize what had happened: a few weeks earlier, power to the laundry-room keypad must've been lost, so it was on battery power and turning off lights unless I was standing in front of it. The bedroom keypad was still powered, so its lights were still illuminated. Of course, that totally made sense.I was confused, though, since it seemed odd that the old alarm panel was putting out power to one keypad, but not the other. I wondered if maybe someone in the attic recently had accidentally severed the cable or perhaps rodents found the laundry-room cable tasty, but the bedroom cable was unpalatable.Of course, the most obvious explanation ended up being the right explanation: the 12v-to-5v step-down converter had failed. Power was still coming in, but not going out.So I ordered this item (which bears the exact same label as my old, defunct one) and swapped it out an hour or two ago and I'm back in business -- the lights on the laundry-room keypad are glowing just like they did up until recently. I'm just hoping that the first one dying was a fluke and that I don't have to add this item to my Subscribe & Save subscriptions. :)Another update: the converter powering the bedroom keypad appears to have failed, so I ordered a replacement. I figure that replacing one of these every few years is a lot better than charging it every few months. Unfortunately, we had a remodel in the bathroom on the other side of that wall and I think the cable got pinched somehow because I cannot retrieve the converter! So I'm headed to the attic to see if I can free up the cable so I can extract the (likely dead) converter and, if not, I will have a spool of alarm wire to lengthen the run so that I can fish the converter (and likely future dead converters!) out of there. Either way, not a huge problem other than traversing the distance in the attic and trying to find where the alarm wire goes through the top plate of that wall (and hoping I get lucky that I can free up the bound wire without having to splice).

I wanted to hard wire my dashcam to my truck without having to use up a 12v plug and have it hanging down in my view. This was the solution to it all.I chopped off the USB port from the converter, I chopped the 12v plug from the camera power cord, soldered the wires and tucked the inverter away in the overhead console behind my interior overhead lights, ran the wires down the up-right and under my stereo and spliced the power into the 12v plug in my console. Works like a charm! The converter works great! It's compact in size so it fits easily in my overhead console. Now I have no wires hanging down in my way, and the camera starts up every time I crank on the accessories in my truck. I think I got this for $7 so not a bad deal to boot!If you know your way around a soldering iron, this is a great product to help tuck away annoying wires.Worth it!

Works as it should.

This is a great way to get 5 volts dc in the USB form factor from a 12-volt dc source such as a car battery or deep cycle battery for a permanent application. I am using one of these to power a component of my home's Internet infrastructure (the VoIP box), which I power from a deep cycle battery so that I don't loose my telephone line during a power outage. So far, this DC-to-DC converter is working great, and the ability to mount the housing using two screws is perfect.The alternative cigarette lighter adapter form factor would have been totally clunky and not physically secure, so I am glad I found this unit.

I used the eoocvt DC Converter Buck Module 12V Convert to 5V USB Output Power Adapter along with a meross MSG100 Smart Wi-Fi Garage Door Opener Remote to open my 12v solar powered Apollo 635/636 gate controller. I was looking for a way to open my gate as my remotes would not work from my house. I have an outside mesh router so my wifi signal was strong enough some 400ft away. I connected all this and it is working perfectly. I am very happy with my purchase.

Bought one for dash cam camera in truck. I gave unit benefit of doubt when it only worked for a very short time. I thought being “5 star” that I must have a short in my truck’s system. I disconnected from overhead console and hard wired into 12v ignition and it worked at first (just like it did in overhead console) but then stopped working once job was buttoned up and tools put away. I ordered a replacement that claimed to be shipped early next day, but much later in day it updated to “running late, if not received in two days check back for refund “ I would have ordered a more expensive alternative had I known that they don’t stand behind product 100%

I needed to install a DashCam in my friend’s 2008 Subaru Legacy. So many of the newer devices use a USB power source these days; you’ll need something like this if you’re going to wire them directly to the fuse panel. This did the job and it was small enough to easily tuck behind the dash near the fuse panel. I did the install about six weeks ago and it’s working perfectly!

I had tried using other cords to hardwire my radar detector into my sunroof’s motor and the radar detector would either work intermittently or not work at all … I hooked this module up and it worked right away! I can’t attest to its longevity at this point but I’ll update my review if it fails anytime soon.