Rit Dye 88150 All Purpose Liquid Dye, Black, 8 Fl Oz (Pack of 1)

Have bought it dye for years. It works great and does it's job. Make sure to check what material you're using it in thought. It's definitely eventually washed out of clothes I've dyed because I didn't check the material.

Rit Dye Liquid Fabric Dye gets the job done, mostly. It’s easy to use and great for reviving old clothes or fixing color mishaps. The black dye works well on cotton and other natural fabrics, getting them pretty dark if you follow the instructions. For example, it saved a pair of my jeans that had a bleach spot.But, there are some downsides. It doesn't always work perfectly on all fabrics—sometimes it can turn out purple instead of black, especially on synthetic materials. Also, the color may fade after a few washes, which can be a bit disappointing. Overall, it's a good product for its price, but results can vary depending on the fabric and how well you follow the instructions.

First a little back ground. I like to make things - things I can't find elsewhere or would be too expensive to buy. I have an army cot I use for search and rescue missions. It kills my back. I decided to get some wood and velcro it to the top of the cot and lay a wool blanket over it for padding and warmth. Problem solved. Back is happy again. But this caused another problem. I needed a bag to carry the slats of wood in. So what to do?I ordered some Rit black dye and Rit fixative through Amazon Prime. As usual they were here in two days. I ordered a yard of 8 ounce cotton canvas duck from ebay for $5. I went to the Rit web site (as other reviewers suggested) and watched a few You Tube videos. I'm not sure why other reviewers find dyeing difficult. It was a breeze for me.I covered the counter tops and the floor with old towels - just in case. I warmed 3 quarts of water in a 6 quart stainless stock pot. I washed the canvas on a quick cycle while the water heated on the stove. I put the dye (all 8 ounces) in the pot, a squirt of dish soap and then put in the canvas. The canvas immediately absorbed the dye. As recommended by Rit, I put in a cup of salt after 5 minutes. I followed the directions and let the canvas soak. I also used tongs to sift the canvas in the pot. I got tired of sifting the canvas after 5 minutes and went on to another project while the canvas soaked.An hour later I poured the black water from the pot into our stainless sink. I rinsed out the fabric in the sink. The water went from black black to purple. The canvas stayed black. Unlike others I did not continue to rinse until the water went clear. I got bored with the rinsing. I sprayed the fixative on the fabric. I still had half a bottle of the fixative so I poured it on the canvas and wrung out the canvas in the sink.The canvas is a black black. Did I say black? Not purple, not blue, certainly not green. Black as night.I gathered up the towels and put them in the washing machine with some bleach for a soak. I also put some bleach in the stock pot and sink. Within 5 minutes the pot was shinier than it was when I started.I did wear old clothes just in case. But this was not a messy process.Perhaps others didn't hold their mouth right. I'm a guy. I have four daughters and a wife - so I know that women are way smarter than men. So if I can do this, anyone can.Now I need to figure out what size to make the bag and get to working sewing it and putting on some carrying straps.

Works well

I use Rit dye all the time, here are some helpful tips!Step by StepCHOOSING FABRICS. Rit works best on many natural, washable fabrics and materials, such as:a. 100% cotton, linen, silk, wool, ramieb. Synthetics such as rayon and nylonc. Fiber blends with at least 60% cotton or other dyeable fiber (blends will tint evenly but will not achieve full color)d. Nylon-based plastic such as those found in buttons, fasteners and lacrosse stickse. Natural materials such as wood, wicker, paper, feathers and corkBut there are fabrics and materials that will not accept dye, such as:a. 100% polyester, acrylic, acetate, fiberglass, spandex and metallic fibersb. Fabrics with rubber backing (bath mats or throw rugs)c. Fabrics with special finishes such as water repellentsd. Fabrics with bleach damage or extensive staininge. Fabrics washable only in cold water or labeled “dry clean only”f. Polyethylene plastics such as golf discsg. Polycarbonate plastics such as eyeglass framesFiber content and weight also effect how color appears making fabrics like cotton, wool and silk absorb dye differently, slightly changing the hue and brightness of the chosen color. If you are in doubt as to whether your fabric will accept dye or achieve the color you want, we recommend testing a swatch.DYE PREP. Cover work area with a plastic table cover or newspaper and have paper towels or sponges handy to protect against any possible spills.Wear rubber gloves to protect hands from getting stained and to insulate them when working with hot water.Use plastic buckets or stainless steel pots for the dye bath. You can also dye in a stainless steel sink. Don’t dye or rinse items in a porcelain or fiberglass sink or tub as they are likely to get stained./p>ACHIEVING TRUE COLOR. Always follow manufacturer’s care instructions for your fabric as well as Rit Dye package or bottle instructions.Remove stains on fabric or use Rit Color Remover before dyeing to get fabric to an off-white or cream color. This will help achieve uniform color results when dyeing.Dissolve powder dye thoroughly in 2 cups of very hot water first to avoid dye spotting. Stir dissolved powder dye or well-shaken liquid dye into dye bath until evenly dispersed. Never pour liquid or powder dye directly on fabric unless looking to achieve a specific creative effect.Be sure to use enough dye for the weight or size of the project. For example, for a pound of dry fabric (about 3 yards), use one package of Rit powder or 1/2 bottle of Rit liquid in 3 gallons of water. You want enough water for the fabric to move freely in the dye bath so that it can absorb the dye evenly across the garment.When dyeing 1 pound of dry fabric in dark or bright colors such as Black, Dark Brown, Cocoa Brown, Navy, Purple, Wine, and Dark Green, use double the amount of dye (2 packages of Rit powder or 1 bottle of Rit liquid) in 3 gallons of water.For the deepest color, use a water temperature of 140ºF/60ºC and keep heat constant while dyeing (the stove top method or a washing machine work best). Note: If tap water is not hot enough, heat water on the stove, in a teakettle or in the microwave.If dyeing a garment more than one color, it’s usually best to start with the lightest color and move to the darkest.For more intense color when dyeing fabrics containing cotton, rayon, ramie, or linen, add 1 cup salt to the dye bath. When dyeing nylon, silk and wool, add 1 cup white vinegar to the dye bath. If possible delay adding the salt or vinegar until 5 minutes after the fabric has been in the dye bath. The delay will help to promote level dyeing.Add 1 tablespoon laundry detergent to all dye baths to help promote level dyeing.The longer the garment is immersed in the dye bath, the deeper the resulting color. Items can remain in the dye bath up to 1 hour as long as the water remains hot. You’ll also have to make sure the item receives constant agitation or stirring.Garments will also look darker when wet and prior to washing.When you remove clothes from dye bath, rinse in warm, then cool water until water runs clear. (Warm water helps to rinse off surface dye more effectively.)Wash your fabric/clothes in warm water with mild detergent and then rinse thoroughly in cool water. Machine dry or hang dry.CARING FOR DYED ITEMS. For the first two or three times, wash your dyed item by itself in cool water with a small amount of non-bleaching detergent. Always wash your dyed clothing with similar colors in cool water with mild detergent. Dry cleaning silks and special fabrics is recommended.CLEANUP. Clean containers and sinks immediately after dyeing by scrubbing with hot water and powdered cleanser or bleach.Clean washing machine using highest water level with hot water, detergent and 1 cup chlorine bleach using complete wash cycle. Clean lint traps. Plastic or rubber machine parts may be tinted but will not stain laundry.

Not nearly as potent as I was hoping/needing. If anyone knows of a better dye for making clothing legit black that lasts more than a single wash, lmk 👍

Ordered black and Navy dye to darken a pair of jeans. I mixed half of each bottle with water and salt and poured into the washer with hot water and then added the jeans. I let the wash cycle run for 45 minutes before rinsing and then washed the jeans on delicate with a gentle detergent. When it was done, I hung the jeans to dry and wiped out the washer. It worked very well! I basically just followed the instructions from RIT. You can still see a bit of color variation in the denim, but they look so much better.

The only brand to buy for dying fabric. Even works on certain synthetic fabrics. Follow directions carefully for best effectiveness.