WHITE SKY Refill Ink for Canon Printer 300ml with Thumb Drill Compatible for Cartridges PG 745, CL 746, PG 740, CL 746, PG 810, CL 811, PG 88, CL 98, PG 89, CL 99, PG 47, CL 57, PG 830, CL 831 with 4 Syringes

Good for colour printing.

Very bad ink,prints white lines

Value for money - YesGood print quality - Print quality is good but it gets dry quickly and not supporting after 4-5 days. Every time nozzle clearing process is required by deeping in hot boiling water onlyWell equipped set - Yes

The ink is of sound quality. In the box, you will get 75gm of each colour (4 in total), 4 syringes, 1 drill tool, 1 pair of gloves and a manual. Actually you need not use the drill tool because the cartridge already comes with an hole in it. You just need to confirm the respective colour and inject it through the given hole into the cartridge.

Delivered before expected delivery date.Packing was good, no spillage, breakage etc.All declared items were in the small carton & intact.Refilled both color & black cartridges (before its empty), I didn't use the thumb drill, instead made pinholes using a warm needle, good enough to accommodate the syringe provided with the package.This is first time I am refilling a printer cartridge, so it took lot of time, after watching various videos, reading literature to ensure perfect refill.Beware there are many misleading videos in the internet (eg: One video showed the wrong position for drill hole for the black cartridge)I was apprehensive of the quantity of ink to be dispensed for color cartridge & took support of Mr Alvin. He cleared all my doubts.After the ink was dispensed, I ensured no air-bubbles are trapped in cartridge, by sucking out air bubbles using the same syringe, until a steady stream of ink is drawn out of cartridge.The pin hole is covered with a small piece of duct tape and then pricked a pin hole to ensure air passage is established.Quality of print outs: I would rate it 75% of Canon Quality for documents, though I observed some very faint ink bleeding on letters in black prints. I presume the culprit has to be the 70GSM copier paper. Probably things can improve if I try using 100GSM copier paper or even Kodak photo quality matt/glossy paper. Photo prints taken on 4×6 photo paper and it was good, except that black is slighly on greyish side. Same is case with documents,. I think black needs a stronger shade...Only concern is that the ink level is never updated on your computer/printer software, so you have no clue when is the next refill due. The only option is keep a tab on no: of print outs taken and a keep close eye on quality of prints.Other Tips:Dispense Ink very slowly into cartridge, 3-4 ml for color takes 1 minute.Mark the name of each color on syringe using permanent marker, ensuring that same color ink is used in that particular syringe during your next refill.Wash dry the syringe needles thoroughly after use. Try to take print outs (color and black) at least once a week

Everything is in box as described.My printer is Canon MG2570S, Cartidages are PG 745S & CL 746S.I drilled small holes with geometric compass.Filled Black Cartidage with 7.5ml & Colour Cartidage each hole with 4.5ml (Color code is in Instruction manual).Print Quality is very good.I use printer for general needs in home, Met my expectations.

I don't like the thumdril because its broken. Gloves is just a pair of plastic. The ink quality is the worst. Water can easily wash away the ink. Just a waste of money.

Product is good bit delivery it took more than a month.