Safari Style

When I first received the doors, i was missing the wedge rubber spacer for the driver-side mirror that every talks about. Figured I'd install them first to make sure nothing else was missing before contacting the seller. With a little help from YouTube, I found the installation quite easy. Here are a few tips that helped me. After removing the stock doors, screw the stock hinge bolts onto the new door hinges. They'll be a little difficult, but be careful, and once you get them started, they'll screw on just fine. Doing this will make threading the bolt on the Jeep much easier. Then remove them and set them aside. Next attach the hinges to the door, but do not tighten them, leave them a little lose. Next put the door on the Jeep, secure the hinge bolt tightly, then tighten the hinge hardware. By doing it this way, my new doors lined up perfectly. Then adjust the door latch so it closes tightly. I had to adjust 3 of my 4 doors. I read a lot of complaints about rattling. I suspect this is because the door is not latching correctly. Remember, there are two positions for the latch; the first is a lose catch, but you must close the door firmly to get the secondary position of the latch to catch. When that happens, the door is securely closed. I have to use a bit of force to do that, but that's okay with me. There is a rubber pad, which is the only piece making contact with the Jeep body (other than the latch, of course). So slamming the door shut does not damage the door frame. After getting the doors adjusted, I attached the mirrors. After attaching the driver mirror, I hopped in to see how bad it was. Apparently they fixed this issue because not only can I see just fine in the mirror, I actually had to adjust the mirror in a little! No wedge spacer required. So I did not have to contact the seller, all the parts were there and work fine. And now that they are installed, I love them! Absolutely love driving around with so much openness. I love the style, and the way they look on the Jeep. I highly recommend these doors from EAG. A great value for the price.

Couple things though: There was slight cross threading on the hinges (where the original Jeep door bolts go). Had to work very carefully to make sure not to strip the screw. Also, the rear doors do not sit flush with the car. They protrude about an inch to the side in the rear. The company suggested I adjust the striker but I decided not to do that as it would be a pain to readjust to fit the stock doors. Lastly, you have to slam them pretty hard to ensure the double latch mechanism engages properly. It’s either that or the doors will rattle. Overall, however, I’m definitely pleased with my purchase. The doors are sturdy, look great, and the reflection in the side mirrors is very clear (much more so than the factory rear view mirror). They do wobble slightly with the wind though, but not enough to be a nuisance.

rarely used these doors look amazing. the issue is they dont latches the don't seem to fit properly. I've tried all adjustments, but they rattle so bad that they just pop open while driving down the road. It's like they are missing a rubber bushing or something.. but can't reach out cuz there is no contact information to reach EAG.

So easy to install and they look great. I just had to find the right Allen key that is not included in the box. And it worked perfectly. They feel nice and heavy. It’s better to do it with two people since the doors are a little heavy and it’s your first time taking off the doors of your jeep. I always check the weather once I switch Also! If you have trouble closing the doors, you can move around the latch and it’s totally adjustable. You can use YouTube and view how to do it. So easy! I always check the weather when I want to switch them up since in south Florida the weather can be a bit crazy! I can recommend them! Another thing I liked is that the name of the brand is not overwhelming.

Overall, they look good. Biggest issue is the initial hinge install. Nuts and bolts not being same color as door. Doors don’t sit flush in door jam and they rattle while driving. The pad is too thin to keep them snug. Great value and taking them off and putting them back on should be much easier like the Jeep stock doors. Didn’t have issues with the mirrors like many others mention; see just fine with no wedge or spacer.

Don’t listen to the negative reviews. These things were not that difficult to put together and install. Took some patience and some time but ultimately they’re great. No rattling after a few minor adjustments. Hardest part was getting stick door bolts to grab onto the door bolts. Took a few minor adjustments but got them all on nice and tight. I cannot imagine a need to pay double or triple for other versions of doors. These are great for the price. Only issue is with the one mirror housing not staying in place. Passenger side works great ... drivers side won’t stay in place. I just emailed the manufacturer so I’ll give them a few days to respond.

I have a 2021 Jeep Rubicon 4Xe and the doors fit great! Just a few things from UPS that delivered the doors was the box was completely destroyed however the inside was expertly packaged and was no damaged to the doors or mirrors. There was no instructions in the box but my guess was it was lost through the many holes in the damaged box. I laid all the hardware out and it was pretty easy to put together. I was able to put together and install all four doors in less then 45 min. Looks great and love the open feeling.

Installed on Jeep Sahara 2019 and love it. The doors provide open road feeling yet keep passengers from rolling out of the vehicle. The hinge straps for the front door were missing and customer service mailed them after emailing them via Amazon. The card in the box has a dead email address so either call or use Amazon message system. Doors were pretty easy to install, but one needs to be a bit handy with adjusting the hinges and lock mechanism which all move when the associated bolts are unscrewed. The jeep door hinge screws take some patience getting onto the EAG hinge pin screws and I almost rethreaded one so its best to screw them one before trying after mounting on the jeep. Instructions are a bit light, but again if your handy, not a bit issue.