LeMotech ABS Plastic Dustproof Water Resistant IP55 Junction Box Universal Electrical Project Enclosure White 3.4 x 3.4 x 2 inch (85 x 85 x 50 mm)

I'm not exactly using this for what it was intended but it's actually the best way to hide excess cable and tidy up your work or media spaces. None of the products meant for cable management fit the solution I was going for as well as this product does. Highlights: - comes in a variety of sizes. - has multiple access points that you can use according to your need by removing the rubber seal. If you change your mind the seal can easily be popped back in place. No drilling required. - closes securely with screws so it won't open unintentionally. - price is right I'll be using these going forward for all my ocd cable hiding.

Works great as a junction box and you don't need to apply connectors, due to the soft rubber plugs through which you poke your wires. Price is far better than the old style electrical boxes.

Pros: - Solid, sturdy. - Good access ports. Cons: - No rear access (I just cut my own holes on the back. I'm using this for coax cable. The cables have 5 lines with a splitter. I should have got the bigger one.

These are great for bring wires into a shop, home or building and keeping the bugs out.

At Atlanta RV Center we design and install off grid RV power systems. We typically use Multiplus inverters and this box provides a right sized box to splice into the shore power at a good price point. We love this product. Just add din rail, terminals, and NM connectors. Or call us to install a system for you.

Reviewing: (10 x 7.9 x 3.1 inch (255 x 200 x 80 mm) OK box for an ehhh price. Rubberized grommets are well-fitted and feel like a decent quality rubber material. Very sparse mounting options for interior components. Because of this, I had pre-designed a backplate with a grid of m3 holes 5mm on center with cutouts to slot over the inner protrusions, so it would sit nice and neatly in the base. Fortunately there are drawings with all of the necessary measurements. Unfortunately they are not completely accurate. The set of double holes are listed as 186mm O.C. when they're actually 196mm O.C.. This isn't a big deal, just that I put too much trust in the drawings up front. For ~$20, I'm not super thrilled with the overall construction. I'd be much happier with a price point of $12-15. Not only is it a pain to access because it requires removing all 4-screws, the screws feel like they're softer than the plastic and probably won't last very long if frequent access is needed. I would have expected even a low-grade stainless screw here considering their key role in the weather-resistance system. Honestly, aside from slightly better aesthetics, you could probably hobble together a more functional unit from a plastic ammo box and some silicon for about half the price-- and that'd have a latched/hinged lid. I purchased this for a portable DC powered lighting rig (an automotive light bar on a portable tripod). It houses a 10A switching power supply with decent room for wiring including a 30A relay, the fuse harness for the DC supply, a switched power supply bypass circuit to allow direct 12V input from a car battery via banana plugs and finally a 40mm blower case fan to help the components breathe through a breathing tube

This is definitely a quality plastic junction box. It has a nice rubber gasket in the top and the top is held in place with four corner screws. I particularly like the very flexible gaskets on the cable holes that allow you to remove just enough material so they have a snug fit around the cables.

5 star, great quality, price and service. Highly recommend

What would you use this box for? As an amateur radio operator I would use it for a coaxial cable entry point for my shack. Where the box is usually mounted low to give better access to earth stakes and where the cables come in beneath the radio. And for this it is perfect……until you go and try and reattach the lid. The holes for the lid screws are large but the screws are tiny. Not even my magnetic screwdriver could hold the screws horizontal enough to get these tiny screws centred in the large hole. Much swearing, much dropping tiny screws in the dirt, a sore back from stooping so low for so long and I was ready to kick this box to kingdom come. In the end the only way I could do it was to dip my screwdriver in silastic and shine a very bright light down the hole. Success at last but my plan to cut back drinking has failed tonight.

Great item works well

Se recomienda amplia mente muy buena calidad

防犯カメラ屋外用、センサーライト電源中継ボックス用に購入しましたが軽量ですがパッキン付きで安心です。

parfait