Cable Matters 2-Pack Premium XLR to XLR Cables - 6ft, Male to Female Microphone Cable, Oxygen-Free Copper (OFC) Mic Cord, Black

TL;DR: These cables are extremely nice quality and are free of interference and defects for a fairly low price. I ordered these because the last few cables I bought from CableMatters were pretty good quality and arrived very quickly. These were also the right length and price for what I was looking for, except I was going to end up with *2* cables for the price I was expecting to pay for a single cable. They came in a padded Amazon envelope and inside a single plastic bag within this envelope; the bag also had a large label on it saying it should contain 2 cables and warning the distributor that they are to stay packaged together in a pair. I guess they've had issues with separation, kind of made me laugh a tiny bit because this warning label is so prominent. I disassembled the connector on the female end just enough to check the assembly and material quality, since I just assembled one of these recently and I knew it would be easy to take apart and put back together. I wanted to make sure I got what CableMatters claims to sell, and I'm happy to say it looks like it's all exactly what they said it is on their site. WIRE/CABLE: Anyway, these cables are very thickly insulated with copper braid shielding. Supposedly there's foil in their under the copper braiding, but I couldn't see it in there and I don't want to damage anything digging for it. (Braided shielding is more effective, more expensive, and usually provides lower resistance path to ground than foil, but adding a layer of foil provides complete coverage against interference.) Inside of the shielding, there are two conductors (separately insulated wires--hot and ground) that are very thin gauge. I'm not sure what gauge, but I'm guessing it's like 24 or 26 AWG. The jacket of the cable (outermost layer) is soft, thick, and should be made of PVC but I don't know how to tell what the material actually is. Scratching it with my nail doesn't seem to hurt it. Text is printed at regular intervals on it in a very clear font; it contains their logo and reads, "Cable Matters (THEIR WEBSITE URL)HIGH QUALITY MICROPHONE CABLE" and does not otherwise describe the ratings or properties of the cable; I would have liked to know the ratings and maybe who manufactures the cable material (I don't think CM makes the wire in-house, I think they just modify and assemble it), but that's me. CONNECTORS: You can disassemble these connectors by gently unscrewing the black plastic strain relief cones from the metal connector housings. The connectors seem to be some Neutrik XLR gold-plated connectors, which have been repainted in semi-gloss black, do not have the stamped NEUTRIK labels on the strain relief or housing, and have a silkscreened small CableMatters logo opposite of the latching mechanism. I'm not sure which model line (eg XX, EMC) the connectors are, and I can't be completely sure if they are actually NEUTRIK or just look the same. The springy plastic ring around the strain relief can probably be swapped for Neutrik's XXR-n (swap n for numbers 0 through 9) color coding rings. These are currently $0.25 or so each if you order them from electrical supply companies, such as Mouser or Allied, but if you really want them from an Amazon vendor, I saw a listing selling them for $6 *each* with an additional ~$7 in shipping, or another listing that sells them for about $8 shipped. :) The paint looks like the polyester powdercoating that I've seen on Hoffman industrial enclosures at work, except thinner, so I believe it's the same stuff. It's not a very tough paint, in my experience; it will probably scuff somewhat easily if you drag or hit it against metal, but I also think that since it's thin, it probably is at least not going to have poor adhesion or just flake off, and it shouldn't get damaged by fingernails, wood, or plastic. The wires and shielding are soldered to the connector pins and tab; the solder is shiny, I was not able to pry off any connections with my fingernail (I'd rather know if they are cold-soldered sooner rather than in the middle of a gaming session), and the insulation of the wires and connector isolator material are not deformed or melted. These cables are probably assembled by hand and the workmanship is absolutely fantastic. SOUND QUALITY: Using the direct monitor setting, even with my pre-amp's mic gain setting turned all the way to +60 dB, the sound through this cable is crystal-clear and no detectable hiss. I can clearly hear sparrows chirping and wind blowing through my open window with how high I have the gain set; when I swap to my old cobbled-together coax abomination cable, there is a lot of popping, there is a low hum, and everything going through my mic sounds horribly distorted. I wish I had a "real" XLR cable that I could compare it to. NOTE: My pre-amp has noise filtering, so it's possible that some interference may still be getting picked up in this cable and the amp is managing to filter it all out enough that I can't detect it at full gain. The pre-amp definitely doesn't filter much noise from my other cable, though, so I think this cable from CM blocks interference extremely well.

We use the Cable Matters 2-Pack Premium XLR to XLR Cables (10ft) for our Sake & Hot Tubs podcast, and they’ve been fantastic. -Clean, consistent audio with no hum or noise -Connects securely to our mics and interface. No loose or wobbly ends -10ft length is perfect for a flexible studio setup without excess cable mess - Feels durable and well-made, not cheap or flimsy - Nice bonus that it comes as a 2-pack. Easy backup or second mic ready to go If you’re running a podcast or any basic studio setup and want something reliable that just works, this is a great buy. Five stars all day.

This works perfectly with my vintage RadioShack MPS-31 amplifier (made in 1994) and an old Shure mic made in the early 2000's. I'm really impressed by the heft, solid feel, and craftmanship of this cable. This isn't one of those thin, fragile cords that so many companies are selling nowadays. Anyway, as a Cable Matters customer since 7 years ago, I'm not surprised by the quality. Every single item I've ever bought from them is long-lasting and does exactly what it promises. By the way, I bought an adapter on amazon (XLR Female to 1/4 inch TS Mono Male Plug Cable Adapter) to connect my cable to the old amp and mic, and this XLR cable works beautifully with both the adapter and the sound equipment. It's easy to use, no fuss: you just plug in and go. Quality product, highly recommend!

Good quality. Got them same day. Feel as good as the more expensive ones I have.

These are still new to me but as a first impression they work well and seem very well made. The best feature and its fairly unique and the reason I picked these is they offer a 35" size. I'm finding that 25' seems to be universally just 1 to 5 foot too short at least half the time on a small stage. The 25" usually are not laying on the ground all the way from the mixer to the mic stand causing tripping, knocked over stands and damaged cords. 50' are always leaving a big pile of wire casing a tangle mess, still a tripping hazard and taking more time to pack up plus may cause signal loss. The cables jackets are quite thick heavy and durable feeling. I checked a few of the solder joints and they looked well connected.. The ends are very tight fitting into my Mics and sound equipment with good strain relief. I agree that the wire is not 16ga. Looks more 22ga to me too. But that is typical for a good mic cable. The heaviness of the jacket seems to let them lie flatter on the floor. Assuming you dont wind them up in a tiny ball like it comes from the factory. Do yourself a favor and straighten them out and uncurl them. Then reloop in a big easy 16 to 20 " loop with a velcro or twist tie. I'll try to update as longevity will be the true test.

They work and are cheap. My audio interface had no issues using them.

These cables are an excellent buy. Quality materials and connectors. I ordered a pack of 10 footers and a pack of 15 footers.

These are high quality cables. Very pleased with this purchase. Well worth it.

The Cable Matters 2-Pack Premium XLR to XLR Cables 10ft are exactly what you want from professional microphone cables. They feel durable right out of the box, with strong connectors and thick, flexible shielding that inspires confidence for both studio and live use. Sound quality is clean and noise-free. I have used these with microphones and audio interfaces, and there is no hum, interference, or signal loss. The male and female connectors lock in securely and do not wiggle or loosen during use, which is critical in live or recording situations. The 10-foot length is perfect for most setups. Long enough to stay flexible with placement, but not so long that you end up with unnecessary cable clutter. Having two cables in the pack is also a great value, especially if you run multiple mics or keep a spare on hand. Overall, these are reliable, well-built XLR cables that perform exactly as expected. Five stars for excellent build quality, clean audio performance, and great value for the price.

Using in a non-traditional way as xlr plugs are also used in many other applications. Using mine to "reveal" or make accessible the charging port on my powered wheelchair. Enables me to plug in my charger without having to grub for the charging port.

Très satisfait !!

Kabels zijn van goede kwaliteit en ook geluidskwaliteit is goed. Uitstekende prijs kwaliteit verhouding

Excelente producto