OEM Front and Back Housing Shell Replacement Kit for Xbox Elite Series 2 Controller - Includes Faceplate, Grip Cover, and Repair Tools (Halo-Green)

This is spot on the best replacement product on the market right now for Xbox controllers. My controller grips came off the original and it was all beat up when I put the new one on. It was literally just like a brand new controller. The tools worked perfectly. It is very durable if not better than the original. It was great value for replacement part to feel is just of that as the original it fits perfectly. Everything provided was pretty straightforward and worked just as they needed to and now I have a few extra tools to throw in the toolbox as well.

If you use Xbox Elite Series 2 controllers, you know they literally start falling apart after 6-12 months of regular use. This kit was everything I hoped it would be when I ordered it. Shell looks and feels like first party Elite Series 2. I followed a 5 minute YouTube video titled "Instructions for replacement shell for elite 2" that uses this exact kit and everything went flawlessly and the controller feels brand new. Repair took about 30 minutes on the couch, and with a proper workstation it could have easily been <20 minutes. Save a bunch of money and get tools that are perfect for tinkering with future controllers. What's not to love?

Have purchased this item twice as BOTH my Elite 2 controller grips started peeling off. Much to my surprise, when removing the original casing the controller is a thin layer of plastic with a silicone like material laid on top. Over time the glue separates from the plastic & then the plastic breaks. I haven't dropped my controllers either. I also purchased back paddle inserts to tighten up the input lag. I really like this kit but recommend using a better screwdriver as the heads strip easily.

Ok so the case is great, it feels high end and identical to the one already on the Elite V2. Soft rubbery plastic, super high end replacement. Swapping the internals over is not very hard but it is tedious. Just watch a youtube DIY video if you need to but it's very straightforward once you get in. In my second pic you will see a white sticker above the D pad to the right of the left analog there is a screw hiding under that and you'll have to break it or peel it up. The con to this set are the tools, they are plenty enough to get you going and get the controller disassembled, the problem comes when threading the screws into the new case you need a bit of force and that amount of force strips the bits for every one of them except the biggest size. Had I not already had a good precision set I would now be waiting a day or two for a new set of tools. Make absolutely sure to get at least a cheap set of precision driver bits with as many as possible or if the exact ones are listed in this listing then just make sure those are included, I cannot remember the sizes. They are all safety torx, 3 different sizes. Also if you for whatever reason want to not mangle the old controller case get a plastic spudger as this kit comes with a metal one and it destroys the original case. No big deal for me as my case's rubber overmolding was peeling off I wouldn't have reused it ever. Good luck!

I recently undertook a shell replacement for my Microsoft Elite Controller 2, primarily because the original textured hand grips were unfortunately starting to peel off. After completing the swap, I can confidently say I'm incredibly pleased with the results. The replacement shell worked exceptionally well. While the process required a bit of guidance, the video tutorial provided on the Amazon listing was invaluable and made the installation straightforward. The included tools were also very helpful, ensuring I had everything I needed to perform the operation. Visually, these replacement grips look exactly like the original equipment manufacturer (OEM) parts. Looks good, and the controller feels brand new in my hands. During the shell swap, I made a crucial discovery: the controller's internal Li-Po battery was significantly puffed out, indicating damage. This was a critical finding, and I promptly ordered a new battery from Amazon, which thankfully arrived the very next day. Now, with both the new shell and a fresh battery, my expensive controller is good as new. This shell swap was definitely worth the effort, not just for the improved grips but also for uncovering and addressing the battery issue. Highly recommended for anyone facing similar wear and tear on their Elite Controller 2!

My only complaint after roughly a year of use is the rubberized parts of the grips have a tackyness to them that hasn't went away. Otherwise I cannot tell the difference between this and the original shell. I still use the toolkit for other projects as well.

It worked as advertised! Nice fit and finish. My controller looks as good as new. I followed the directions outline in the video on the Product page. The most nerve wracking part was the removal of the old case, though if you are discarding it, it doesn’t matter if it cracks. After that everything was smooth sailing. I am very happy with the outcome. I would recommend this kit to others.

Looks just as good as the original.

Muy bonito y fácil de ponerlo, sinceramente lo volvería a comprar

Works well and fits perfectly . note: fiddly job to do, but some good info on YouTube

So far it's amazing. I jist used the top part. Am changing the bottom part soon. Tools provided for the task. But a small instruction would be better. Rather just sending the item and leave it on the customer to figure out how to.

Der Artikel hält genau was er verspricht, zumindest für mich ist er nicht vom Orginal zu unterscheiden. Aber: es liegt weder ein QR Code noch eine Anleitung bei. Auf YouTube findet man Videos die das Öffnen des Controllers beschreiben. Dabei ist aber zu beachten dass fast das ganze Innenleben ganz einfach hergenommen werden kann, viel mehr Arbeit ist nicht notwendig. Auf keinen Fall die Sticks demontieren. Das beiliegende Wekzeug ist ausreichend und sehr hilfreich. Vor dem Zusammenbau sollte überprüft werden ob die beiden runden Magnete richtig montiert sind ( ziehen den Controller in Position beim Laden in der Ladeschale ). Diese müssen mit doppelseitigem Klebeband- das leider nicht beiliegend ist fixiert werden. Empfehlenswert ist auch die Paddels vorher zu testen. Ich habe dafür ca. 30Minuten benötigt, habe mir aber auch viel Zeit gelassen.