TP-Link Deco BE33000 Quad-Band WiFi 7 Mesh System (Deco BE95) for Whole Home Coverage up to 7800 Sq.Ft with AI-Driven Smart Antennas, 10G Multi-Gig Ethernet ports, Replaces Router and Extender(2-pack)

Trabaja muy bien, super veloz. El único problema es el conector de alimentación a la corriente eléctrica se desconecta con mucha facilidad solo, no embona bien o es muy corto y no se alcanza a fijar bien al aparato.

I bought the Deco BE95 to replace an Orbi RBK853 (WIFI 6) system. Although I my internet was a 1.5Gbs service, the Orbi was only getting 500-600 Mbps downloads to my devices and we experienced unusual drops and a few areas with poor coverage despite 3 units all connected via Ethernet. It took me about 15 minutes to set up the Deco BE95 and configure it with the same network name and passcode so all of our devices immediately reconnected. It was an exceptional decision. With only two units (vs. 3 for the Orbi), I’m getting full 1.5 Gbps downloads on our WIFI 6E and 7 devices. On older WIFI devices, I’m getting 650+ Mbps downloads. On the WIFI 6E devices, I’m getting 900-1000 Mbps in areas of the home the Orbi (with 3 units) was struggling to get 100-200Mbps. It was super easy to set up and I’m getting full speed within 40 feet of the Deco and almost full speed everywhere in the house. And, when my internet provider soon switches to 3Gbps internet, I’m confident the Deco will handle that with ease also. Great purchase and future proofed WIFI.

So this system has the best coverage and speed I have seen from a mesh system. So I purchased a 2 pack of these to cover a 3600sqft 2 story house. Now on average we have minimum of 55-60 devices on our network daily. Our family streams a lot of content and with the kids gaming our needs are quite great. My internet is 5gig fiber with symmetrical speeds. I have one unit upstairs and 1 downstairs both located centrally on each floor. Now these units are big and there heavy so I also purchased the wall mounts for this specific model which made things much easier. Now getting this system up and running was an absolute breeze using the deco app. I plugged my first unit in now with these it doesn’t matter which one you use and both units are identical in these sets. I have this first one plugged directly into my ONT with cat 6A cable. I then proceeded with the setup and once I got the first one up a running I plugged the 2nd one in and waited for that one to sync. Since these sets are matched pairs there’s no special sync process needed. Now once they were both up and running the deco app installed a new firmware update which took under 5 minutes to complete. Once both units were back up all my devices connected immediately without any problems. All devices came back online and the stability was outstanding everything from our tv’s to our cameras has absolutely excellent signal to each of them and speeds across my wifi 6E and WiFi 7 devices was incredible. Now I tried my satellite node both with wireless backhaul and my normal wired backhaul because I was curious what the speeds would be. Now wirelessly my download was 1.3gbps and on the upload I was at 1.2gbps which is absolutely outstanding. I then went back and plugged my cat6a cable into my downstairs satellite to achieve my wired backhaul with my device topping at a staggering 1.9gbps on the download and 1.6gbps on the upload and again outstanding performance. While there’s a definite difference with wired backhaul this systems performance is very good in both scenarios. Since this is the flagship model the overall value of this while steep on price your definitely paying for a premium quad band system that has insane coverage and speed capabilities. Bottom line this system has massive potential and controlling the system is very easy and it even has a very basic webgui if your not a big fan of cloud based apps either way this system performs as it should and does everything very well.

I preordered last week of may and was given estimates ship date of June 15, then Jun 1 and to my happy surprise delivered on Memorial day. The packaging for this 2 system Mesh system is stellar. Clam Shell boxing reveling 2 cylindrical Mesh devices that are solidily built. Using the Deco app was the easy and had the Main router configured within 10 minutes. I had to change the IP address to fit within my network and once changed I was able to configure using the web browser. Both the web browser and app surprisingly gave me alot of configuration detail and the app is actually excellent giving the end user alot of great detail info...impressive. Once I had the main router configured, I simply powered the satellite and the Deco app immediately detected it and configured the satellite to my main router and network...easy!!!!. I moved the satellite to the living room area and did speedtests, not only did I have full wifi signal the speedtests were delivering phenomenal wireless speeds. I have 2 Netgear extenders and they are wireless connected to the Mesh system and is working well with one another in addition giving me better speeds at the extenders than my previous setup. In addition, I configured the IoT for both the 2.4 & 5 ghz band and that is made possible by WiFi 7. All of my IoT devices are on a dedicated band, freeing up the rest of the network to work on the other 2.4 band. The main unit is running about 120 F temp and the satellite is around 109 F. Definitely warm but not a deal breaker. I have been waiting for a good mesh system to arrive and WiFi 7 is the way to go, granted TP link Wifi 7 Mesh is pricey but worth it. I have used Asus routers and their mesh system and Netgear Orbi Mesh as well. To be fair my Asus system with 2 routers and mesh worked well, but I was not getting the wireless speeds that I have with TP link. The Netgear Orbi AX5300 is great, but the app is buggy and the amount of user info was lack luster and disappointing. Tp Links Deco app is well thought-out and gives me alot of great info including the actual wireless strength of all connected devices...it's really good and yes your able to monitor the system remotely because its connected thru their cloud system...nice. This is the Mesh system to have..2 devices covering 7000 sqft(overkill in my 2,300 sqft home) wifi dead zone killer and great app and configuration. JUST BUY IT

The TP-Link Deco BE33000 has been one of the biggest wastes of money I have ever made on networking equipment. For such an expensive, supposedly high-end Wi-Fi 7 mesh system, I expected excellent performance. Instead, my experience has been extremely disappointing. The connection is unstable, the coverage is surprisingly poor, and the units run extremely hot. Devices constantly seem to switch between bands/frequencies and access points, causing interruptions and inconsistent connections while moving around the house. I spent a great deal of time changing settings, optimizing the network, repositioning the units, and troubleshooting, but nothing solved the problem. What makes this even more disappointing is that I previously tried the Deco BE22000 and experienced very similar problems. The BE33000 also consumes a significant amount of power for a system that, in my experience, does not provide the coverage or reliability that should come with this price. The most shocking comparison is with my old TP-Link Deco X50. The X50 is an older and much less expensive system, yet in my home it provides better coverage and a more stable connection than the BE33000. That should not be happening with a product that costs this much. After spending a long time researching other high-end mesh systems, I am moving away from Deco and looking at the ASUS ZenWiFi BQ16 Pro instead. Based on my experience with both the BE22000 and BE33000, I cannot recommend these systems. If you already have a stable Deco system such as the X50, do not assume that spending a huge amount of money upgrading to the BE33000 will automatically give you better coverage or reliability. For me, it was an expensive and extremely frustrating disappointment.