Keyless Entry Remote Control Key Fob Replacement Fits for GMC Sierra 1500 2500 3500 2019 2020 2021 2022 2023 Chevrolet Silverado 1500 2500 3500 HYQ1ES 13522904 13522854 433 MHz

Arrived today. I programmed it myself—was a bit nervous, but it worked perfectly! I used the 30-minute programming method (basically 3 minutes of actual steps and 27 minutes of waiting for the dash to allow the next phase). This method is for when you have either NO smart key or only ONE smart key. What I learned is that if you already have TWO programmed keys, you can use the much faster method instead. But if you don’t, then the 30-minute method is the way to go. Very satisfied!----------------I'm posting here the method I used. ---------------------REMEMBER THAT BEFORE YOU EXIT THE PROGRAMMING PROCESS, YOU’LL NEED TO REPROGRAM YOUR OLD KEY FOB AS WELL—THIS METHOD ERASES ALL PREVIOUSLY STORED KEYS AND PROGRAMS NEW ONES ONLY.If there are no currently recognized transmitters available, follow this procedure to program up to eight transmitters. This feature is not available in Canada. This procedure will take approximately 30 minutes to complete. The vehicle must be off and all transmitters to be programmed must be with you.1. Remove the vehicle key from the transmitter.2. Insert the vehicle key into the key lock cylinder on the driver door handle; then turn the key counterclockwise, to the unlock position five times within 10 seconds. The Driver Information Center (DIC) displays REMOTE LEARN PENDING, PLEASE WAIT3. Wait for 10 minutes until the DIC displays PRESS ENGINE START BUTTON TO LEARN, then press the ENGINE START/STOP button. The DIC display will again show REMOTE LEARN PENDING, PLEASE WAIT.4. Repeat Step 3 two additional times. After the third time all previously known transmitters will no longer work with the vehicle. Remaining transmitters can be relearned during the next steps. The DIC display should now show READY FOR REMOTE # 1.5. Place the new transmitter in the transmitter pocket/insert. Open the center console storage area and the storage tray. The transmitter pocket/insert is in front of the storage area next to the center console storage area between the driver and front passenger seats.6. Press the ENGINE START/STOP button. When the transmitter is learned, the DIC display will show that it is ready to program the next transmitter.7. Remove the transmitter from the transmitter pocket/insert and press unlock or lock on the transmitter.To program additional transmitters, repeat Steps 5–7. When all additional transmitters are programmed, press and hold the ENGINE START/STOP button for approximately 12 seconds to exit programming mode.8. Return the key back into the transmitter.

I’ll admit it—I misplace things more often than I’d like. So when my original key fob went missing, I needed a replacement ASAP. After searching around, I found this one, and honestly, it saved me from a whole lot of stress.At first, I was a little nervous about setting it up, but it turned out to be surprisingly simple. If you've ever worried about programming a key fob, just know that with the right instructions—or a quick trip to a locksmith—you’ll be good to go.Beyond just working perfectly with my truck, I really appreciate how solid and well-built it feels. The buttons have a satisfying click, and the signal is strong and reliable—no more awkward moments where I’m standing outside my truck, pressing the button like crazy, hoping it works.Another thing? It’s way more affordable than getting one from the dealership, but it still feels high-quality. I love that I didn’t have to sacrifice performance just to save a few bucks.If you’ve lost your fob, need a backup, or just want a stress-free solution, this one does exactly what it’s supposed to—without any hassle. Honestly, it's one of those things that makes life just a little easier, and I’m grateful for that.

Look up Igor Pires' review on this exact key fob. He'll walk you through the 7 steps to program the key fob!(The hidden slot for the key programming is on the middle, bottom storage area. Mine, an LT, was a small slot the exact size of the key fob towards the back. I faced the buttons toward the back.)Worked perfectly!!!!

Work great after program them can get info off tube

Perfect replacement transmitter. My transmitter went out after 4 years. The dealership wanted $180 for a new transmitter and more money to program it. I was left with only 1 working transmitter, I was hesitant to order this one but after reading a few reviews and the instructions on how to program it I ordered it and happy to say it works. The key is not cut so if you need a new key then you have to take it to a locksmith, but the transmitter works just fine after you program it. If you only have 1 transmitter then you need to follow the instructions provided here by another reviewer "Igor Pires". It will take you about 30 minutes, but be patient and follow the instructions. They work.

Exactly same fob as my original minus the GMC logo. Unfortunately the programming did not work for my truck. That part I don't understand. Truck doesn't do anything when following instructions. Instead just used this case with old remote board and functioning again.

It works easy learn 100% recommended product and seller

Excellent product. Looks and feels just like the original but without the Chevy bowtie on the back. Same weight and quality. This is an additional back up key fob. Programming was a breeze since I had two working key fobs. It is a great deal compared to what the dealer was charging.