Metal Durable High Flow Shower Filter, 90% dechlorination effect, adsorbs heavy metals, balances the ph level of the water, relieves your skin from dryness, Matte Black Showerhead Filter

This is the one! Easy install, includes Teflon tape. I have very, very slight leakage at the top of the unit but that's probably user error. It's not enough to take it off and retape it.My skin and hair feel unbelievably soft and good compared to showering without a filter! Can't recommend this item enough.And, not having to breath in aerosolized toxins is priceless.

The media could not be loaded. I tried the water and the filter does filters it. That is what matters the most.. lets see how long does it work for!

I live in St Pete, FL in a fairly new building.I used the "Drinking Water Test Kit w/ 21 parameters" from Amazon to check the water.Tap water ranked at about 80-100 on hardness, about 8.0 on pH, with all other markers of minerals, etc, being within parameters.The KITCH parctically did not change anything from the tap water test strip. Water hardness was the same and pH was the same. There was a very minor reduction of chlorine.The ANDAO did the best at lowering total chlorine down to a 1.Once again did nothing for pH or water hardness. The alkalinity was still around 100, which was within the parameters marked on the tube, but the water fell at about 100 on hardness. It lowers the QUAT/QAC reading from about 20 to <10.The 20-in-1 filter performed the same as other 2, in the sense that pH and hardness were not affected.The AQUABLISS did not appear to alter the water hardness, however alkalinity did go down to about 40! This was the only filter I tested that reduced alkalinity. The pH was only mildly affected by this, going down to about 7.8. All other markers were within recommended parameters but not significantly changed from original tap test strip.All the filters did a good job with fluoride.Note:Just to make sure the testing strips were not defective, I tested a bottle of purified water. The pH immediately showed up as 6.0, 25 on hardness (which ranks as soft), 0 on chlorine, 0 on alkalinity.

Water pressure is good , quality is good, it was easy to install.

After about just one week you can see calcium and chlorine on my shower head which is black. I was expecting this to clean it much better

this filter took up a lot of room under my showerhead, and the filter just did not last as long as it was supposed to under normal use.

It's very easy to use and installation.recommend It!

I recently bought a cheaper one. We had about 5 showers before it clogged and we couldn’t get any water out of our shower- of course in mid shower. So I bought this one. I have had no issues with clogging so far but it doesn’t work as well as the other one. My skin is still really dry after this and I can’t tell if it’s making any difference at all really