SIRUI SQ75+VHS10 Carbon Fiber Video Tripod Kit, Professional Heavy Duty Fluid Head Tripod, 182cm with 7-Step Counterbalance, 4-Step Pan/Tilt Hydraulic Damping, Both for RS Series & MFT, Max Load 10kg

I like it. its my first tripod and it feels properI recommend

This SIRUI Heavy Duty Tripod Dolly comes in a reasonably strong bag with a shoulder strap so that you can carry it out of a car, over your shoulder instead of having to tuck it under your arm. The dolly itself also has a handle on it, making it easier to carry.The tripod's feet are clamped onto the top of the legs at the ends and you can change the lengths of the legs in the same way that you would change the lengths of the tripod's own legs - the dolly's legs have markings on them so that you can easily get them to be the same length. My only real criticism of this is that the screws for the tripod foot clamps don't have a quick release on them so this cam be a lot of work - the two example tripods that I used were: a tripod for still photographs which has fairly small feet; and, a video tripod which has fairly large feet. In reality, you would tend to use just one tripod so this wouldn't be as much as an issue.The castors are very mobile and each one can be locked which not only locks the wheel but also the axle so it ends up being locked in a direction as well as a position.Being designed the way that it is, it is possible to tilt the mounted tripod at an angle so that it leans forwards so that you can get up close when otherwise, you would be prevented from doing so.This tripod dolly particularly useful if you need to move your tripod around because with this, it becomes so easy.

I stepped up to this after using heavy duty photography tripods for mirrorless video work. This is a significant upgrade but as a newcomer to video tripods I found the following - using a spreader is mandatory, not optional - which will not be intuitive if like me you have only had experience with photography tripods. If you need to use this on uneven ground a mid level spreader is essential - Sirui do a great one, however it cannot be kept attached when the tripod is collapsed, unlike the ground level one. The handle is very useful but you will need additional tools (or just a way to extend the supplied allen key for additional torque) to tighten the screw enough to keep it secure.If you want to use the Arri mounts in the plate at the top of the legs, be sure to use slim fitting accessories - I tried using small rig magic arm connections and found them too wide to fit into the very snug recessed attachment points. I found success with a Neewer Lightweight Magic Arm (https://www.amazon.co.uk/dp/B0D2SRYK7M?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1).The VHS-10 head is excellent though if you change the friction settings on the fly you will find they appear very loose at first - the solution to this (as other reviews have said) is just to exent the head through the full range of motion in the axis that you've adjusted - obviously not great if you're recording at the time so better to get your setup settled before starting a recording.I would have preferred the bag to be a little better balanced with some padding / restraining straps, and the restraining clips attached to the tripod legs themselves (used for storage / transport) look like they may not be very sturdy in the long term (I have supplemented this with a bungee loop to keep the legs bound securely).removing and fitting feet into the foot spikes is relatively straightforward, though if you plan to use a dolly you will need to use one which accommodates the spikes (Sirui also produce a compatible dolly - although fitting the tripod securely with the rubber loops requires both technique and a bit of hand strength)Overall I am pleased with my upgrade to this tripod system but it is fundamentally different to using a photography based tripod. The range of height, especially at the tall end, exceeded my expectations.

Not worth it. Even bag is so small to put the tripod in, also missing strap, not easy to carry around. I think, and my advice, look for something else. There is better tripods on the market.

So the description states this is a:-SIRUI Photography tripod dolly. Heavy duty tripod wheels with 3" rubber wheels. Adjustable leg mount and carry bag for DSLR cameras camcorder photo video lighting ~ 33 lbs Capacity.Attaching this to the base of our tripod has helped making the transition while filming and taking photos much easier and constant.I love taking photos as a hobby and currently been helping my nephew take photos of cars he has for sale but also some car parts.It's like going to the next level of professionalism because the dolly just glides and moves where and when needed. The 360° wheels have locked t9 keep in place also, comes with a storage bag for when not being used and easy transportation.The price at the time of this review is £49.00pSo far so goodBut I will update this review if needed.*** Detail's* Brand:- Sirui* Quantity:- 1* Form:- Tripod dolly* Capacity:- 33 lbs* Extendable legs:- 11.4" to 16.7"* Folded size:- 16.9" x 5.9"* Wheels:- 3 x 3” x 360° rotation* Material:- Aluminium* Item weight:- 1.8kg* Compatible devices:- CamcorderCameraVideo tripod* Feature:- PortableLightweight

Very good tripod but is pricey