ArmorSuit 6 Pack for Garmin Forerunner 965 (47mm) Screen Protector MilitaryShield HD Clear TPU Film - Made in USA

This is the second time I bought this product. After I bought my Fitbit I was looking for something to protect my new watch. First I purchased A different brand. That product was horrible. It came with three protectors and I could not get any of them to work. I finally gave up trashed the whole idea and decided to look for another brand. When I saw Armor Suit Military Shield I thought I would give it a try. I have been so happy. I put a shield on my watch and it worked pretty well the first time I tried. The only problem was that I used too much moisture the first time. That one lasted two or three weeks. I am very hard on my watch and that is why I needed to protect it. I work hard at work and it takes a lot of beating. The second shield that I put on my watch lasted a very long time. I would say it lasted 4 to 5 months. I got paint transfer on it that I could not to get off. I work at an auto body shop and car paint It’s very difficult to get off of something once it is on it. I went to put a new shield on my watch and discovered that I could not remember where I put the box with the rest of the shields. So I ordered a new box of shields. This time when I put on the shield it went on very easy. A little practice made perfect. I am including a photo of my watch. This shield has been on a month and like I said my watch takes a beating and I get lots of paint transfer, dirt, grime and oil from work. I also sanitize everything so it has taken a lot of sanitizer which degrades about everything. As you can see after a month of abuse and sanitizer it still doesn’t look too terribly bad. I definitely recommend this product especially if you are very hard on your watch. The shield has taken all of the abuse and my watch face looks brand new.

I purchased this ArmorSuit 6-pack for my Garmin 265, and so far I’m genuinely impressed. The installation was quick and completely bubble-free, and the fit is absolutely perfect, almost like it came built into the watch from the factory. I’ve been using the first protector for about a week now, and it still looks flawless with no lifting or scratches. I also really appreciate that the pack includes six protectors, which adds a lot of value. It gives me peace of mind knowing I have several backups ready to go whenever the current one eventually wears out. I’m hoping this helps extend the life of my watch screen and keep it protected from everyday bumps, sweat, and workouts. I’ll make sure to come back in a few months to update how long this first protector lasted before needing a replacement. So far, though, this has been a great purchase and one I definitely recommend to other Garmin users looking for reliable screen protection.

10/10 packaging 10/10 prep materials 7/10 ease of use Packaging was great, included installation liquid spray, a rubber squeegee, and lint free cloth. The instructions are for an apple watch, but could be applicable to all watches technically. Per the instructions, I cleaned my hands, cleaned the watch surface, sprayed my fingers, then sprayed the screen protector on both sides and applied it. While the soapy liquid was still wet, everything applied easy. But as the liquid started to dry, I noticed little bubbles.. and per the instructions, ignored them thinking it'd go away. But after it fully dried, there were tiny little lint hairs under the screen protector. I have a bit of OCD when it comes to these things, so I tried to fix it multiple times, but each time, it got worse.. Aside from that though, the screen protector covered my Garmin Vivoactive 5 perfectly with about half a millimeter of space around. There's no adhesive, just more of a "static cling" type thing, but it seems to stay on fine even when wet. As long as you don't use a fingernail or some sort of sharp edge that could push up the side of the protector, it should stay on without any issue. Protection-wise, it's just like any other "soft film" type protector you'd expect. Protects the surface from scratches, but not hits. Overall, it works well and if applied correctly, it'd look great too. I just wished that there was some sort of additional application tool/sticker that could prevent lint/small specks from being stuck under the protector.

Got this about 30min ago so cant speak to its longevity, you get 6 anyway. Installation was very easy. I was a bit worried by some of the reviews. The paper instructions are a general guide, I didnt watch the video. Took about 5mins to do. 0 bubbles, 0 issues. They are clearly designed to be used with a case. I have the Spigen Liquid Air case, take the case and band off first. The only thing I did different in the instructions was use the squeegee in a clockwise, center out motion. Since my watch is circular, not square like it shows. Do this gently. I did 3 rotations. Then one more firm, but not to firm, to ensure all liquid is out. Lightly dabbing the sides with the cloth as I went each time. Then hold the watch with 2 fingers in the center. Take the cloth and grip the outside, spin the watch multiple times with a decent grip on the cloth. This locks it into place a keeps the edges secured down. There should be a couple mm extra space around the sides, this is for fitting the case on. Now to hope it does its job properly if I have any accidents. As a side note, the material used as listed is TPU(thermoplastic polyurethane). If you want to take it off, hit it with some heat first to loosen it. Hope this helps, saw many reviews with people having various issues.

I was skeptical about the ArmorSuit Screen Protector when I first took it out of the box. The application process on the watch was relatively straight forward, and once installed I don't really even notice that it is there. I've scrapped my watch against several surfaces since installing and it seems to be doing a good job of protecting my watch. Occasionally it gets small air bubble or even looks scratched when I bump it but the "self healing" property of the material brings it back to normal within a few hours. If there's air bubbles I simply use my fingernail to scrape them to the edge and they disappear. I've had this installed for almost 4 months and will continue to use this product. At this price point if they get scratched or come off they are cheap and easy to repair.

This is a clear film and with normal use, I have to swap it out about once a month. Since it is simply a plastic film, it is highly suspectable to scratches, stretching and warping when coming into contact with any chemical (solvents, like alcohol, bleach, petroleum-based products) that can warp plastic. My first screen only lasted a week because I didn't know that cleaning the screen with a microfiber cloth would scratch it. I've ordered some of the replacements through the warranty, but it’s not free. It will cost you $3.49. Does it protect the screen? Yes, but having to swap them out once a month is annoying. I'm not certain I will keep using them despite the warranty. On my previous Garmin watches I used the glass ones and they worked great.

While working in the yard I bumped the screen of the watch directly against a metal T-post. It was hard enough to gouge the protector surface, and peel it slightly. I removed the protector and checked, the screen was undamaged. They definately work at least for this type of situation. They install easily, although you should have plenty of time when you do it. Wetting your fingers and the watch surface with the spray included as instructed will prevent finger prints on the protector. They will move around freely for a several minutes then suddenly start to adhere, at that point it needs to be in place and have the bubbles pressed out. They do look cloudy when you first install them, but by the next day it looks perfectly clear and any small bubbles seem to go away. So far the edges are staying put very well on a Pixel with a curved edge. I did try a tempered glass cover originally but it caused the screen to malfunction. This one has no noticable affect on the touchscreen performance as far as I can tell. I will definately buy more once this package is used up.

Some of the negative reviews here are a bit confusing. I'm writing this one primarily to set a few records straight. First of all, these screen protectors are stickers. They're thin plastic. Their purpose is to add a layer of cheap material over your expensive glass screen in order to prevent scuffs, scratches, chips, etc. The reason you get six in the package is that these are not supposed to be durable! They're expendable and disposable. You use one until it wears out, then you use another. Second, installation is an absolute breeze. I've used lots of these sorts of products for my devices over the years and this one had one of the easiest installations I've ever done. Anyone who is complaining that it took them four tries or whatever, didn't bother actually watching the installation video. The protector also wraps around the curvature of the Versa 2 just fine. Again, you need to watch the video and do it at the right time. I recommend watching both the watch video and the "curved device" video as you'll get tips in each. Here's a quick run-down of how to properly install: - First of all, you need a dust-free area. A good tip for this is to use your bathroom, immediately after a shower. The water vapor will drag a lot of the dust out of the air. - Second, make sure your hands are clean and oil-free. See the shower tip. - Next, use scissors and cut out one protector -- you'll be spraying it with a bunch of liquid and there's no reason to get the adjacent ones wet. - Now spray the watch face with the included solution. One spray seems to be sufficient here. - Now spray the fingers on both of your hands. Don't worry, the solution doesn't smell especially bad. - Now spray the front of the protector. - Now use your wet fingers and peel up the protector and liberally spray the back. - Finally, put the protector in place on the watch. Slide it around a bit into position. Hold half of it in place with your thumb and squeegee the liquid out from the other half. The protector will shift a bit. Gently push it back into place. Then hold and squeegee again, in a different direction. (I alternate Up-Right-Down-Left when doing this so I get equal coverage.) - Keep repeating the above step until the protector starts to stick to the watch. Then give it a couple of final swipes with the squeegee. - The curved edges will not be in place at this point. That's okay! Put the watch down and walk away for 15 minutes. - Now come back and using the microfiber cloth gently polish/press the protector, from the middle outward, all the way into the curved edges. They'll stick. Push them evenly around the face of the watch and all will be great. - And finally, wait 8 hours. Come back and give the edges another little pass if you need to. I'm deducting one star primarily for that 8 hour wait. I've never had to do that before. The installation instructions mention a hair dryer for quicker drying but they also mention simply doing this right before bed, and that seems to be an easier and perhaps better option. Once in place, the screen protector is crystal clear and doesn't interfere in any way with using your watch. Which is really all you can ask for. I'd like these to be ever-so-slightly wider. They don't quite cover the entire glass face of the watch. (They're short by maybe 1mm.) That's fine from a usability perspective and you can barely see it but I think a bit more edge-to-edge coverage would help improve snag resistance. These sorts of protectors, for me, always seem to wear out at the side because a bit of lint or dirt gets under the edge and destroys adhesion, so having the protector right up against the metal would help. Anyway, that's that. Easy install, great clarity, does what it's supposed to do. No real complaints except the 8 hour set time, but even that is not a very big deal. Good product.

Bought based on reviews but very disappointed. Installed as per install video but the screen protector doesn't adhere to curved screens well. Bought for my versa 2 and only got a week out of it before I had to put a new one on.

These are easy to install and have worked well. No complaints with ArmourSuit for any of their products we've used.

Fast shipping, easy to apply. Very pleased

It’s just a plastic…. It’s not staying on the watch